Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Outboard Motor Parts | OEM & Aftermarket

Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.

Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.

 

Shop Outboard Parts by Manufacturer

 

Find the Correct Outboard Part

Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.

Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »
 

Shop Outboard Parts by Engine System

Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.

 

Common Outboard Problems and Where to Start

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
  • Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
  • Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
  • Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
  • Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
  • Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
 

Why Buy Outboard Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for major outboard engine brands.
  • Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
  • Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
 

OEM and Aftermarket Outboard Parts

OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.

Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.

 

Frequently Asked Questions

How do I find the correct parts for my outboard motor?

Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.

Can I search Pro Marine by OEM part number?

Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

What information should I have before ordering an outboard part?

Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.

What is the difference between OEM and aftermarket outboard parts?

OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.

Are aftermarket outboard motor parts reliable?

Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.

Do you carry parts for older outboard motors?

Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.

What outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.

 

Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.

|◀ ◀ 6637 - 6648 of 8459 ▶ ▶|
View:
Force 75hp/90hp
Item#:
9736
Cross Reference#:
FK10323
FK10323
FK10323
FK10323
809736A1
Manufacturer Item:
809736A1
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
6.25
Each
Hydraulic Steering Cylinder Bleed Kit for Pro Marine SeaStar & Uflex System

Hydraulic Steering Cylinder Bleed Kit

Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit

The Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit is designed to simplify hydraulic steering system bleeding and service procedures for marine hydraulic steering applications.

This bleed kit is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.

What a Hydraulic Steering Bleed Kit Does

A hydraulic steering bleed kit helps remove trapped air from the steering system during installation, maintenance, or repair procedures.

Proper bleeding allows hydraulic fluid to fully circulate through the helm, hoses, and steering cylinder, helping restore smooth steering feel and consistent steering response.

Pro Tip: Air trapped inside a hydraulic steering system can cause soft steering feel, steering hesitation, noise, or inconsistent steering response. Proper bleeding is one of the most important steps during hydraulic steering installation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Hydraulic Steering Installation Bleeding air from newly installed steering systems
Hydraulic Steering Service Routine steering maintenance and repairs
Steering Cylinder Replacement Bleeding the system after cylinder installation
Repower Projects Completing hydraulic steering upgrades
Marine Repair Shops Professional hydraulic steering service work

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Hydraulic Fluid

Use quality hydraulic steering fluid during steering filling and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Fill Hose Assembly

Fill hose assemblies simplify steering fluid filling and help maintain fluid supply during bleeding.

View 102P Fill Hose Assembly

Hydraulic Steering Components

Shop compatible helm pumps, cylinders, hydraulic hoses, and steering service components.

Shop Hydraulic Steering Components

Key Features and Benefits

  • Designed for hydraulic steering system bleeding
  • Helps remove trapped air from steering cylinders and hoses
  • Improves steering response and steering feel
  • Useful during installation and maintenance procedures
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Useful for marine technicians and DIY boat owners
  • Helps simplify hydraulic steering service work

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Hydraulic steering bleed kit
  • Function: Steering system bleeding and air removal
  • Connection Type: Steering cylinder bleed fittings
  • Typical Use: Hydraulic steering installation and maintenance
  • Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
  • Related Components: Helm pumps, steering cylinders, hydraulic hoses, fill hose assemblies, and steering fluid

FAQ

What does a hydraulic steering bleed kit do?
A bleed kit helps remove trapped air from the hydraulic steering system during installation or service procedures.

Why is bleeding hydraulic steering important?
Proper bleeding removes trapped air that can cause soft steering feel, inconsistent response, or steering noise.

What steering systems is this compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar systems.

Can this be used for new steering installations?
Yes. Bleeding is required during most new hydraulic steering installations and cylinder replacements.

Is this useful for DIY steering service?
Yes. This bleed kit helps simplify the steering bleeding process for both professional technicians and DIY boat owners.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-BLEEDKIT, hydraulic steering bleed kit, hydraulic cylinder bleed kit, Pro Marine bleed kit, SeaStar bleed kit, Uflex bleed kit, steering cylinder bleed hose, hydraulic steering service kit, hydraulic steering maintenance tools, steering bleed fittings

Item#:
350-BLEEDKIT
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
66.22
Each
Item#:
350-HSTEER-ROD
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
318.27
Each
This item is discontinued
Mercury 30-300hp Force 40-120hp
Item#:
1487
Cross Reference#:
18-0970
32960
509261
8M0204705
9-60054
98769
987691
Manufacturer Item:
8M0204705
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.94
Each
Force 50-120 SportJet 120 Chrysler 35-140
Item#:
5323
Cross Reference#:
FO5323
Manufacturer Item:
FO5323
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
3.99
Each
Tigershark 640cc, 900cc Suzuki 40hp
Item#:
B1024
Cross Reference#:
09263-20L06
09263-20055
09263-20072
18-1417
3003-433
Manufacturer Item:
09263-20072
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
23.99
Each
Yamaha 9.9-90hp Suzuki Mercury 15-45hp 4Str
Item#:
2124
Cross Reference#:
31800-94400
31800-94401
31800-95501
31800-95502
31800-95510
5030783
6G1-8194A-10-00
6G1-81940-00-00
6G1-81941-10-00
8M0098898
825096
825096T
825096T01
84932M
881352T
95642M
96356M
Manufacturer Item:
6G1-81941-10-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
31.95
Each
Kawasaki 650,750,800cc Yamaha 60/70HP 3 Per C-shaft
Item#:
6306
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.08
Each
Yamaha Kawasaki
Item#:
6307NRC4
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
22.45
Each
Yamaha 40-50hp Seadoo 580/650/720 Mag / Inner
Item#:
6206NRC4
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
11.19
Each
Item#:
92072
Manufacturer:
Universal
Available:
Special Order
Your Price:
28.60
Each
This item is discontinued
All Uflex Tilt Helms
Item#:
X52
Cross Reference#:
SH91500
702755022237
Manufacturer Item:
889934A04
Manufacturer:
Uflex
Available:
In Stock
Your Price:
218.43
Each
|◀ ◀ 6637 - 6648 of 8459 ▶ ▶|
View: