S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
Quicksilver 10W30 Oil Change Kit
Mercury 3.4L V6 & 4.6L V8 175HP-300HP Oil Change Kit
This Quicksilver oil change kit contains the routine maintenance components needed to service compatible Mercury 3.4L V6 and 4.6L V8 175HP-300HP FourStroke outboards.
The kit includes Quicksilver SAE 10W30 4-stroke marine engine oil, premium oil filter, oil drain hose, and service components to help simplify routine engine oil maintenance.
Compatible Applications
| Engine Platform | Horsepower Range | Engine Type | Application Notes |
|---|---|---|---|
| Mercury 3.4L V6 | 175HP-225HP | FourStroke | Select compatible models |
| Mercury 4.6L V8 | 250HP-300HP | FourStroke | Select compatible models |
What is Included
| Qty | Included Part | Part Number |
|---|---|---|
| 1 | Premium Oil Filter | Included |
| 7 | Quicksilver SAE 10W30 4-Stroke Marine Engine Oil | Included |
| 1 | Oil Drain Hose | Included |
We also stock OEM Mercury and Sierra versions of this oil change kit for Mercury V6 and V8 FourStroke outboards.
View OEM Mercury 10W30 Synthetic Blend Oil Change Kit
View Sierra 10W30 Oil Change Kit
What This Kit is Used For
This Quicksilver oil change kit provides the routine maintenance parts needed to perform an engine oil and oil filter service on compatible Mercury V6 and V8 FourStroke outboards.
Quicksilver marine engine oil is formulated for marine applications and helps provide lubrication stability, corrosion protection, and viscosity retention during operation and storage.
Routine oil and filter maintenance helps support proper engine performance, reduce wear, and extend engine life in demanding marine environments.
Some customers prefer OEM Mercury maintenance kits while others choose Quicksilver or Sierra service kits depending on maintenance preferences and budget.
Key Features and Benefits
- Quicksilver oil change kit for Mercury V6 and V8 FourStroke outboards
- Fits Mercury 175HP through 300HP applications
- Includes Quicksilver SAE 10W30 marine engine oil
- Includes premium oil filter and oil drain hose
- Designed for routine oil and filter maintenance
- Supports proper lubrication and engine protection
- Helps simplify scheduled maintenance service
- Convenient all-in-one maintenance kit
Oil Kit Details
- Kit Part Number: 8M0169548
- Engine Compatibility: Mercury 3.4L V6 & 4.6L V8 175HP-300HP FourStroke
- Oil Type: Quicksilver SAE 10W30 4-Stroke Marine Engine Oil
- Oil Quantity: 7 Liters
- Included Components: Oil filter, engine oil, oil drain hose, and service components
- Service Type: Routine engine oil and oil filter maintenance
FAQ
What engines does this oil change kit fit?
This kit fits compatible Mercury 3.4L V6 and 4.6L V8
175HP-300HP FourStroke outboards.
What is the difference between the Quicksilver, Mercury, and Sierra kits?
The OEM Mercury kit includes genuine Mercury-branded components and synthetic blend oil. Quicksilver and Sierra kits provide alternative maintenance options depending on brand preference and oil formulation.
Does this kit include a drain hose?
Yes. This kit includes an oil drain hose to help simplify routine oil maintenance and reduce spills during service.
How much oil is included in this kit?
This kit includes seven liters of Quicksilver SAE 10W30 4-stroke marine engine oil.
Can I perform this oil change service myself?
Yes. Many boat owners perform routine oil and filter maintenance themselves using basic hand tools and the proper service parts. Always follow your engine manufacturer’s service procedures and verify proper oil capacity before operation.
If you do not feel comfortable performing maintenance yourself, a Mercury-certified marine technician can typically complete this service quickly and help verify your engine is operating properly.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0169548, Quicksilver oil change kit, Mercury V6 oil change kit, Mercury V8 oil change kit, Mercury 175HP oil change kit, Mercury 200HP oil change kit, Mercury 225HP oil change kit, Mercury 250HP oil change kit, Mercury 300HP oil change kit, Quicksilver 10W30 marine oil kit, Mercury FourStroke maintenance kit
8M0169547
8M0169548
8M0187621
33491
33491
SW661
18-5836
25661
25661T1
256611
508905
72480
6E5-48344-00-00
Aftermarket Yamaha Steering & Control Cable Joint Ball
Yamaha Shaft Joint Ball Cable End Replacement
The Pro Marine 3-12-EU06146 Shaft, Joint Ball is a replacement Yamaha cable end joint used in many Yamaha steering cable, throttle cable, shift cable, and control cable systems.
This part replaces Yamaha OEM numbers EU0-U1461-30-00 and EU0-61461-30-00. Commonly found on Yamaha WaveRunner personal watercraft, Yamaha jet boats, and Yamaha marine control systems.
Compatible Applications
| Brand | Application Type | Common Model Families | System Type |
|---|---|---|---|
| Yamaha | WaveRunner / PWC | SuperJet, WaveRunner, VXR, FX1, Raider, Venture, SUV1200, XLT1200 | Steering & Control Cables |
| Yamaha | Jet Boats | AR210, AR230, AR240, SX210, SX230, SX240, 212X, 242 Limited | Shift & Steering Systems |
| Yamaha | FSH Sport Boats | 190 FSH, 210 FSH, 212 FSH | Control Cable Assemblies |
Yamaha OEM part number EU0-U1461-30-00 supersedes to EU0-61461-30-00.
This joint ball shaft has been used across hundreds of Yamaha steering and control cable assemblies over multiple generations of Yamaha WaveRunner and Yamaha jet boat applications.
Always verify your OEM number and cable assembly before ordering.
OEM Part Numbers & Cross References
| Part Type | Part Number |
|---|---|
| Pro Marine | 3-12-EU06146 |
| Yamaha OEM | EU0-61461-30-00 |
| Yamaha OEM Superseded Number | EU0-U1461-30-00 |
OEM Yamaha Alternative
Looking for the genuine Yamaha OEM version of this part?
Yamaha OEM Shaft Ball Joint EU0-61461-30-00
The OEM Yamaha version may be preferred for customers wanting factory-original Yamaha steering and control system components.
What This Part is Used For
The Yamaha shaft joint ball is used as a linkage connection point within Yamaha steering cable systems, throttle cable systems, and shift cable assemblies.
This component allows smooth articulation and movement between the cable assembly and the steering or control mechanism while maintaining secure attachment under marine operating conditions.
Worn or damaged cable end joints can contribute to steering play, poor throttle response, stiff operation, or unreliable shifting.
Key Features & Benefits
- Replaces Yamaha OEM EU0-61461-30-00
- Replaces Yamaha OEM EU0-U1461-30-00
- Used in Yamaha steering and control cable systems
- Compatible with many Yamaha WaveRunner applications
- Compatible with many Yamaha jet boat applications
- Used in shift cable and throttle cable assemblies
- Helps restore proper steering and cable operation
- Aftermarket replacement from Pro Marine
- OEM Yamaha replacement option linked above
Part Details
- Part Number: 3-12-EU06146
- Part Type: Shaft, Joint Ball
- Application: Yamaha Steering & Control Cable Systems
- OEM Replacement: EU0-61461-30-00
- Superseded OEM Number: EU0-U1461-30-00
- Manufacturer: Pro Marine
FAQ
What Yamaha OEM numbers does this replace?
This part replaces Yamaha OEM numbers
EU0-61461-30-00 and EU0-U1461-30-00.
What systems use this joint ball shaft?
This part is commonly used in Yamaha steering cable,
throttle cable, shift cable, and marine control systems.
Does this fit Yamaha WaveRunner models?
Yes. This part is used on many Yamaha WaveRunner and personal watercraft applications.
Does this fit Yamaha jet boats?
Yes. This joint ball shaft is also used in many Yamaha jet boat steering and control systems.
Is there an OEM Yamaha version available?
Yes. The genuine Yamaha OEM Shaft Ball Joint EU0-61461-30-00
is linked above.
How can I verify fitment?
Match your existing OEM number to EU0-61461-30-00 or EU0-U1461-30-00
before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on qualifying orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST typically ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with fitment or ordering?
Contact Us
Phone: 941-721-3000
Searchable Terms
3-12-EU06146, EU0-61461-30-00, EU0-U1461-30-00, Yamaha shaft joint ball, Yamaha steering cable joint, Yamaha steering cable end, Yamaha throttle cable joint, Yamaha shift cable end, Yamaha control cable connector, Yamaha jet boat steering cable, Yamaha WaveRunner steering cable, Yamaha PWC steering cable, Yamaha SuperJet steering parts, Yamaha AR240 steering cable, Yamaha SX230 steering system, Yamaha jet boat control cable, Yamaha marine cable linkage, Yamaha steering linkage joint, Yamaha cable ball joint, Yamaha WaveRunner cable end, Yamaha OEM shaft ball joint
EU0-61461-30-00
Suzuki V6 & V8 Outboard Oil Change Kit
Suzuki DF150 DF175 DF200 DF225 DF250 DF300 DF350A Oil Change Kit
The DF150350-OC Suzuki Oil Change Kit includes the maintenance components required to perform a complete engine oil service on a wide range of Suzuki V6 and V8 four-stroke outboards.
This kit includes 2 gallons plus 1 quart (9 quarts total) of Suzuki ECSTAR V7000 10W40 Semi-Synthetic Marine Engine Oil, a genuine OEM Suzuki oil filter, and the required oil drain screw washer.
Compatible Applications
| Model | Engine Family |
|---|---|
| DF150 | 4-Stroke V6 |
| DF175 | 4-Stroke V6 |
| DF200 | 4-Stroke V6 |
| DF200A | 4-Stroke V6 |
| DF225 | 4-Stroke V6 |
| DF250 | 4-Stroke V6 |
| DF300 | 4-Stroke V6 |
| DF300B | Dual Prop V6 |
| DF350A | Dual Prop V6 |
This oil change kit fits many popular Suzuki V6 and V6 Dual Prop outboards including DF150, DF175, DF200, DF200A, DF225, DF250, DF300, DF300B, and DF350A models.
The kit includes 9 quarts of engine oil (2 gallons plus 1 quart), making it ideal for routine oil service on these larger displacement Suzuki outboards.
What is Included
| Qty | Part | Description |
|---|---|---|
| 2 | Suzuki ECSTAR V7000 10W40 Oil - Gallon | 2 gallons semi-synthetic marine engine oil |
| 1 | Suzuki ECSTAR V7000 10W40 Oil - Quart | 1 additional quart of semi-synthetic marine engine oil |
| 1 | OEM Suzuki Oil Filter 16510-96J10 | Genuine Suzuki oil filter |
| 1 | Oil Drain Screw Gasket / Washer 5030465 | Required drain screw sealing washer for engine oil service |
Recommended Gear Lube
Gear lube is not included in this oil change kit. Suzuki recommends regular lower unit service along with scheduled engine maintenance.
Suzuki Marine Gear Lube
Premium Suzuki gear lube for lower unit maintenance and gearcase protection.
View Suzuki Gear LubeNeed Additional Engine Oil?
About Suzuki ECSTAR V7000 10W40
ECSTAR V7000 Semi-Synthetic Marine Engine Oil is engineered specifically for Suzuki four-stroke outboards. It helps protect against wear, corrosion, deposits, and high-temperature operation commonly encountered in marine environments.
Benefits of ECSTAR Marine Oil
- Excellent wear protection
- Reduced oil consumption
- Improved fuel economy
- Corrosion protection for marine environments
- Enhanced engine cleanliness
- Designed specifically for Suzuki outboards
What This Kit is Used For
This kit provides the engine oil, oil filter, and drain washer required for routine oil change service on Suzuki DF150 through DF350A outboards.
Regular oil changes are one of the most important maintenance procedures for extending engine life and maintaining peak performance.
Key Features and Benefits
- Fits DF150, DF175, DF200, DF200A, DF225, DF250, DF300, DF300B and DF350A
- Includes 2 gallons and 1 quart of Suzuki ECSTAR 10W40 oil
- Includes OEM Suzuki oil filter 16510-96J10
- Includes oil drain screw gasket / washer 5030465
- Uses genuine Suzuki maintenance components
- Gear lube available separately
- Convenient all-in-one oil service package
Service Kit Details
- Part Number: DF150350-OC
- Oil Included: Yes
- Oil Quantity: 2 Gallons + 1 Quart (9 Quarts Total)
- Oil Type: Suzuki ECSTAR V7000 10W40 Semi-Synthetic
- Oil Filter Included: Yes - OEM Suzuki 16510-96J10
- Drain Washer Included: Yes - 5030465
- Gear Lube Included: No
FAQ
What Suzuki outboards does this kit fit?
DF150, DF175, DF200, DF200A, DF225, DF250, DF300, DF300B, and DF350A models.
How much oil is included?
This kit includes 2 gallons plus 1 quart of Suzuki ECSTAR 10W40 oil.
Does this kit include a genuine Suzuki oil filter?
Yes. The kit includes OEM Suzuki oil filter 16510-96J10.
Does this kit include the drain washer?
Yes. The required oil drain screw gasket / washer 5030465 is included.
Does this kit include gear lube?
No. Gear lube is sold separately.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Products must be new and unused.
- Return authorization required.
Searchable Terms
DF150350-OC, Suzuki DF150 oil change kit, Suzuki DF175 oil change kit, Suzuki DF200 oil change kit, Suzuki DF225 oil change kit, Suzuki DF250 oil change kit, Suzuki DF300 oil change kit, Suzuki DF300B oil change kit, Suzuki DF350A oil change kit, 16510-96J10, Suzuki oil filter, 5030465, Suzuki drain washer, Suzuki gear lube, SUZ-GLUBE-QT, Suzuki ECSTAR 10W40, SUZ-10W40-GAL, SUZ-10W40-QT
0766495
311875
766495
3Y9022340
3Y9022340M
52444
52456
52456A1
55501
55501A1
57250
57250A1
60494
60494A1
60494A4
60494A5
604941
802893
802893A4
802893Q
802893Q01
802893Q4
802893T
805269
805269A4
8052691
806771
807172
807172A4
9-37800
9999937801
9999937851
9999937851M
Genuine Yamaha OEM Steering & Control Cable Joint Ball
Yamaha OEM Shaft Ball Joint EU0-61461-30-00
The Yamaha OEM EU0-61461-30-00 Shaft Ball Joint is a genuine Yamaha replacement component used in many Yamaha steering cable, throttle cable, shift cable, and marine control systems.
This genuine Yamaha OEM part supersedes EU0-U1461-30-00 and is commonly found on Yamaha WaveRunner personal watercraft, Yamaha jet boats, and Yamaha marine steering and control cable assemblies.
Compatible Applications
| Brand | Application Type | Common Model Families | System Type |
|---|---|---|---|
| Yamaha | WaveRunner / PWC | SuperJet, WaveRunner, VXR, FX1, Raider, Venture, SUV1200, XLT1200 | Steering & Control Cables |
| Yamaha | Jet Boats | AR210, AR230, AR240, SX210, SX230, SX240, 212X, 242 Limited | Shift & Steering Systems |
| Yamaha | FSH Sport Boats | 190 FSH, 210 FSH, 212 FSH | Control Cable Assemblies |
Yamaha OEM number EU0-U1461-30-00 has been superseded by EU0-61461-30-00.
This OEM Yamaha shaft ball joint is used across hundreds of Yamaha steering and control cable assemblies covering many Yamaha WaveRunner, PWC, jet boat, and sport boat applications.
Always verify your OEM number and cable assembly before ordering.
OEM Part Numbers & Cross References
| Part Type | Part Number |
|---|---|
| Yamaha OEM | EU0-61461-30-00 |
| Yamaha OEM Superseded Number | EU0-U1461-30-00 |
Aftermarket Alternative
Looking for a more affordable aftermarket replacement option?
Pro Marine Aftermarket Shaft Joint Ball 3-12-EU06146
The Pro Marine aftermarket version replaces the same Yamaha OEM numbers and is a cost-effective replacement for many Yamaha steering and control cable applications.
What This Part is Used For
The Yamaha OEM shaft ball joint is used as a linkage connection point within Yamaha steering cable systems, throttle cable systems, shift cable assemblies, and marine control systems.
This component allows smooth articulation and movement between the cable assembly and steering or control mechanisms while maintaining secure operation in marine environments.
Damaged or worn cable joint components can contribute to loose steering, poor throttle response, difficult shifting, or unreliable control system operation.
Key Features & Benefits
- Genuine Yamaha OEM component
- Current Yamaha OEM number EU0-61461-30-00
- Supersedes Yamaha EU0-U1461-30-00
- Used in Yamaha steering and control cable systems
- Fits many Yamaha WaveRunner and PWC applications
- Fits many Yamaha jet boat applications
- Used in steering, shift, and throttle cable assemblies
- OEM factory Yamaha fit and quality
- Aftermarket Pro Marine alternative linked above
Part Details
- Part Number: EU0-61461-30-00
- Superseded Number: EU0-U1461-30-00
- Part Type: Shaft Ball Joint
- Application: Yamaha Steering & Control Cable Systems
- Manufacturer: Yamaha OEM
FAQ
What OEM number does this replace?
EU0-61461-30-00 supersedes Yamaha OEM number EU0-U1461-30-00.
What systems use this shaft ball joint?
This part is commonly used in Yamaha steering cable,
shift cable, throttle cable, and marine control systems.
Does this fit Yamaha WaveRunner models?
Yes. This OEM Yamaha part is used across many Yamaha WaveRunner and personal watercraft applications.
Does this fit Yamaha jet boats?
Yes. This shaft ball joint is also used on many Yamaha jet boat steering and control systems.
Is there a less expensive aftermarket option?
Yes. The Pro Marine aftermarket replacement version is linked above.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on qualifying orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST typically ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with fitment or ordering?
Contact Us
Phone: 941-721-3000
Searchable Terms
EU0-61461-30-00, EU0-U1461-30-00, Yamaha OEM shaft ball joint, Yamaha steering cable joint, Yamaha steering cable end, Yamaha throttle cable joint, Yamaha shift cable end, Yamaha control cable connector, Yamaha jet boat steering cable, Yamaha WaveRunner steering cable, Yamaha PWC steering cable, Yamaha SuperJet steering parts, Yamaha AR240 steering cable, Yamaha SX230 steering system, Yamaha marine cable linkage, Yamaha steering linkage joint, Yamaha cable ball joint, Yamaha WaveRunner cable end, genuine Yamaha steering joint, Yamaha OEM marine control cable part, 3-12-EU06146 aftermarket alternative
EU0-61461-30-00
SW105
SW463
18-5811
3850216
3859054
72450
809462
809462
8094621
809463
809463A1
8094631
