S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | Mercury, Yamaha, Suzuki & More
Shop outboard motor parts for maintenance, repair, troubleshooting, and full marine engine rebuild projects. This category includes OEM parts and quality OEM specification aftermarket products from Pro Marine, along with replacement marine parts for Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard engines.
Use this section to browse outboard parts by brand and engine system, including cooling, fuel delivery, ignition and electrical, intake, internal engine components, lower unit parts, steering, trim, transom, midsection, engine oil, service kits, gaskets, seals, carburetor parts, water pump parts, and rebuild components.
Shop Outboard Categories
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-tec Outboard OMC, Johnson, Evinrude, and E-tec parts 
Mercury Outboard Mercury and Mariner service and rebuild parts 
Suzuki Outboard Suzuki maintenance, lower unit, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha service, repair, and rebuild parts Common Outboard Parts Found in This Category
- Water pump kits, impellers, thermostats, and cooling system parts
- Carburetor kits, fuel pumps, fuel filters, and fuel system components
- Ignition coils, stators, switch boxes, rectifiers, sensors, and electrical parts
- Pistons, piston rings, bearings, crankshafts, sleeves, gaskets, and rebuild parts
- Lower unit seals, bearings, gears, driveshaft parts, and gearcase components
- Steering parts, control cables, trim parts, and transom components
- Engine oil, gear lube, service kits, spark plugs, seal kits, and routine maintenance parts
Common Outboard Problems and Where to Start
- Overheating: inspect the water pump, impeller, thermostat, cooling passages, and engine anodes.
- Hard starting or rough idle: check carburetor parts, fuel delivery, ignition components, spark plugs, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes, sensors, wiring, and related electrical components.
- Low compression or poor power: inspect pistons, rings, gaskets, cylinder condition, bearings, and internal engine components.
- Milky gear lube or gearcase noise: check lower unit seals, bearings, gears, driveshaft parts, and prop shaft components.
Frequently Asked Questions
What is the difference between OEM and aftermarket outboard parts?
OEM parts are made by the original engine manufacturer. Aftermarket parts are replacement parts made by other manufacturers to fit the same application. Pro Marine provides quality OEM specification aftermarket products designed for marine maintenance, repair, and rebuild work.
How do I find parts for my outboard engine?
Start by selecting your outboard brand, then choose the correct engine system category. Use your model number, serial number, horsepower, and year range to confirm fitment before ordering parts.
What information do I need before ordering outboard parts?
You should have the engine manufacturer, horsepower, model number, serial number, and any OEM part numbers from the original component when available. This helps avoid ordering parts that look similar but fit a different engine family.
Are aftermarket outboard parts reliable?
Yes, quality aftermarket outboard parts are commonly used by marine mechanics and rebuilders. Pro Marine offers OEM specification aftermarket products for many common outboard repair, maintenance, and rebuild applications.
What brands are included in the outboard category?
This category includes Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard parts.
Tip: Before ordering outboard parts, confirm your engine brand, horsepower, model number, serial number, and year range whenever possible.
OEM Mercury 300-Hour V6 Service Kit with Oil & Gear Lube
Mercury 8M0149930-L Service Kit for 3.4L V6 FourStroke Outboards
The Mercury 8M0149930-L 300-Hour Service Kit is designed for Mercury 3.4L V6 FourStroke outboards.
This OEM Mercury maintenance package includes the major 300-hour service replacement components along with Mercury 10W30 engine oil and Mercury gear lube for a more complete service package.
Compatible Applications
| Engine Family | Engine Size | Engine Type | Application Notes |
|---|---|---|---|
| Mercury FourStroke | 3.4L V6 | FourStroke Outboards | Fits compatible Mercury 3.4L V6 FourStroke outboards |
Always verify your exact engine model and serial number before ordering maintenance kits or replacement service parts.
What is Included
- OEM Mercury oil filter
- OEM Mercury fuel filter
- Oil drain seal
- Spark plugs
- Thermostat
- Alternator belt
- Anodes
- Water pump repair kit
- Mercury 10W30 engine oil
- Mercury gear lube
OEM Part Numbers & Cross References
| Brand / Type | Part Number |
|---|---|
| Mercury OEM | 8M0149930-L |
| Related Kit Without Oil | 8M0149930 |
| Application | 300-Hour V6 Service Kit with Oil & Gear Lube |
Prefer a Different Oil Weight?
This version includes Mercury 10W30 engine oil and Mercury gear lube.
Some customers prefer ordering their service kit without oil so they can choose a different Mercury oil weight or oil type.
If you would rather choose your own oil separately, see:
Related Anode Kit
Mercury 3.4L V6 FourStroke outboards use the Mercury aluminum anode kit shown below.
For replacement aluminum anodes, see:
Mercury 8M0205955 Aluminum Anode Kit
What This Service Kit is Used For
This Mercury 300-hour maintenance kit is designed for scheduled service on compatible Mercury 3.4L V6 FourStroke outboards.
Regular maintenance helps support long-term reliability, cooling system performance, fuel system operation, and corrosion protection.
Mercury packages the required 300-hour service components together to simplify maintenance and reduce the need to source parts individually.
Key Features and Benefits
- Genuine OEM Mercury 300-hour maintenance kit
- Fits Mercury 3.4L V6 FourStroke outboards
- Includes oil filter, fuel filter, and oil drain seal
- Includes spark plugs, thermostat, alternator belt, and water pump repair kit
- Includes aluminum anodes
- Includes Mercury 10W30 engine oil and gear lube
- Convenient all-in-one maintenance package
- Produced to Mercury OEM specifications
Service Kit Details
- Brand: Mercury / Quicksilver
- Part Number: 8M0149930-L
- Part Type: 300-Hour Service Kit with Oil & Gear Lube
- Application: Mercury 3.4L V6 FourStroke Outboards
- Includes Oil: Yes
- Includes Gear Lube: Yes
- Quantity Sold: Kit
FAQ
What engines does Mercury 8M0149930-L fit?
This kit fits Mercury 3.4L V6 FourStroke outboards.
Does this kit include engine oil?
Yes. This version includes Mercury 10W30 engine oil.
Does this kit include gear lube?
Yes. Mercury gear lube is included.
What parts are included in this 300-hour service kit?
The kit includes an oil filter, fuel filter, oil drain seal,
spark plugs, thermostat, alternator belt, water pump repair kit,
anodes, engine oil, and gear lube.
Which anode kit goes with this engine?
This application uses Mercury aluminum anode kit 8M0205955.
Is there a version without oil and gear lube?
Yes. Mercury 8M0149930 includes the same 300-hour maintenance parts
without engine oil and gear lube.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Service kits should be verified for correct fitment before installation.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0149930-L, Mercury V6 300 hour service kit, Mercury 3.4L V6 maintenance kit, Mercury FourStroke maintenance kit, Mercury spark plug service kit, Mercury thermostat service kit, Mercury water pump repair kit, Mercury alternator belt kit, Mercury anode service kit, Mercury oil filter fuel filter kit, Mercury 10W30 oil kit, Mercury gear lube kit, 8M0149930, 8M0205955
92901-16200-00
92990-16200-00
92990-16600-00
OEM Mercury V12 Verado 200 Hour Service Kit
Mercury V12 Verado 200 Hour Service Kit
The Mercury 8M0179987 200 hour service kit is designed for scheduled maintenance on compatible Mercury V12 Verado outboards. This kit helps simplify routine service by grouping commonly replaced maintenance components together in one convenient package.
Regular 200 hour maintenance helps support proper cooling, fuel system cleanliness, corrosion protection, lubrication, and long-term Mercury V12 Verado performance.
Compatible Applications
| Brand | Engine Family | Horsepower | Application Notes |
|---|---|---|---|
| Mercury | V12 Verado FourStroke | 600HP | Compatible Mercury V12 Verado models |
Mercury recommends routine scheduled service intervals to help maintain performance, reliability, and corrosion protection on V12 Verado outboards.
Always verify engine model and serial number before ordering service parts.
What is Included
| Included Component | Application |
|---|---|
| Oil Filter Service Components | Engine oil maintenance |
| Fuel Filter Service Components | Fuel system maintenance |
Recommended Oil & Gear Lube
Engine Oil Requirement:
Mercury SAE 10W30 Full Synthetic Marine Engine Oil
Capacity: Approximately 14 quarts or 4 gallons
Mercury SAE 10W30 Full Synthetic Marine Engine Oil
Gear Lube Requirement:
Mercury Premium Gear Lube SAE 80W90
Capacity: 4 quarts
Mercury V12 Verado outboards include a transmission system that requires periodic transmission fluid service and flushing.
The transmission uses ATF (Automatic Transmission Fluid).
We currently do not stock the required ATF transmission fluid.
Recommended V12 Anode Kit
Mercury V12 Verado Aluminum Anode Kit
Aluminum anode kit for Mercury V12 Verado outboards. Helps protect against galvanic corrosion in marine environments.
View ProductWhat This Service Kit is Used For
The Mercury 8M0179987 service kit is used for routine 200 hour scheduled maintenance on compatible Mercury V12 Verado outboards.
Scheduled service helps support engine lubrication, fuel system cleanliness, cooling system performance, ignition performance, and corrosion protection.
The Mercury V12 Verado platform includes advanced systems that benefit from routine scheduled maintenance intervals to help maintain long-term reliability and performance.
Proper maintenance also helps protect your investment and supports dependable offshore and high-load marine operation.
Key Features and Benefits
- OEM Mercury 200 hour service kit for V12 Verado outboards
- Designed for major scheduled maintenance intervals
- Supports lubrication, cooling, ignition, and fuel system maintenance
- Convenient grouped maintenance kit
- Helps support long-term reliability and corrosion protection
- Pairs with Mercury V12 anode kits and lubricants
- Compatible with Mercury SAE 10W30 Full Synthetic marine oil
- Supports Mercury V12 Verado routine maintenance schedules
Service Kit Details
- Part Number: 8M0179987
- Application: Mercury V12 Verado FourStroke Outboards
- Service Interval: 200 Hour Maintenance
- Recommended Oil: Mercury SAE 10W30 Full Synthetic
- Engine Oil Capacity: Approximately 14 quarts
- Recommended Gear Lube: Mercury Premium Gear Lube SAE 80W90
- Gear Lube Capacity: 4 quarts
- Transmission Fluid Type: ATF (Automatic Transmission Fluid)
FAQ
What engines does this service kit fit?
This service kit fits compatible Mercury V12 Verado outboards.
What oil should be used with the Mercury V12 Verado?
Mercury recommends SAE 10W30 Full Synthetic Marine Engine Oil.
How much engine oil does the V12 Verado use?
The Mercury V12 Verado uses approximately 14 quarts of engine oil.
What gear lube does the V12 Verado use?
Mercury Premium Gear Lube SAE 80W90 is recommended.
How much gear lube is required?
The Mercury V12 Verado gearcase uses approximately 4 quarts of gear lube.
Does the Mercury V12 Verado use transmission fluid?
Yes. The V12 Verado transmission requires ATF (Automatic Transmission Fluid) service and periodic flushing.
Do you stock the transmission fluid?
No. We currently do not stock the required ATF transmission fluid.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Opened oil, lubricants, installed parts, and used maintenance items may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0179987, Mercury V12 Verado service kit, Mercury V12 200 hour service kit, Mercury V12 maintenance kit, Mercury V12 oil change, Mercury V12 gear lube, Mercury V12 transmission fluid, Mercury V12 ATF, 8M0173224, Mercury 10W30 full synthetic marine oil, 858058K01, Mercury Premium Gear Lube 80W90, 8M0179981, Mercury V12 anode kit, Mercury 600HP Verado maintenance
OEM Mercury 40-60HP 300 Hour Service Kit With Oil
Mercury 40-60HP 300 Hour Kit Standard Gearcase
The Mercury 8M0113483-L 300 Hour Service Kit is a complete maintenance package for Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards with serial numbers 1C000001 and higher equipped with standard gearcases.
This 300 hour maintenance kit includes the required service components along with Mercury 10W30 engine oil and gear lube for scheduled maintenance service.
Compatible Applications
| Brand | Horsepower | Engine Type | Gearcase Type | Serial Range |
|---|---|---|---|---|
| Mercury | 40HP | FourStroke EFI Outboard | Standard Gearcase | 1C000001 & Higher |
| Mercury | 50HP | FourStroke EFI Outboard | Standard Gearcase | 1C000001 & Higher |
| Mercury | 60HP | FourStroke EFI Outboard | Standard Gearcase | 1C000001 & Higher |
This Mercury 300 hour service kit fits Mercury 40-60HP FourStroke EFI outboards with serial numbers 1C000001 and higher equipped with standard gearcases only.
If your engine has a BigFoot or Command Thrust gearcase, use the BigFoot / Command Thrust kits linked below instead.
What is Included
| Included Component | Application |
|---|---|
| Oil Filter | Engine oil filtration service |
| Fuel Filters | Fuel system maintenance |
| Spark Plugs | Ignition system maintenance |
| Water Pump Components | Cooling system service |
| Thermostat Components | Cooling system maintenance |
| Drain & Vent Seals | Gearcase service |
| Mercury 10W30 Engine Oil | Engine oil service |
| Mercury Gear Lube | Gearcase lubricant service |
Prefer to Choose a Different Oil?
Some customers prefer to purchase a different Mercury oil, including Mercury 25W40, Synthetic Blend, or Full Synthetic options.
If you prefer to choose your own engine oil and gear lube, order the standard 300 hour kit below.
Order 8M0113483 - Oil and Gear Lube Sold SeparatelyIncluded Oil & Gear Lube Information
This kit includes Mercury 10W30 engine oil and gear lube for the complete 300 hour maintenance service.
Mercury 40-60HP FourStroke EFI engines use approximately 4 quarts of engine oil, or 1 gallon.
Standard gearcase applications use approximately 1 quart of gear lube.
BigFoot / Command Thrust 300 Hour Kits
300 Hour Kit - BigFoot / Command Thrust
Use this kit for Mercury 40-60HP EFI outboards with BigFoot or Command Thrust gearcases. Oil and gear lube sold separately.
View Product
300 Hour Kit With Oil - BigFoot / Command Thrust
Complete 300 hour maintenance kit with oil and gear lube for compatible BigFoot and Command Thrust gearcase models.
View ProductWhat This Service Kit is Used For
The Mercury 8M0113483-L service kit is used for 300 hour maintenance on compatible Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards equipped with standard gearcases.
A 300 hour maintenance service is more extensive than a standard 100 hour service and commonly includes fuel system maintenance, cooling system service, spark plug replacement, water pump service, oil service, and gearcase maintenance.
Key Features and Benefits
- OEM Mercury 300 hour service kit
- Fits Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards
- Fits serial numbers 1C000001 and higher
- For standard gearcase models only
- Includes Mercury 10W30 engine oil
- Includes gear lube for gearcase service
- Alternative kit available for customers preferring different oils
- BigFoot / Command Thrust kits linked above
Service Kit Details
- Part Number: 8M0113483-L
- Base Kit: 8M0113483
- Application: Mercury 40-60HP FourStroke EFI Outboards
- Serial Range: 1C000001 & Higher
- Gearcase Type: Standard Gearcase
- Service Interval: 300 Hour Maintenance
- Oil Included: Mercury 10W30
- Gear Lube Included: Yes
FAQ
What engines does this kit fit?
This kit fits Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards
with serial numbers 1C000001 and higher equipped with standard gearcases.
Does this fit BigFoot or Command Thrust gearcases?
No. BigFoot and Command Thrust kits are linked above.
Does this kit include oil and gear lube?
Yes. This kit includes Mercury 10W30 engine oil and gear lube.
What if I prefer a different oil?
Customers who prefer different Mercury oil options can order
the standard 8M0113483 kit and select their preferred oil separately.
How much engine oil does this motor use?
Approximately 4 quarts or 1 gallon.
How much gear lube is required?
Approximately 1 quart for standard gearcase models.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Opened oil and lubricants may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0113483-L, 8M0113483, 8M0090559, 8M0090559-L, Mercury 40HP 300 hour kit with oil, Mercury 50HP 300 hour kit with oil, Mercury 60HP 300 hour kit with oil, Mercury standard gearcase 300 hour kit, Mercury standard gearcase maintenance kit, Mercury 300 hour kit with 10W30, Mercury serial 1C000001 300 hour kit, Mercury FourStroke EFI 300 hour service, Mercury BigFoot 300 hour kit, Mercury Command Thrust 300 hour kit, Mercury 40-60HP maintenance kit with oil
OEM Mercury 100 Hour Service Kit With Oil
Mercury 5.7L V10 350HP-425HP Verado 100 Hour Maintenance Kit
This OEM Mercury 100 hour service kit with oil is designed for Mercury 5.7L V10 350HP-425HP Verado outboards. It includes the routine 100 hour maintenance components along with Mercury 25W50 engine oil for engine oil service.
Important: This kit includes engine oil, but it does not include gear lube. Mercury V10 standard rotation and counter rotation gearcases require different gear lube quantities, so gear lube should be selected separately below.
Compatible Applications
| Engine Platform | Horsepower Range | Displacement | Application Notes |
|---|---|---|---|
| Mercury Verado V10 | 350HP-425HP | 5.7L FourStroke | All Mercury 5.7L V10 Verado outboards |
This kit includes Mercury 25W50 engine oil, but it does not include gear lube.
Standard rotation Mercury V10 gearcases use approximately 1 quart of gear lube.
Counter rotation Mercury V10 gearcases use approximately 2.3 quarts, so customers should order 3 quarts for proper service.
If you do not want the kit with included 25W50 engine oil, use the no-oil version and select your oil separately.
View Mercury V10 100 Hour Service Kit Without Oil
What is Included
| Included Component | Application |
|---|---|
| OEM Mercury 100 hour maintenance components | Scheduled Mercury V10 service interval |
| OEM Mercury oil filter | Engine oil filtration service |
| OEM Mercury fuel filter components | Fuel system maintenance |
| OEM Mercury drain seals and service components | Routine maintenance replacement items |
| Mercury 25W50 engine oil | Engine lubrication service |
Gear Lube Options - Sold Separately
| Gear Lube | Product | Quantity Required |
|---|---|---|
| Premium 80W90 Gear Lube | Mercury Premium 80W90 Gear Lube | Standard rotation: 1 quart Counter rotation: 3 quarts |
| Extreme Performance 85W90 Gear Lube | Mercury Extreme Performance Gear Lube | Standard rotation: 1 quart Counter rotation: 3 quarts |
Complete Your Service
300 Hour Service Kit Without Oil
OEM Mercury 300 hour service kit for Mercury 5.7L V10 350HP-425HP outboards without engine oil or gear lube.
View Product
300 Hour Service Kit With Oil
Complete OEM Mercury 300 hour service kit with oil for Mercury 5.7L V10 350HP-425HP Verado engines.
View Product
Mercury V10 Anode Kit
OEM Mercury anode kit for Mercury 5.7L V10 350HP-425HP Verado outboards.
View ProductWhat This Service Kit is Used For
This OEM Mercury 100 hour service kit with oil is used for scheduled maintenance on compatible Mercury 5.7L V10 Verado 350HP-425HP outboards.
The included Mercury 25W50 engine oil helps simplify routine engine oil service while the OEM Mercury maintenance components support proper 100 hour service.
Because standard rotation and counter rotation gearcases use different amounts of gear lube, this kit does not include gear lube. Customers should choose the proper gear lube and quantity separately.
Customers performing service should also inspect anodes, gear lube, filters, and any 300-hour maintenance items depending on engine hours and service history.
Key Features and Benefits
- OEM Mercury 100 hour maintenance kit with engine oil
- Fits Mercury 5.7L V10 350HP-425HP Verado outboards
- Includes Mercury 25W50 engine oil
- Designed for scheduled 100 hour service
- Does not include gear lube
- Allows customers to select the correct gear lube quantity separately
- Pairs with Mercury V10 300-hour and anode maintenance kits
- Helps support long-term engine reliability and performance
Service Kit Details
- Kit Part Number: 8M0207807-L
- Brand: Mercury Marine
- Application: Mercury 5.7L V10 Verado Outboards
- Horsepower Range: 350HP-425HP
- Service Interval: 100 Hour Maintenance
- Engine Oil Included: Yes - Mercury 25W50
- Gear Lube Included: No
- Standard Rotation Gear Lube Required: Approximately 1 quart
- Counter Rotation Gear Lube Required: Approximately 2.3 quarts - order 3 quarts
- Related Maintenance: 300-hour service and anode replacement
FAQ
What engines does this 100 hour service kit fit?
This kit fits Mercury 5.7L V10 Verado 350HP-425HP outboards.
Does this kit include engine oil?
Yes. This version includes Mercury 25W50 engine oil.
Does this kit include gear lube?
No. Gear lube is not included because standard rotation and counter
rotation gearcases use different amounts.
How much gear lube should I order?
Standard rotation gearcases use approximately 1 quart. Counter rotation
gearcases use approximately 2.3 quarts, so order 3 quarts for
counter rotation service.
Is there a 100 hour kit without oil?
Yes. The 8M0207807 version does not include oil or gear lube and is linked above.
Should I also replace anodes during service?
Anodes should be inspected regularly and replaced when worn. The Mercury
V10 anode kit is shown above for complete corrosion protection service.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits and lubricants must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0207807-L, Mercury V10 100 hour service kit with oil, Mercury 5.7L V10 service kit, Mercury Verado V10 maintenance kit, Mercury 350HP service kit, Mercury 400HP service kit, Mercury 425HP service kit, Mercury V10 kit with oil, Mercury 25W50 oil, Mercury V10 gear lube not included, Mercury Premium 80W90 gear lube, Mercury Extreme Performance gear lube, Mercury V10 300 hour kit, Mercury V10 anode kit, Mercury Verado maintenance parts
OEM Mercury 40-60HP EFI 100 Hour Service Kit
Mercury 40-60HP EFI 100 Hour Kit Serial 1C000001-Present
The Mercury 8M0232733 100 Hour Service Kit contains the routine maintenance parts needed for Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards with serial numbers 1C000001 and higher.
This kit includes the oil filter, low-pressure fuel filter, high-pressure fuel filter, oil drain seal, and gearcase seals. Oil and gear lube are sold separately.
Compatible Applications
| Brand | Horsepower | Engine Type | Serial Range |
|---|---|---|---|
| Mercury | 40HP | FourStroke EFI Outboard | 1C000001 & Higher |
| Mercury | 50HP | FourStroke EFI Outboard | 1C000001 & Higher |
| Mercury | 60HP | FourStroke EFI Outboard | 1C000001 & Higher |
This Mercury 100 hour service kit fits Mercury 40-60HP FourStroke EFI outboards with serial numbers 1C000001 and higher.
Always verify your engine serial number before ordering maintenance parts.
What is Included
| Included Component | Application |
|---|---|
| Oil Filter | Engine oil filtration service |
| Low-Pressure Fuel Filter | Fuel system maintenance |
| High-Pressure Fuel Filter | Fuel system maintenance |
| Oil Drain Seal | Oil drain plug service |
| Gearcase Seals | Gear lube drain and vent screw service |
Prefer to Buy the Kit with Oil & Gear Lube?
Mercury 40-60HP EFI 100 Hour Kit With 10W30 Oil & Gear Lube
Prefer a complete maintenance package? Order the Mercury 8M0232733-L 100 Hour Service Kit with Mercury 10W30 engine oil and gear lube included.
This is the convenient option for customers servicing compatible Mercury 40HP-60HP FourStroke EFI outboards and wanting the oil and gear lube packaged with the service kit.
View Complete KitOil Capacity & Recommended Oil Options
This Mercury 40-60HP FourStroke EFI engine uses approximately 4 quarts of engine oil, or 1 gallon.
| Oil Type | Product | Quantity Required |
|---|---|---|
| Mercury 10W30 | Mercury 10W30 Engine Oil - Quart | 4 quarts |
| Mercury 10W30 | Mercury 10W30 Engine Oil - Gallon | 1 gallon |
| Mercury 10W30 Synthetic Blend | Mercury 10W30 Synthetic Blend - Quart | 4 quarts |
| Mercury 10W30 Synthetic Blend | Mercury 10W30 Synthetic Blend - Gallon | 1 gallon |
| Mercury 10W30 Full Synthetic | Mercury 10W30 Full Synthetic - Gallon | 1 gallon |
| Mercury 25W40 | Mercury 25W40 Engine Oil - Quart | 4 quarts |
| Mercury 25W40 Synthetic Blend | Mercury 25W40 Synthetic Blend - Quart | 4 quarts |
| Mercury 25W40 Synthetic Blend | Mercury 25W40 Synthetic Blend - Gallon | 1 gallon |
Recommended Gear Lube
Gear Lube Quantity:
This application uses approximately 1 quart of gear lube.
| Gear Lube Type | Product |
|---|---|
| Mercury Premium Gear Lube 80W90 | Mercury Premium Gear Lube 80W90 - Quart |
| Mercury High Performance Gear Lube | Mercury High Performance Gear Lube - Quart |
Always verify the correct gear lube type and fill quantity in your Mercury owner's manual before servicing.
Complete Your Service
300 Hour Kit - BigFoot / Command Thrust
Mercury 300 hour service kit for compatible BigFoot and Command Thrust gearcase models. Oil and gear lube sold separately.
View Product
300 Hour Kit With Oil - BigFoot / Command Thrust
Mercury 300 hour service kit with oil and gear lube for compatible BigFoot and Command Thrust models.
View Product
300 Hour Kit - Standard Gearcase
Mercury 300 hour service kit for compatible standard gearcase models. Oil and gear lube sold separately.
View Product
300 Hour Kit With Oil - Standard Gearcase
Mercury 300 hour service kit with 10W30 oil and gear lube for compatible standard gearcase models.
View Product
Mercury Aluminum Anode Kit
Aluminum anode kit for compatible Mercury 40-60HP FourStroke EFI outboards. Helps protect against galvanic corrosion.
View ProductWhat This Service Kit is Used For
The Mercury 8M0232733 service kit is used for routine 100 hour maintenance on compatible Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards with serial numbers 1C000001 and higher.
Routine maintenance helps support fuel system cleanliness, oil filtration, gearcase service, and long-term outboard reliability.
Key Features and Benefits
- OEM Mercury 100 hour service kit
- Fits Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards
- For serial numbers 1C000001 and higher
- Includes oil filter, low-pressure fuel filter, and high-pressure fuel filter
- Includes oil drain seal and gearcase seals
- Oil and gear lube sold separately
- Engine uses approximately 4 quarts or 1 gallon of oil
- Gearcase uses approximately 1 quart of gear lube
- Pairs with 300 hour service kits and aluminum anode kit
Service Kit Details
- Part Number: 8M0232733
- Application: Mercury 40-60HP FourStroke EFI Outboards
- Serial Range: 1C000001 & Higher
- Service Interval: 100 Hour Maintenance
- Oil and Gear Lube: Sold Separately
- Engine Oil Capacity: Approximately 4 quarts / 1 gallon
- Gear Lube Capacity: Approximately 1 quart
- Included Components: Oil filter, low-pressure fuel filter, high-pressure fuel filter, oil drain seal, gearcase seals
FAQ
What engines does this service kit fit?
This kit fits Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards
with serial numbers 1C000001 and higher.
Does this kit include oil and gear lube?
Oil and gear lube are sold separately.
How much oil does this engine use?
This engine uses approximately 4 quarts, or 1 gallon, of engine oil.
How much gear lube is required?
This application uses approximately 1 quart of gear lube.
Is there a kit option with oil and gear lube included?
Yes. The Mercury 8M0232733-L kit includes 10W30 oil and gear lube
and is linked above.
Which 300 hour kit should I choose?
Choose the correct 300 hour kit based on your gearcase type:
BigFoot / Command Thrust or standard gearcase.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Opened oil and lubricants may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0232733, Mercury 40HP EFI service kit, Mercury 50HP EFI service kit, Mercury 60HP EFI service kit, Mercury 40-60HP FourStroke EFI service kit, Mercury 40-60HP 100 hour kit, Mercury 40HP 100 hour service, Mercury 50HP 100 hour service, Mercury 60HP 100 hour service, Mercury serial 1C000001 service kit, Mercury 1C000001 and higher maintenance kit, Mercury 40-60HP oil filter kit, Mercury fuel filter service kit, Mercury Premium Gear Lube 858058K01, Mercury High Performance Gear Lube, 8M0232733-L, 8M0090559, 8M0090559-L, 8M0113483, 8M0113483-L, 8M0107547, Mercury BigFoot 300 hour kit, Mercury Command Thrust 300 hour kit, Mercury standard gearcase 300 hour kit
8M0232733
OEM Mercury 100 Hour Service Kit
Mercury L6 Verado 200HP-300HP Serial 2B144122 & Below Maintenance Kit
This genuine OEM Mercury maintenance kit contains the routine service components needed for compatible Mercury L6 Verado 200HP-300HP FourStroke outboards.
Designed for scheduled 100 hour maintenance service on earlier Mercury L6 Verado models with serial numbers 2B144122 and below. This complete version includes Mercury SAE 10W30 engine oil and Mercury High Performance gear lube.
Compatible Applications
| Engine Platform | Horsepower Range | Serial Range | Application Notes |
|---|---|---|---|
| Mercury L6 Verado EFI FourStroke | 200HP-300HP | 2B144122 & Below | Earlier L6 Verado models |
Some customers prefer Mercury 25W40 or synthetic blend oil depending on operating conditions, climate, or personal maintenance preferences.
In that case, you can order the maintenance kit version without oil and gear lube, then choose the exact lubricants you prefer separately.
View Service Kit Without Oil & Gear Lube
What is Included
| Qty | Included Component | Application |
|---|---|---|
| 1 | OEM Mercury Oil Filter | Routine engine oil service |
| 1 | OEM Mercury Fuel Filter | Fuel system maintenance |
| 1 | Drain Seals & Service Components | Routine maintenance service |
| 2 | Mercury SAE 10W30 Engine Oil Gallons | Engine lubrication service |
| 2 | Mercury High Performance Gear Lube Quarts | Gearcase lubrication service |
What This Service Kit is Used For
This OEM Mercury service kit provides the routine maintenance components needed for scheduled 100 hour service on compatible earlier Mercury L6 Verado 200HP-300HP FourStroke outboards.
The included Mercury SAE 10W30 engine oil and High Performance gear lube help simplify routine maintenance by providing the lubricants required for complete engine and gearcase service.
Regular maintenance helps support fuel system cleanliness, proper engine lubrication, cooling system reliability, and long-term offshore performance.
Replacing filters, lubricants, and service components at recommended intervals helps reduce engine wear and maintain dependable operation.
Key Features and Benefits
- Genuine OEM Mercury 100 hour maintenance kit
- Fits Mercury L6 Verado 200HP-300HP outboards
- Designed for serial numbers 2B144122 and below
- Includes Mercury SAE 10W30 engine oil
- Includes Mercury High Performance gear lube
- Includes OEM Mercury maintenance components
- Designed for complete scheduled maintenance service
- Convenient all-in-one maintenance package
Service Kit Details
- Kit Part Number: 8M0097858-L
- Brand: Mercury Marine
- Application: Mercury L6 Verado EFI FourStroke
- Horsepower Range: 200HP-300HP
- Serial Range: 2B144122 & Below
- Service Interval: 100 Hour Maintenance
- Oil Included: Yes - Mercury SAE 10W30
- Gear Lube Included: Yes - Mercury High Performance Gear Lube
FAQ
What engines does this service kit fit?
This kit fits compatible Mercury L6 Verado EFI FourStroke 200HP-300HP outboards with serial numbers 2B144122 and below.
Does this kit include engine oil?
Yes. This kit includes Mercury SAE 10W30 engine oil.
Does this kit include gear lube?
Yes. Mercury High Performance Gear Lube is included.
What if I want Mercury 25W40 oil instead?
Customers wanting a different oil type can order the version of this service kit without lubricants and select their preferred Mercury oil separately.
Which kit fits serial number 2B144123 and newer?
Mercury L6 Verado models with serial number 2B144123 and newer use the newer 8M0120657 service kit series.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0097858-L, Mercury L6 Verado service kit, Mercury Verado 100 hour kit, Mercury 200HP Verado maintenance kit, Mercury 225HP Verado maintenance kit, Mercury 250HP Verado maintenance kit, Mercury 275HP Verado maintenance kit, Mercury 300HP Verado maintenance kit, Mercury Verado serial 2B144122 and below, Mercury 100 hour maintenance kit, Mercury Verado oil change kit, Mercury 10W30 oil kit, Mercury gear lube maintenance kit
Suzuki OEM 4-Stroke Service Kit with Fluids
Suzuki DF115B / DF140B-G 2020-Present OEM Service Kit with Oil & Gear Lube
This OEM Suzuki service kit is built for Suzuki DF115B and DF140B-G 2020-Present 4-stroke outboards. It includes the common OEM maintenance components used for routine service plus Suzuki ECSTAR 10W40 engine oil and Suzuki ECSTAR gear lube.
This kit includes the required fluid quantities for this engine family: 1 gallon and 2 quarts of engine oil, equal to 6 quarts total, plus 2 quarts of gear lube.
Compatible Applications
| Make | Model | Year Range |
|---|---|---|
| Suzuki | DF115B | 2020-Present |
| Suzuki | DF140B-G | 2020-Present |
Prefer the Kit Without Oil & Gear Lube?
Some customers buy different oil, already have fluids in stock, or need more or less oil for their service setup. If you want the OEM service parts without engine oil and gear lube, use the no-fluid kit below.
Suzuki DF115B / DF140B-G 2020-Present OEM Service Kit
OEM service kit option without engine oil or gear lube.
View Kit 99100-99L01Fluid Included
This kit includes engine oil: one Suzuki ECSTAR 10W40 gallon and two Suzuki ECSTAR 10W40 quarts. This equals 6 quarts total.
This kit also includes gear lube: two Suzuki ECSTAR gear lube quarts.
What is Included
| Qty | Part Number | Linked Description |
|---|---|---|
| 1 | 17400-92J21 | Water Pump Repair Kit OE Suzuki DF100 / DF115 / DF140 |
| 2 | 11265-87E10 | Gasket, Block Anode Suzuki |
| 1 | 5030465 | Gasket, Oil Pan Drain Johnson/Evinrude 25-225 4 Stroke Suzuki DF25-300 |
| 1 | 0573 | Cotter Pin, Prop Nut 5pk - OEM cotter pin supplied in this kit |
| 4 | LKR6E | Spark Plug NGK LKR6E |
| 3 | 09280-22019 | O-ring, Anode Cover Suzuki DF115-DF300 |
| 1 | 15412-1 | Element, Fuel Filter OEM Suzuki DF140 |
| 1 | 16510-96J10 | Oil Filter Suzuki DF175-DF350 |
| 2 | 798 | Gasket, Gearcase Drain Suzuki DF9.9-140HP |
| 5 | 55321-87J10P | Anode, Zinc Suzuki DF9-300 - OEM anodes supplied in this kit |
| 1 | SUZ-10W40-GAL | Engine Oil 10W40 ECSTAR 1 Gallon Suzuki 4 Stroke Semi Synthetic |
| 2 | SUZ-10W40-QT | Engine Oil 10W40 ECSTAR 1 Quart Suzuki 4 Stroke Semi Synthetic |
| 2 | SUZ-GLUBE-QT | Gear Lube Quart Suzuki ECSTAR 946ML 31.988 Oz |
Some customers prefer to customize their kit. Use the linked parts list above to reorder individual OEM service components, add extra fluids, or build a service package around the oil quantity you prefer to stock.
Maintenance Value
This kit packages the common OEM Suzuki DF115B and DF140B-G maintenance parts with the engine oil and gear lube needed for a full routine service. It is a convenient option for annual maintenance, 100-hour service planning, water pump service, oil and gearcase fluid changes, spark plug replacement, filter service, and anode replacement.
Key Features & Benefits
- OEM Suzuki service kit for DF115B and DF140B-G 2020-Present outboards.
- Includes 6 quarts total of Suzuki ECSTAR 10W40 engine oil: 1 gallon plus 2 quarts.
- Includes 2 quarts of Suzuki ECSTAR gear lube for lower unit service.
- Includes OEM water pump repair kit, filters, spark plugs, gaskets, O-rings, cotter pin, and anodes.
- Good choice when you want the major service parts and fluids packaged together.
- Linked component table makes individual part and fluid reordering easy.
Service Kit Details
| Kit Number | 99100-99L01-1 |
|---|---|
| Kit Type | OEM Suzuki service kit with engine oil and gear lube |
| Engine Oil Included | Yes - 1 gallon and 2 quarts of Suzuki ECSTAR 10W40, equal to 6 quarts total |
| Gear Lube Included | Yes - 2 quarts of Suzuki ECSTAR gear lube |
| Application | Suzuki DF115B, DF140B-G 2020-Present |
FAQ
Does this kit include engine oil?
Yes. This kit includes 1 gallon and 2 quarts of Suzuki ECSTAR 10W40 engine oil, for 6 quarts total.
Does this kit include gear lube?
Yes. This kit includes 2 quarts of Suzuki ECSTAR gear lube.
Is there a version without oil and gear lube?
Yes. Choose kit 99100-99L01 if you want the OEM service components without engine oil and gear lube.
Can I buy the fluids separately?
Yes. The fluids are available separately as Suzuki 10W40 gallon, Suzuki 10W40 quart, and Suzuki gear lube quart.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Suzuki DF115B service kit with oil, Suzuki DF140B-G service kit with gear lube, Suzuki 115 140 OEM service kit, Suzuki 10W40 oil kit, Suzuki gear lube service kit, Suzuki water pump service kit.
Searchable Part Numbers
99100-99L01-1, 99100-99L01, 17400-92J21, 11265-87E10, 5030465, 0573, LKR6E, 09280-22019, 15412-1, 15412-92J00, 16510-96J10, 798, 55321-87J10P, SUZ-10W40-GAL, SUZ-10W40-QT, SUZ-GLUBE-QT
99100-99L01
OEM Mercury 40-60HP EFI 100 Hour Service Kit With Oil
Mercury 40-60HP EFI 100 Hour Kit Serial 1C000001-Present
The Mercury 8M0232733-L 100 Hour Service Kit is a convenient maintenance package for Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards with serial numbers 1C000001 and higher.
This kit includes the routine 100 hour service components along with Mercury 10W30 engine oil and gear lube, making it a complete option for scheduled maintenance.
Compatible Applications
| Brand | Horsepower | Engine Type | Serial Range |
|---|---|---|---|
| Mercury | 40HP | FourStroke EFI Outboard | 1C000001 & Higher |
| Mercury | 50HP | FourStroke EFI Outboard | 1C000001 & Higher |
| Mercury | 60HP | FourStroke EFI Outboard | 1C000001 & Higher |
This Mercury 100 hour service kit fits Mercury 40-60HP FourStroke EFI outboards with serial numbers 1C000001 and higher.
Always verify your engine serial number before ordering maintenance parts.
What is Included
| Included Component | Application |
|---|---|
| Oil Filter | Engine oil filtration service |
| Low-Pressure Fuel Filter | Fuel system maintenance |
| High-Pressure Fuel Filter | Fuel system maintenance |
| Oil Drain Seal | Oil drain plug service |
| Gearcase Seals | Gear lube drain and vent screw service |
| Mercury 10W30 Engine Oil | Engine oil service |
| Mercury Gear Lube | Gearcase lubricant service |
Oil & Gear Lube Included
This kit includes Mercury 10W30 engine oil and gear lube for the 100 hour service.
Mercury 40-60HP FourStroke EFI engines use approximately 4 quarts of engine oil, or 1 gallon. The gearcase uses approximately 1 quart of gear lube.
Prefer to Choose a Different Oil?
Some customers prefer to choose a different Mercury oil type, such as Mercury 25W40, 10W30 Synthetic Blend, 25W40 Synthetic Blend, or 10W30 Full Synthetic.
If you want to select your own oil and gear lube separately, order the standard 100 hour service kit below.
Order 8M0232733 - Oil and Gear Lube Sold SeparatelyOptional Oil Choices
| Oil Type | Product | Quantity Required |
|---|---|---|
| Mercury 10W30 | Mercury 10W30 Engine Oil - Quart | 4 quarts |
| Mercury 10W30 | Mercury 10W30 Engine Oil - Gallon | 1 gallon |
| Mercury 10W30 Synthetic Blend | Mercury 10W30 Synthetic Blend - Quart | 4 quarts |
| Mercury 10W30 Synthetic Blend | Mercury 10W30 Synthetic Blend - Gallon | 1 gallon |
| Mercury 10W30 Full Synthetic | Mercury 10W30 Full Synthetic - Gallon | 1 gallon |
| Mercury 25W40 | Mercury 25W40 Engine Oil - Quart | 4 quarts |
| Mercury 25W40 Synthetic Blend | Mercury 25W40 Synthetic Blend - Quart | 4 quarts |
| Mercury 25W40 Synthetic Blend | Mercury 25W40 Synthetic Blend - Gallon | 1 gallon |
Complete Your Service
300 Hour Kit - BigFoot / Command Thrust
Mercury 300 hour service kit for compatible BigFoot and Command Thrust gearcase models. Oil and gear lube sold separately.
View Product
300 Hour Kit With Oil - BigFoot / Command Thrust
Mercury 300 hour service kit with oil and gear lube for compatible BigFoot and Command Thrust models.
View Product
300 Hour Kit - Standard Gearcase
Mercury 300 hour service kit for compatible standard gearcase models. Oil and gear lube sold separately.
View Product
300 Hour Kit With Oil - Standard Gearcase
Mercury 300 hour service kit with 10W30 oil and gear lube for compatible standard gearcase models.
View Product
Mercury Aluminum Anode Kit
Aluminum anode kit for compatible Mercury 40-60HP FourStroke EFI outboards. Helps protect against galvanic corrosion.
View ProductWhat This Service Kit is Used For
The Mercury 8M0232733-L service kit is used for routine 100 hour maintenance on compatible Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards with serial numbers 1C000001 and higher.
Routine maintenance helps support fuel system cleanliness, oil filtration, gearcase service, and long-term outboard reliability.
Key Features and Benefits
- OEM Mercury 100 hour service kit
- Fits Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards
- For serial numbers 1C000001 and higher
- Includes Mercury 10W30 engine oil
- Includes gear lube for gearcase service
- Includes oil filter, low-pressure fuel filter, and high-pressure fuel filter
- Includes oil drain seal and gearcase seals
- Standard 8M0232733 kit available for customers who prefer other oils
- Pairs with 300 hour service kits and aluminum anode kit
Service Kit Details
- Part Number: 8M0232733-L
- Base Kit: 8M0232733
- Application: Mercury 40-60HP FourStroke EFI Outboards
- Serial Range: 1C000001 & Higher
- Service Interval: 100 Hour Maintenance
- Oil Included: Mercury 10W30 Engine Oil
- Gear Lube Included: Yes
- Engine Oil Capacity: Approximately 4 quarts / 1 gallon
- Gear Lube Capacity: Approximately 1 quart
FAQ
What engines does this service kit fit?
This kit fits Mercury 40HP, 50HP, and 60HP FourStroke EFI outboards
with serial numbers 1C000001 and higher.
Does this kit include oil and gear lube?
Yes. This kit includes Mercury 10W30 engine oil and gear lube.
What if I prefer a different oil?
Some customers prefer to choose their own oil. In that case, order the
standard 8M0232733 kit and select your preferred Mercury oil separately.
How much oil does this engine use?
This engine uses approximately 4 quarts, or 1 gallon, of engine oil.
How much gear lube is required?
This application uses approximately 1 quart of gear lube.
Which 300 hour kit should I choose?
Choose the correct 300 hour kit based on your gearcase type:
BigFoot / Command Thrust or standard gearcase.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Opened oil and lubricants may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0232733-L, 8M0232733, Mercury 40HP EFI service kit with oil, Mercury 50HP EFI service kit with oil, Mercury 60HP EFI service kit with oil, Mercury 40-60HP FourStroke EFI service kit, Mercury 40-60HP 100 hour kit with 10W30, Mercury 40HP 100 hour service kit, Mercury 50HP 100 hour service kit, Mercury 60HP 100 hour service kit, Mercury serial 1C000001 service kit, Mercury 1C000001 and higher maintenance kit, Mercury 40-60HP oil filter kit, Mercury fuel filter service kit, Mercury 10W30 oil service kit, Mercury gear lube service kit, 8M0090559, 8M0090559-L, 8M0113483, 8M0113483-L, 8M0107547, Mercury BigFoot 300 hour kit, Mercury Command Thrust 300 hour kit, Mercury standard gearcase 300 hour kit
8M0232733
Quicksilver 10W30 Oil Change Kit
Mercury & Mariner 150HP FourStroke Oil Change Kit
This Quicksilver oil change kit contains the routine maintenance components needed to service compatible Mercury and Mariner 150HP FourStroke outboards.
The kit includes six liters of Quicksilver SAE 10W30 4-stroke marine engine oil, premium oil filter, oil drain hose, and service instructions to help simplify routine engine oil maintenance.
Compatible Applications
| Brand | Horsepower | Engine Type | Application Notes |
|---|---|---|---|
| Mercury | 150HP | FourStroke | Select compatible models |
| Mariner | 150HP | FourStroke | Select compatible models |
What is Included
| Qty | Included Part | Part Number |
|---|---|---|
| 1 | Premium Oil Filter | Included |
| 6 | Quicksilver SAE 10W30 4-Stroke Marine Engine Oil | Included |
| 1 | Oil Drain Hose | Included |
| 1 | Oil Change Instructions | Included |
We also stock the OEM Mercury 10W30 Synthetic Blend oil change kit for Mercury and Mariner 150HP FourStroke outboards.
View Mercury 10W30 Synthetic Blend Oil Change Kit
What This Kit is Used For
This Quicksilver oil change kit provides the routine maintenance parts needed to perform an engine oil and oil filter service on compatible Mercury and Mariner 150HP FourStroke outboards.
Quicksilver marine engine oil is formulated specifically for marine applications and includes corrosion protection additives designed to help protect internal engine components during operation and storage.
The oil formulation is designed to maintain lubricity and viscosity retention during high-temperature operation and demanding RPM ranges common in marine environments.
Some customers prefer OEM Mercury maintenance kits while others prefer Quicksilver service kits depending on maintenance preferences and budget.
Key Features and Benefits
- Quicksilver oil change kit for Mercury and Mariner 150HP FourStroke outboards
- Includes six liters of SAE 10W30 4-stroke marine engine oil
- Includes premium oil filter
- Includes oil drain hose and service instructions
- Designed for routine oil and filter maintenance
- Marine-specific additive package with corrosion protection
- Supports proper lubrication during high-temperature operation
- Convenient all-in-one maintenance kit
Oil Kit Details
- Kit Part Number: 8M0107513
- Engine Compatibility: Mercury & Mariner 150HP FourStroke
- Oil Type: Quicksilver SAE 10W30 4-Stroke Marine Engine Oil
- Oil Quantity: 6 Liters
- Included Components: Oil filter, engine oil, oil drain hose, and instructions
- Service Type: Routine engine oil and oil filter maintenance
FAQ
What engines does this oil change kit fit?
This kit fits compatible Mercury and Mariner 150HP FourStroke outboards.
Is this the synthetic blend version?
No. This Quicksilver oil change kit includes standard SAE 10W30 marine engine oil. If you prefer the Mercury synthetic blend version, see the linked OEM Mercury kit above.
How much oil is included in this kit?
This kit includes six liters of Quicksilver SAE 10W30 4-stroke marine engine oil.
Does this kit include a drain hose?
Yes. This kit includes an oil drain hose to help make routine oil service cleaner and easier.
Can I perform this oil change service myself?
Yes. Many boat owners perform routine oil and filter maintenance themselves using basic hand tools and the proper service parts. Always follow your engine manufacturer’s service procedures and verify proper oil capacity before operation.
If you do not feel comfortable performing maintenance yourself, a Mercury-certified marine technician can typically complete this service quickly and help verify your engine is operating properly.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0107513, Mercury 150HP oil change kit, Mariner 150HP oil change kit, Quicksilver 10W30 oil kit, Mercury FourStroke oil kit, Mercury 10W30 maintenance kit, Mercury oil drain hose kit
8M0107513
8M0188357
OEM Mercury 300 Hour Service Kit With Oil
Mercury 5.7L V10 350HP-425HP Verado 300 Hour Maintenance Kit
This OEM Mercury 300 hour service kit with oil is designed for Mercury 5.7L V10 350HP-425HP Verado outboards equipped with the 6.44 gearcase. It includes the major scheduled maintenance components along with Mercury 25W50 engine oil for complete engine oil service.
Important: This kit includes engine oil, but it does not include gear lube. Mercury V10 standard rotation and counter rotation gearcases require different gear lube quantities, so gear lube should be selected separately below.
Compatible Applications
| Engine Platform | Horsepower Range | Displacement | Application Notes |
|---|---|---|---|
| Mercury Verado V10 | 350HP-425HP | 5.7L FourStroke | Models equipped with the Mercury 6.44 gearcase only |
This service kit is specifically for Mercury 5.7L V10 Verado models equipped with the 6.44 gearcase.
This kit includes Mercury 25W50 engine oil, but it does not include gear lube.
Standard rotation Mercury V10 gearcases use approximately 1 quart of gear lube.
Counter rotation Mercury V10 gearcases use approximately 2.3 quarts, so customers should order 3 quarts for proper service.
If you do not want the version with included Mercury 25W50 engine oil, use the no-oil version and select your oil separately.
View Mercury V10 300 Hour Service Kit Without Oil
What is Included
| Included Component | Application |
|---|---|
| OEM Mercury 300 hour maintenance components | Scheduled Mercury V10 service interval |
| OEM Mercury oil filter | Engine oil filtration service |
| OEM Mercury fuel filter components | Fuel system maintenance |
| OEM Mercury spark plugs | Ignition system maintenance |
| OEM Mercury thermostat and cooling system components | Cooling system maintenance |
| OEM Mercury water pump repair components | Water pump service |
| OEM Mercury seals and maintenance hardware | Routine scheduled maintenance replacement items |
| Mercury 25W50 engine oil | Engine lubrication service |
Gear Lube Options - Sold Separately
| Gear Lube | Product | Quantity Required |
|---|---|---|
| Premium 80W90 Gear Lube | Mercury Premium 80W90 Gear Lube | Standard rotation: 1 quart Counter rotation: 3 quarts |
| Extreme Performance 85W90 Gear Lube | Mercury Extreme Performance Gear Lube | Standard rotation: 1 quart Counter rotation: 3 quarts |
Complete Your Service
300 Hour Service Kit Without Oil
OEM Mercury 300 hour maintenance kit without engine oil or gear lube for Mercury 5.7L V10 350HP-425HP Verado outboards with the 6.44 gearcase.
View Product
Mercury V10 Anode Kit
OEM Mercury anode kit for Mercury 5.7L V10 350HP-425HP Verado outboards. Helps protect against galvanic corrosion in freshwater and saltwater use.
View ProductWhat This Service Kit is Used For
This OEM Mercury 300 hour service kit with oil is used for major scheduled maintenance on compatible Mercury 5.7L V10 Verado 350HP-425HP outboards equipped with the 6.44 gearcase.
The included Mercury 25W50 engine oil helps simplify scheduled maintenance while the OEM Mercury service components support proper cooling system, fuel system, ignition, and water pump service.
Because standard rotation and counter rotation gearcases use different amounts of gear lube, this kit does not include gear lube. Customers should choose the proper lubricant and quantity separately.
Customers performing 300 hour service should also inspect anodes, lower unit lubricant condition, and additional wear items depending on operating conditions and service history.
Key Features and Benefits
- OEM Mercury 300 hour maintenance kit with engine oil
- Fits Mercury 5.7L V10 350HP-425HP Verado models with the 6.44 gearcase
- Includes Mercury 25W50 engine oil
- Designed for scheduled 300 hour service
- Does not include gear lube
- Allows customers to select the proper gear lube quantity separately
- Includes major cooling system and water pump service components
- Supports long-term engine reliability and performance
Service Kit Details
- Kit Part Number: 8M0207808-L
- Brand: Mercury Marine
- Application: Mercury 5.7L V10 Verado Outboards
- Horsepower Range: 350HP-425HP
- Gearcase Requirement: Mercury 6.44 Gearcase Only
- Service Interval: 300 Hour Maintenance
- Engine Oil Included: Yes - Mercury 25W50
- Gear Lube Included: No
- Standard Rotation Gear Lube Required: Approximately 1 quart
- Counter Rotation Gear Lube Required: Approximately 2.3 quarts - order 3 quarts
FAQ
What engines does this 300 hour service kit fit?
This kit fits Mercury 5.7L V10 Verado 350HP-425HP outboards equipped with the 6.44 gearcase.
Does this kit include engine oil?
Yes. This version includes Mercury 25W50 engine oil.
Does this kit include gear lube?
No. Gear lube is not included because standard rotation and counter rotation gearcases use different amounts.
How much gear lube should I order?
Standard rotation gearcases use approximately 1 quart. Counter rotation gearcases use approximately 2.3 quarts, so order 3 quarts for counter rotation service.
Why is the 6.44 gearcase important?
Mercury used different gearcase configurations on V10 Verado models, so this kit is specifically intended for engines equipped with the 6.44 gearcase.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits and lubricants must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0207808-L, Mercury V10 300 hour service kit with oil, Mercury 5.7L V10 service kit, Mercury Verado V10 maintenance kit, Mercury 350HP service kit, Mercury 400HP service kit, Mercury 425HP service kit, Mercury 6.44 gearcase service kit, Mercury V10 kit with oil, Mercury 25W50 oil, Mercury V10 gear lube not included, Mercury Premium 80W90 gear lube, Mercury Extreme Performance gear lube, Mercury V10 anode kit, Mercury Verado maintenance parts
OEM Mercury 300-Hour Verado Service Kit with Oil & Gear Lube
Mercury 8M0149932-L Service Kit for 4.6L V8 Verado & Verado SeaPro Outboards
The Mercury 8M0149932-L 300-Hour Service Kit is designed for Mercury 4.6L V8 Verado and Verado SeaPro outboards using the AMS (Advanced MidSection).
This complete OEM Mercury maintenance package includes the major 300-hour service components along with Mercury 10W30 engine oil and Mercury gear lube.
Compatible Applications
| Engine Family | Engine Size | Midsection | Application Notes |
|---|---|---|---|
| Mercury Verado | 4.6L V8 FourStroke | AMS / Advanced MidSection | Fits compatible Mercury Verado AMS outboards |
| Mercury Verado SeaPro | 4.6L V8 FourStroke | AMS / Advanced MidSection | Fits compatible Mercury Verado SeaPro AMS outboards |
AMS stands for Advanced MidSection. Always verify your exact engine model and serial number before ordering.
What is Included
- OEM Mercury oil filter
- OEM Mercury fuel filter
- Oil drain seal
- Spark plugs
- Thermostat
- Alternator belt
- Anodes
- Water pump repair kit
- Mercury 10W30 engine oil
- Mercury gear lube
OEM Part Numbers & Cross References
| Brand / Type | Part Number |
|---|---|
| Mercury OEM | 8M0149932-L |
| Related Kit Without Oil | 8M0149932 |
| Application | 300-Hour Verado AMS Service Kit with Oil & Gear Lube |
Prefer a Different Oil Weight?
This version includes Mercury 10W30 engine oil and Mercury gear lube.
Some customers prefer ordering their service kit without oil so they can choose a different Mercury oil weight or oil type.
If you would rather choose your own oil separately, see:
Mercury 8M0149932 300-Hour Verado AMS Service Kit Without Oil
Related AMS Anode Kit
Mercury Verado AMS and Verado SeaPro AMS outboards use a different anode configuration than CMS models.
For replacement AMS aluminum anodes, see:
Mercury 8M0205955 Aluminum Anode Kit
What This Service Kit is Used For
This Mercury 300-hour maintenance kit is designed for scheduled service on compatible Mercury Verado and Verado SeaPro AMS outboards.
Regular maintenance helps support long-term reliability, proper cooling, fuel system performance, and corrosion protection.
Mercury packages the required 300-hour service components together to simplify maintenance and reduce the need to source parts individually.
Key Features and Benefits
- Genuine OEM Mercury 300-hour maintenance kit
- Fits Mercury 4.6L V8 Verado and Verado SeaPro AMS outboards
- Includes oil filter, fuel filter, and oil drain seal
- Includes spark plugs, thermostat, alternator belt, and water pump repair kit
- Includes AMS anodes
- Includes Mercury 10W30 engine oil and gear lube
- Convenient all-in-one maintenance package
- Produced to Mercury OEM specifications
Service Kit Details
- Brand: Mercury / Quicksilver
- Part Number: 8M0149932-L
- Part Type: 300-Hour Service Kit with Oil & Gear Lube
- Application: Mercury 4.6L V8 Verado & Verado SeaPro AMS Outboards
- Midsection: AMS / Advanced MidSection
- Includes Oil: Yes
- Includes Gear Lube: Yes
- Quantity Sold: Kit
FAQ
What engines does Mercury 8M0149932-L fit?
This kit fits Mercury 4.6L V8 Verado and Verado SeaPro AMS outboards.
Does this kit include engine oil?
Yes. This version includes Mercury 10W30 engine oil.
Does this kit include gear lube?
Yes. Mercury gear lube is included.
What parts are included in this 300-hour service kit?
The kit includes an oil filter, fuel filter, oil drain seal,
spark plugs, thermostat, alternator belt, water pump repair kit,
AMS anodes, engine oil, and gear lube.
What is AMS?
AMS stands for Advanced MidSection and is used on Mercury Verado
and certain Mercury Racing applications.
Which anode kit goes with this engine?
This AMS application uses Mercury aluminum anode kit 8M0205955.
Is there a version without oil?
Yes. Mercury 8M0149932 includes the same 300-hour maintenance parts
without engine oil and gear lube.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Service kits should be verified for correct fitment before installation.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0149932-L, Mercury Verado 300 hour service kit, Mercury AMS service kit, Mercury Verado SeaPro service kit, Mercury 4.6L V8 maintenance kit, Mercury Verado maintenance kit, Mercury AMS maintenance kit, Mercury spark plug service kit, Mercury thermostat service kit, Mercury water pump repair kit, Mercury alternator belt kit, Mercury anode service kit, Mercury 10W30 oil kit, Mercury gear lube kit, 8M0149932, 8M0205955