S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
MPI Type B Marine Fuel Hose
MPI 3/8" Marine Fuel Hose - Type B - Sold by the Foot
The MPI 375 3/8" Fuel Hose is bulk marine fuel line designed for applications using 3/8" inside-diameter hose. It is sold by the foot so you can purchase the continuous length needed for your boat or outboard fuel-system installation.
This is the Type B version, commonly used in exposed and above-deck marine fuel-line applications where Type B hose is appropriate.
Pro Marine also stocks the matching Oetiker 4-185 ear clamp, Pro Marine 8005 3/8" primer bulb, Oetiker installation tools and a 3/8" Type A alternative.
Inside Diameter: 3/8"
Manufacturer: MPI Products
Fuel Hose Type: Type B Marine Fuel Hose
Sold: By the Foot
Recommended Clamp: Oetiker 4-185
Recommended Primer Bulb: Pro Marine 8005 - 3/8"
How to Order Bulk Fuel Hose
This hose is sold by the foot. Enter the quantity based on the total continuous length required for your installation.
For example, if you need 8 feet of fuel hose, order a quantity of 8.
Type B Marine Fuel Hose
Type B marine fuel hose is commonly used in exposed or above-deck fuel-system applications where that hose classification is appropriate.
Type B hose does not carry the same additional fire-test classification associated with Type A marine fuel hose. If the installation requires Type A hose, use the 3/8" Type A option linked below.
For installations requiring the additional Type A fire-resistant classification, use the 3/8" Type A marine fuel hose.
View 3/8" Type A Marine Fuel Hose
Complete Your 3/8" Fuel Line Setup
Pro Marine stocks the correct clamp, primer bulb and installation tools needed to build or service a 3/8" marine fuel-line assembly.
Oetiker 4-185 Ear Clamp - 10 Pack
Matching Oetiker ear clamp for this 3/8" Type B hose. This same clamp is also used with the 3/8" Type A hose listed below.
Clamp: 4-185
View Oetiker 4-185 Clamp
Pro Marine 8005 - 3/8" Primer Bulb
Matching 3/8" primer bulb for building or repairing marine outboard fuel-line assemblies using 3/8" fuel hose.
Hose Size: 3/8"
View 3/8" Primer Bulb
Oetiker Standard Jaw Pincer Tool
Installation tool for properly closing Oetiker ear clamps on marine fuel-line connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. A convenient setup for marine shops, technicians and customers servicing multiple hose sizes.
View Oetiker Clamp Pack3/8" Type A Alternative
3/8" Type A Marine Fuel Hose - 375-1
Use the Type A version when the installation requires the additional Type A fire-resistant marine fuel-hose classification.
Inside Diameter: 3/8"
Fuel Hose Type: Type A
Matching Clamp: Oetiker 4-185
Primer Bulb: Pro Marine 8005 - 3/8"
3/8" Type A vs. Type B Fuel Hose
| Fuel Hose | Classification | Matching Clamp | Primer Bulb |
|---|---|---|---|
| 375 | Type B | Oetiker 4-185 | Pro Marine 8005 - 3/8" |
| 375-1 | Type A | Oetiker 4-185 | Pro Marine 8005 - 3/8" |
Same Clamp for Both 3/8" Fuel Hoses
Unlike some of the smaller fuel-hose sizes, both of these 3/8" fuel-line options use the same Oetiker 4-185 clamp.
That means the clamp selection stays the same whether you choose the Type A or Type B 3/8" hose. The main decision between the two hoses is the required marine fuel-hose classification for the installation.
What This Fuel Hose is Used For
The 375 3/8" Type B fuel hose is used for building, repairing or replacing marine fuel lines where 3/8" hose and Type B construction are appropriate.
Bulk hose sold by the foot makes it possible to build the required length and pair it with the correct primer bulb, fittings and clamps for the specific boat and engine installation.
Building a 3/8" Outboard Fuel Line
Depending on the application, a complete 3/8" fuel-line setup may include:
- 3/8" Type B marine fuel hose
- Pro Marine 8005 3/8" primer bulb
- Correct tank-side fitting or connector
- Correct engine-side fitting or connector
- Oetiker 4-185 ear clamps
- Oetiker pincer installation tool
Primer Bulb Selection
Primer bulb fittings should match the inside diameter of the fuel hose. For 3/8" fuel line, use the Pro Marine 8005 3/8" Primer Bulb.
View Pro Marine 8005 3/8" Primer Bulb
Key Features & Benefits
- 3/8" inside diameter
- Marine Type B fuel hose
- Commonly used for exposed and above-deck installations where Type B hose is appropriate
- Sold by the foot for custom-length installations
- Uses Oetiker 4-185 ear clamp
- Matching Pro Marine 8005 3/8" primer bulb available
- 3/8" Type A alternative available
- Type A and Type B hoses both use the same 4-185 clamp
- Oetiker pincer installation tool available
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Marine Fuel Hose?
Fuel-hose diameter is only one part of choosing the correct line. Installation location, Type A or Type B classification, primer bulb size, fittings and clamp selection should all be considered.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is this fuel hose?
This hose has a 3/8" inside diameter.
Is this fuel hose sold by the foot?
Yes. Order the quantity corresponding to the total number of feet needed.
What type of marine fuel hose is this?
This is Type B marine fuel hose.
Which clamp fits this 3/8" Type B hose?
Use the
Oetiker 4-185 ear clamp
.
Which primer bulb fits this hose?
Use the
Pro Marine 8005 3/8" Primer Bulb
.
What if I need 3/8" Type A fuel hose?
Use the
375-1 3/8" Type A Marine Fuel Hose
.
Does the 3/8" Type A hose use the same clamp?
Yes. Both the Type A and Type B 3/8" hoses use the
Oetiker 4-185 ear clamp.
Can I use the same primer bulb with the Type A hose?
Yes. Both hoses have a 3/8" inside diameter, so the
Pro Marine 8005 3/8" primer bulb is the matching size
for either hose.
What tool installs the Oetiker clamps?
Use the
Oetiker Standard Jaw Pincer Tool
.
Do you sell a complete clamp assortment?
Yes. The
Oetiker Clamp Pack with Tool
includes commonly used clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help choosing the correct fuel-line parts?
Contact Pro Marine
Phone: 941-721-3000
Searchable Part Numbers & Terms
375, MPI 375, 3/8 fuel hose, 3/8 marine fuel hose, 3/8 boat fuel line, 3/8 outboard fuel hose, Type B marine fuel hose, Type B fuel line, marine fuel line by the foot, bulk marine fuel hose, above deck fuel hose, Oetiker 4-185, 4-185 fuel hose clamp, 8005, Pro Marine 8005, 3/8 primer bulb, marine primer bulb, outboard primer bulb, 375-1, 3/8 Type A fuel hose, marine fuel hose, outboard fuel line, boat fuel hose
