S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Outboard Motor Parts | Mercury, Yamaha, Suzuki & More
Shop outboard motor parts for maintenance, repair, troubleshooting, and full marine engine rebuild projects. This category includes OEM parts and quality OEM specification aftermarket products from Pro Marine, along with replacement marine parts for Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard engines.
Use this section to browse outboard parts by brand and engine system, including cooling, fuel delivery, ignition and electrical, intake, internal engine components, lower unit parts, steering, trim, transom, midsection, engine oil, service kits, gaskets, seals, carburetor parts, water pump parts, and rebuild components.
Shop Outboard Categories
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair
Honda Outboard Honda cooling, fuel, electrical, and engine parts
Johnson / Evinrude / E-tec Outboard OMC, Johnson, Evinrude, and E-tec parts
Mercury Outboard Mercury and Mariner service and rebuild parts
Suzuki Outboard Suzuki maintenance, lower unit, and engine parts
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts
Yamaha Outboard Yamaha service, repair, and rebuild parts Common Outboard Parts Found in This Category
- Water pump kits, impellers, thermostats, and cooling system parts
- Carburetor kits, fuel pumps, fuel filters, and fuel system components
- Ignition coils, stators, switch boxes, rectifiers, sensors, and electrical parts
- Pistons, piston rings, bearings, crankshafts, sleeves, gaskets, and rebuild parts
- Lower unit seals, bearings, gears, driveshaft parts, and gearcase components
- Steering parts, control cables, trim parts, and transom components
- Engine oil, gear lube, service kits, spark plugs, seal kits, and routine maintenance parts
Common Outboard Problems and Where to Start
- Overheating: inspect the water pump, impeller, thermostat, cooling passages, and engine anodes.
- Hard starting or rough idle: check carburetor parts, fuel delivery, ignition components, spark plugs, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes, sensors, wiring, and related electrical components.
- Low compression or poor power: inspect pistons, rings, gaskets, cylinder condition, bearings, and internal engine components.
- Milky gear lube or gearcase noise: check lower unit seals, bearings, gears, driveshaft parts, and prop shaft components.
Frequently Asked Questions
What is the difference between OEM and aftermarket outboard parts?
OEM parts are made by the original engine manufacturer. Aftermarket parts are replacement parts made by other manufacturers to fit the same application. Pro Marine provides quality OEM specification aftermarket products designed for marine maintenance, repair, and rebuild work.
How do I find parts for my outboard engine?
Start by selecting your outboard brand, then choose the correct engine system category. Use your model number, serial number, horsepower, and year range to confirm fitment before ordering parts.
What information do I need before ordering outboard parts?
You should have the engine manufacturer, horsepower, model number, serial number, and any OEM part numbers from the original component when available. This helps avoid ordering parts that look similar but fit a different engine family.
Are aftermarket outboard parts reliable?
Yes, quality aftermarket outboard parts are commonly used by marine mechanics and rebuilders. Pro Marine offers OEM specification aftermarket products for many common outboard repair, maintenance, and rebuild applications.
What brands are included in the outboard category?
This category includes Chrysler Force, Honda, Johnson Evinrude E-tec, Mercury, Suzuki, Tohatsu Nissan, and Yamaha outboard parts.
Tip: Before ordering outboard parts, confirm your engine brand, horsepower, model number, serial number, and year range whenever possible.
0777994
175267
175267
18-3716
22340
777994
802002
802002Q1
9-73952
0777610
323361
777610
290230370
293300018
420230370
Sierra 25W40 Oil Change Kit
Mercury 1.7L 75HP, 90HP & 115HP EFI FourStroke Oil Change Kit
This Sierra oil change kit contains the routine maintenance components needed to service compatible Mercury 1.7L 75HP, 90HP, and 115HP EFI FourStroke outboards.
The kit includes Sierra 25W40 4-stroke marine engine oil, oil filter, drain plug seal, and service components to help simplify routine oil maintenance.
Compatible Applications
| Brand | Horsepower | Engine Type | Serial Range |
|---|---|---|---|
| Mercury | 75HP | 1.7L EFI FourStroke | 1B366823-2B094995 |
| Mercury | 90HP | 1.7L EFI FourStroke | 1B366823-2B094995 |
| Mercury | 115HP | 1.7L EFI FourStroke | 1B366823-2B094995 |
What is Included
| Qty | Included Part | Part Number |
|---|---|---|
| 1 | Sierra Marine Oil Filter | Included |
| 5 | Sierra 25W40 4-Stroke Marine Engine Oil | Included |
| 1 | Drain Plug Seal | Included |
We also stock the OEM Mercury version of this oil change kit for Mercury 1.7L 75-115HP EFI FourStroke outboards.
View OEM Mercury 8M0081917 Oil Change Kit
What This Kit is Used For
This Sierra oil change kit provides the routine maintenance parts needed to perform an engine oil and oil filter service on compatible Mercury 1.7L EFI FourStroke outboards.
Sierra marine engine oil is formulated for marine applications to help provide engine protection, lubrication stability, and corrosion resistance during operation and storage.
Routine oil and filter maintenance helps support proper engine performance, reduce wear, and extend engine life in demanding marine environments.
Some customers prefer OEM Mercury maintenance parts while others prefer Sierra aftermarket service kits. Both options are available depending on your maintenance preferences and budget.
Key Features and Benefits
- Sierra oil change kit for Mercury 1.7L EFI FourStroke outboards
- Fits Mercury 75HP, 90HP, and 115HP applications
- Fits serial range 1B366823-2B094995
- Includes Sierra 25W40 4-stroke marine engine oil
- Includes oil filter and drain plug seal
- Designed for routine oil and filter maintenance
- Helps support proper lubrication and engine protection
- Convenient all-in-one service kit
Oil Kit Details
- Kit Part Number: 18-9229
- Engine Compatibility: Mercury 1.7L 75HP, 90HP & 115HP EFI FourStroke
- Serial Range: 1B366823-2B094995
- Oil Type: Sierra SAE 25W40 4-Stroke Marine Engine Oil
- Oil Quantity: 5 Liters
- Included Components: Oil filter, engine oil, and drain plug seal
- Service Type: Routine engine oil and oil filter maintenance
FAQ
What engines does this oil change kit fit?
This kit fits Mercury 1.7L 75HP, 90HP, and 115HP EFI FourStroke
outboards within serial range 1B366823-2B094995.
What is the difference between the Sierra and OEM Mercury kit?
The Sierra kit is an aftermarket maintenance option that includes the
required oil service components for compatible Mercury outboards, while
the OEM Mercury kit contains genuine Mercury-branded service components.
How much oil is included in this kit?
This kit includes five liters of Sierra SAE 25W40 4-stroke marine engine oil.
Can I perform this oil change service myself?
Yes. Many boat owners perform routine oil and filter maintenance themselves using basic hand tools and the proper service parts. Always follow your engine manufacturer’s service procedures and verify proper oil capacity before operation.
If you do not feel comfortable performing maintenance yourself, a Mercury-certified marine technician can typically complete this service quickly and help verify your engine is operating properly.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
18-9229, Sierra oil change kit, Mercury 75HP oil change kit, Mercury 90HP oil change kit, Mercury 115HP oil change kit, Mercury 1.7L EFI FourStroke oil kit, Sierra 25W40 marine oil kit, Mercury serial 1B366823-2B094995 oil kit
8M0081917
0323466
0778170
314996
323466
445-126
778170
0387247
0769830
11410
18-1158
30956
30956T
387247
769830
Fits Yamaha F30, F40, F50, F60 & F70 Outboards (Selected 4-Stroke Models)
Compatible with Yamaha F30, F40, F50, F60, and F70 4-stroke outboard engines. This OEM Yamaha oil change kit is designed for routine engine oil service and includes the essential components required for an oil and filter change using 20W-40 engine oil. This kit does not include gear lube or water pump (impeller) components.
OEM & Cross Reference Information
- Pro Marine Item Number: MRNSM-KT-20
- Cross Reference #:Â LUB-MRNSM-KT-20, LUBMRNSMKT20
Compatibility
| Engine Model | Engine Type | Oil Weight | Notes |
|---|---|---|---|
| Yamaha F30 | 4-Stroke | 20W-40 | Oil Change Kit |
| Yamaha F40 | 4-Stroke | 20W-40 | Oil Change Kit |
| Yamaha F50 | 4-Stroke | 20W-40 | Oil Change Kit |
| Yamaha F60 | 4-Stroke | 20W-40 | Oil Change Kit |
| Yamaha F70 | 4-Stroke | 20W-40 | Oil Change Kit |
Verify engine model and oil specification before ordering.
What is Included
This OEM Yamaha oil change kit includes the required components for routine engine oil service:
- Yamaha 20W-40 4-stroke engine oil (correct quantity for listed models)
- OEM Yamaha oil filter element
- Drain plug gasket / seal
Note: This kit is intended for engine oil service only. Gear lube, fuel filters, spark plugs, and water pump components are not included.
What This Kit Is Used For
This Yamaha oil change kit supports routine engine oil service at recommended maintenance intervals. Regular oil and filter changes help maintain proper lubrication, reduce internal engine wear, and support long-term engine reliability.
Frequently Asked Questions
What engines does this kit fit?
This kit fits Yamaha F30, F40, F50, F60, and F70 4-stroke outboard engines requiring 20W-40 engine oil.
Does this kit include gear lube?
No. This kit is for engine oil service only and does not include lower unit gear lube.
Does this kit include water pump or impeller parts?
No. Water pump and impeller components are not included.
Is this OEM?
Yes. This kit contains OEM Yamaha components.
Build Your Own Kit
Some customers prefer to customize their maintenance kit. If you would like to add gear lube or other service items, use the parts list below to build your own kit.
Notes
- Always follow Yamaha’s service manual recommendations for oil type and service intervals.
- Verify engine compatibility before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Installed items and OEM electrical parts are not eligible for return.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Oil, lubricants, and fluids carry a $10 shipping charge.
LUBMRNSMKT20
Mercury L6 Verado 100 Hour Service Kit
Mercury Inline 6 Verado 200HP-300HP 100 Hour Kit With Oil & Gear Lube
This VER100-L6 service kit is built for Mercury Inline 6 Verado 200HP-300HP outboards with serial numbers 2B144122 and below. It includes Mercury 25W50 engine oil, Mercury High Performance gear lube, and the routine maintenance components commonly used for 100 hour service.
This is a convenient complete-service option for earlier Mercury L6 Verado models that use approximately 7.4 quarts of engine oil and 2 quarts of gear lube.
Compatible Applications
| Brand | Horsepower Range | Engine Family | Serial Range |
|---|---|---|---|
| Mercury | 200HP-300HP | Inline 6 Verado FourStroke | 2B144122 & Below |
This service kit is specifically for Mercury Inline 6 Verado 200HP-300HP models with serial numbers 2B144122 and below.
If your engine serial number is 2B144123 and newer, use the later L6 Verado service kit option designed for newer serial ranges.
This VER100-L6 service kit is only for Mercury Inline 6 Verado 200HP-300HP models.
If you have a 350HP-400HP L6 Verado, use the service kit below.
This kit includes Mercury 25W50 engine oil and Mercury High Performance gear lube for the listed service quantities.
Engine oil capacity is approximately 7.4 quarts, so this service uses 8 quarts or 2 gallons of Mercury 25W50 engine oil. Gearcase service uses 2 quarts of Mercury High Performance gear lube.
What is Included
| Qty | Included Component | Application |
|---|---|---|
| 2 | Mercury 25W50 Verado / Racing Oil - 1 Gallon | Engine oil service |
| 2 | Mercury High Performance Gear Lube - 1 Quart | Gearcase lubricant service |
| 6 | NGK ILFR6GE Iridium Spark Plugs | Ignition system maintenance |
| 1 | Oil Filter | Engine oil filtration service |
| 1 | Fuel Filter Components | Fuel system maintenance |
| 1 | Fuel Filter Cartridge Insert | Fuel system maintenance |
| 1 | Thermostat | Cooling system maintenance |
| 1 | Water Pump / Impeller Service Components | Cooling system and water pump maintenance |
| 1 | Anode Kit | Corrosion protection maintenance |
| 1 | Drain Plug Gasket / Service Seals | Routine service sealing components |
| 1 | Serpentine Belt | Accessory drive maintenance |
Oil and Gear Lube Links
-
Engine Oil Required:
Approximately 7.4 quarts total.
Mercury 25W50 Verado / Racing Oil - 1 Gallon | Mercury 25W50 4-Stroke Marine Oil - 1 Quart -
Gear Lube Required:
2 quarts.
Mercury High Performance Gear Lube - 1 Quart
Complete Your Service
Recommended Verado Anode Kits
What This Service Kit is Used For
This VER100-L6 service kit is used for routine 100 hour maintenance on compatible Mercury Inline 6 Verado 200HP-300HP outboards with serial numbers 2B144122 and below.
It supports key maintenance areas including engine oil service, gearcase lubrication, fuel filtration, ignition service, water pump service, cooling system maintenance, and corrosion protection service.
Regular 100 hour service helps support engine lubrication, cooling system performance, fuel system cleanliness, corrosion protection, and reliable Verado operation.
Key Features and Benefits
- 100 hour service kit for Mercury Inline 6 Verado outboards
- Fits Mercury 200HP-300HP L6 Verado models
- For serial numbers 2B144122 and below
- Includes Mercury 25W50 engine oil
- Includes Mercury High Performance gear lube
- Includes spark plugs, filters, thermostat, water pump components, and anodes
- Designed for routine annual or 100 hour maintenance
- Convenient all-in-one Verado maintenance solution
Service Kit Details
- Kit Part Number: VER100-L6
- Application: Mercury Inline 6 Verado FourStroke Outboards
- Horsepower Range: 200HP-300HP
- Serial Range: 2B144122 & Below
- Service Interval: 100 Hour Maintenance
- Engine Oil Included: Yes - Mercury 25W50
- Gear Lube Included: Yes - Mercury High Performance Gear Lube
- Engine Oil Quantity: Approximately 7.4 quarts
- Gear Lube Quantity: 2 quarts
FAQ
What engines does this VER100-L6 service kit fit?
This kit fits Mercury Inline 6 Verado 200HP-300HP outboards with serial numbers 2B144122 and below.
Does this kit include engine oil?
Yes. This kit includes Mercury 25W50 engine oil.
Does this kit include gear lube?
Yes. This kit includes 2 quarts of Mercury High Performance gear lube.
Does this fit Mercury L6 Verado 350HP-400HP models?
No. Higher horsepower 350HP-400HP L6 Verado models use different service kits and anode kits.
Is there a 100 hour kit without oil and gear lube?
Yes. The Mercury 8M0097858 kit is linked above for customers who want the service kit without oil and gear lube.
Can I buy only the oil change kit?
Yes. The Mercury L6 Verado oil change kit is linked above in the Complete Your Service section.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Opened oil, lubricants, installed parts, and used maintenance items may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
VER100-L6, Mercury L6 Verado service kit, Mercury Inline 6 Verado service kit, Mercury Verado 100 hour kit, Mercury L6 Verado 200HP service kit, Mercury L6 Verado 225HP service kit, Mercury L6 Verado 250HP service kit, Mercury L6 Verado 300HP service kit, Mercury Verado 2B144122 and below, Mercury 25W50 Verado oil, Mercury High Performance gear lube, HPLUBEQT, 858084, 8M0078013, OCKIT-1, 8M0097858, 8M0097858-L, VER6, 20817, Mercury L6 Verado anode kit, Mercury Verado maintenance kit
0331922
0334516
0336561
0336562
0337772
0337774
0434026
0435020
0437297
0777491
0777492
0777494
0777505
0777506
0910198
0910211
0910994
0910995
0987010
336561
337774
434026
435020
437297
5004216
5004938
777491
777492
777494
777505
777506
7990004
802525
802526
802532
802536
802536T
878652A1
910994
987010