Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Chrysler & Force Outboard Parts

Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.

Shop Chrysler / Force Outboard Parts by System

Find the Correct Chrysler or Force Outboard Part

Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.

Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.

Use Our OEM Parts Lookup »

Common Chrysler & Force Outboard Engine Families

Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.

  • Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
  • Midrange: popular 35HP through 85HP applications across multiple engine generations
  • Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
  • High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
  • Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications

Common Chrysler & Force Repair and Rebuild Problems

  • No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
  • Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
  • Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
  • Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
  • Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
  • Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.

Repair Individual Systems or Build Your Own Rebuild

Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.

Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.

Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?

  • Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
  • Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
  • Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of rebuild and replacement components for older outboard engines.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Chrysler or Force outboard part?

Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.

Can I search Chrysler and Force parts by OEM part number?

Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.

Do Chrysler and Force outboard parts interchange?

Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.

Do you carry parts for older Force outboards?

Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.

Do you carry Chrysler outboard engine rebuild parts?

Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.

What Chrysler and Force parts are commonly replaced during maintenance?

Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.

Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

← Back to Outboard

|◀ ◀ 481 - 492 of 999 ▶ ▶|
View:
Bore Size 2.995
Item#:
2995KD
Manufacturer:
Wiseco
Available:
Special Order
Your Price:
30.85
Each
Bore Size 3.894
Item#:
3894KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.933
Item#:
2933TD
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
54.95
Each
Bore Size 2.755
Item#:
2755KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 2.697
Item#:
2697CD
Manufacturer:
Wiseco
Available:
In Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.584
Item#:
3584KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.556"
Item#:
2556CDM
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
25.95
Each
Replacement Hydraulic Cylinder for 350-HSTEER Systems

Replacement Hydraulic Steering Cylinder

Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder

The Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder is the replacement steering cylinder used with the Pro Marine 350-HSTEER hydraulic steering system. It is designed for high-horsepower single outboard setups where smooth, controlled steering response is critical.

This is the cylinder only. Helm pump, hoses, steering fluid, and fill/bleed accessories are sold separately unless purchased as part of the complete 350-HSTEER system.

What This Cylinder Is Used For

The steering cylinder converts hydraulic pressure from the helm pump into side-to-side movement at the outboard engine. It is the component that physically moves the engine when you turn the steering wheel.

If your current cylinder is leaking, damaged, binding, or worn, replacing it can restore proper steering control and improve the overall feel of the system.

Pro Tip: When replacing a steering cylinder, inspect your hydraulic hoses, helm pump, fittings, and fluid condition at the same time. A clean hydraulic system helps protect the new cylinder and improves steering performance.

Read our 350-HSTEER Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
350-HSTEER Systems Replacement hydraulic steering cylinder
Single Outboards up to 350HP High-horsepower hydraulic steering applications
Bass Boats Responsive steering and control at speed
Bay Boats Smooth steering in shallow and open water
Center Consoles Reliable steering feel for offshore and coastal use

Build or Service Your Steering System

Complete Steering Kit

Need the full system instead of just the cylinder? The complete kit includes the cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Helm Pump

Pair this cylinder with the matching Pro Marine helm pump for proper hydraulic steering operation.

View 350-HELM-025 Helm Pump

Hydraulic Hoses

Select the correct hydraulic hose length for your boat, jack plate, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

Fluid & Fill Hose

Hydraulic fluid and a fill hose assembly help make installation and bleeding easier during service.

View PRO-OIL15 Hydraulic Fluid
View 102P Fill Hose Assembly

Complete Your Steering Setup

Key Features and Benefits

  • Replacement hydraulic steering cylinder for 350-HSTEER systems
  • Designed for high-horsepower single outboard steering applications
  • Helps restore smooth steering movement and control
  • Front-mount hydraulic steering cylinder design
  • Works with hydraulic helm, hose, and fluid circuit
  • Good option for service, repair, or steering system rebuilds

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Steering cylinder
  • Connection Type: Hydraulic hose connections to helm circuit
  • Typical Use: Single outboard applications up to 350HP when used with the proper system
  • Related Components: Helm pump, hydraulic hoses, steering fluid, fittings, and fill/bleed tools

FAQ

Is this the complete steering system?
No. This listing is for the hydraulic steering cylinder only. The complete system is available as the Pro Marine 350-HSTEER kit.

What system does this cylinder work with?
This cylinder is designed for use with the Pro Marine 350-HSTEER hydraulic steering system.

Are hydraulic hoses included?
No. Hydraulic hoses are sold separately so you can choose the correct length for your boat and rigging layout.

When should I replace a steering cylinder?
Replace the cylinder if it is leaking, damaged, binding, corroded, or no longer holding proper steering control.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-HSTEER-CYL, Pro Marine hydraulic steering cylinder, hydraulic steering cylinder, outboard steering cylinder, front mount steering cylinder, 350-HSTEER replacement cylinder, hydraulic steering repair, boat steering cylinder

Item#:
350-HSTEER-CYL
Manufacturer:
Pro Marine
Available:
In Stock
 
Oversized Shipping
Your Price:
704.41
Each
Bore Size 2.756
Item#:
2756CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.032
Item#:
3032TC
Manufacturer:
Wiseco
Available:
Out of Stock
26.7600
Your Price:
24.95
Each
Bore Size 3.032
Item#:
3032TD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
54.95
Each
Bore Size 3.464
Item#:
3464KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
|◀ ◀ 481 - 492 of 999 ▶ ▶|
View: