S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Chrysler & Force Outboard Parts
Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.
Shop Chrysler / Force Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints for Lower Unit and Engine
- Service Manuals
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Chrysler or Force Outboard Part
Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.
Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.
Use Our OEM Parts Lookup »Common Chrysler & Force Outboard Engine Families
Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.
- Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
- Midrange: popular 35HP through 85HP applications across multiple engine generations
- Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
- High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
- Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications
Common Chrysler & Force Repair and Rebuild Problems
- No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
- Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
- Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
- Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
- Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
- Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.
Repair Individual Systems or Build Your Own Rebuild
Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.
Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.
Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?
- Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
- Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
- Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of rebuild and replacement components for older outboard engines.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Chrysler or Force outboard part?
Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.
Can I search Chrysler and Force parts by OEM part number?
Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.
Do Chrysler and Force outboard parts interchange?
Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.
Do you carry parts for older Force outboards?
Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.
Do you carry Chrysler outboard engine rebuild parts?
Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.
What Chrysler and Force parts are commonly replaced during maintenance?
Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.
Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
25cc Hydraulic Steering Helm Pump
Pro Marine 350-HELM-025 Hydraulic Helm Pump
The Pro Marine 350-HELM-025 Hydraulic Helm Pump is a 25cc hydraulic steering helm designed for smooth, controlled steering response on modern outboard boats.
This helm is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
What a Hydraulic Helm Pump Does
The helm pump is the core component of a hydraulic steering system. When the steering wheel is turned, the helm creates hydraulic pressure that moves fluid through the hoses and steering cylinder to turn the engine.
A properly matched helm pump helps provide predictable steering feel, reduced steering effort, and smooth handling at both low and high speeds.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Single Outboards up to 350HP | Hydraulic steering helm applications |
| Bass Boats | Performance steering and responsive handling |
| Bay Boats | Smooth low-speed and cruising control |
| Center Consoles | Reliable offshore and coastal steering feel |
| Repower Projects | Excellent upgrade from traditional cable steering |
Complete or Service Your Steering System
Complete Steering Kit
Need the full steering package? The 350-HSTEER kit includes the helm, cylinder, fluid, and fill hose assembly.
View 350-HSTEER Complete KitSteering Cylinder
This helm works with many standard hydraulic steering cylinders, including Pro Marine, SeaStar®, and Uflex® compatible systems.
View 350-HSTEER-CYL CylinderHydraulic Hoses
Select the proper hydraulic hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Accessories
Hydraulic fluid and fill hose assemblies help simplify installation and steering system bleeding.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Key Features and Benefits
- 25cc hydraulic helm pump design
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Smooth steering response and controlled handling
- Designed for high-horsepower single outboards
- Helps reduce steering effort compared to cable steering
- Good option for bass boats, bay boats, and offshore applications
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Hydraulic helm pump
- Helm Size: 25cc
- Connection Type: Hydraulic steering hose circuit
- Typical Use: Single outboard hydraulic steering systems
- Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
- Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit
FAQ
What does a hydraulic helm pump do?
The helm pump converts steering wheel movement into hydraulic pressure that moves the steering cylinder.
What size is this helm?
This is a 25cc hydraulic helm pump.
What steering systems is this helm compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
Is this the complete steering system?
No. This listing is for the helm pump only.
Can I buy the complete steering kit instead?
Yes. The complete 350-HSTEER kit includes the helm pump, steering cylinder, fluid, and fill hose assembly.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HELM-025, hydraulic helm pump, 25cc helm, SeaStar compatible helm, Uflex compatible helm, Pro Marine helm pump, hydraulic steering helm, outboard steering helm, front mount hydraulic steering
37cc Hydraulic Steering Helm Pump
Pro Marine 350-HELM-037 Hydraulic Helm Pump
The Pro Marine 350-HELM-037 Hydraulic Helm Pump is a 37cc hydraulic steering helm designed for smooth, responsive steering control on high-horsepower outboard boats.
This Pro Marine helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
What a 37cc Helm Pump Does
The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.
A 37cc helm moves more fluid per steering wheel turn than smaller 25cc or 30cc helms, which can create quicker steering response and fewer turns lock-to-lock when matched with the correct hydraulic steering cylinder.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Single Outboards up to 350HP | Hydraulic steering helm applications requiring quicker response |
| Bass Boats | Performance steering feel and reduced wheel turns |
| Bay Boats | Responsive control for shallow-water and open-water use |
| Center Consoles | Controlled steering feel for coastal and offshore running |
| Performance Setups | Useful where faster steering response is preferred |
Complete or Service Your Steering System
Complete Steering Kit
Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitSteering Cylinder
Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.
View 350-HSTEER-CYL CylinderHydraulic Hoses
Choose the correct hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Accessories
Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Key Features and Benefits
- 37cc hydraulic helm pump design
- 2.25 cubic inches per revolution hydraulic displacement
- Moves more fluid per wheel turn than 25cc and 30cc helms
- Can provide quicker steering response when properly matched
- Designed for the Pro Marine 350-HSTEER hydraulic steering system
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Good choice for performance boats and high-horsepower outboards
- Helps reduce steering effort compared to cable steering
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Hydraulic helm pump
- Helm Size: 37cc
- Displacement: 2.25 cu in/rev
- Connection Type: Hydraulic steering hose circuit
- Typical Use: Single outboard hydraulic steering systems
- Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
- Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit
FAQ
What does a 37cc hydraulic helm pump do?
It converts steering wheel movement into hydraulic pressure and moves fluid through the steering system to turn the outboard.
What is the difference between a 30cc and 37cc helm?
A 37cc helm moves more fluid per wheel turn than a 30cc helm, which can reduce turns lock-to-lock and create a quicker steering feel when matched correctly.
What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
Is this the complete steering system?
No. This listing is for the helm pump only.
Should I choose the 30cc or 37cc helm?
Choose based on your steering cylinder, boat setup, and desired steering feel. The 37cc helm is generally the more responsive option.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HELM-037, hydraulic helm pump, 37cc helm pump, Pro Marine 37cc helm, 2.25 cu in helm pump, SeaStar compatible helm, Uflex compatible helm, hydraulic steering helm, outboard steering helm, performance steering helm, 350-HSTEER helm pump
37cc Hydraulic Steering Helm Pump
Pro Marine 350-HELM-037 Hydraulic Helm Pump
The Pro Marine 350-HELM-037 Hydraulic Helm Pump is a 37cc hydraulic steering helm designed for smooth, responsive steering control on high-horsepower outboard boats.
This Pro Marine helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
What a 37cc Helm Pump Does
The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.
A 37cc helm moves more fluid per steering wheel turn than smaller 25cc or 30cc helms, which can create quicker steering response and fewer turns lock-to-lock when matched with the correct hydraulic steering cylinder.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Single Outboards up to 350HP | Hydraulic steering helm applications requiring quicker response |
| Bass Boats | Performance steering feel and reduced wheel turns |
| Bay Boats | Responsive control for shallow-water and open-water use |
| Center Consoles | Controlled steering feel for coastal and offshore running |
| Performance Setups | Useful where faster steering response is preferred |
Complete or Service Your Steering System
Complete Steering Kit
Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitSteering Cylinder
Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.
View 350-HSTEER-CYL CylinderHydraulic Hoses
Choose the correct hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Accessories
Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Key Features and Benefits
- 37cc hydraulic helm pump design
- 2.25 cubic inches per revolution hydraulic displacement
- Moves more fluid per wheel turn than 25cc and 30cc helms
- Can provide quicker steering response when properly matched
- Designed for the Pro Marine 350-HSTEER hydraulic steering system
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Good choice for performance boats and high-horsepower outboards
- Helps reduce steering effort compared to cable steering
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Hydraulic helm pump
- Helm Size: 37cc
- Displacement: 2.25 cu in/rev
- Connection Type: Hydraulic steering hose circuit
- Typical Use: Single outboard hydraulic steering systems
- Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
- Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit
FAQ
What does a 37cc hydraulic helm pump do?
It converts steering wheel movement into hydraulic pressure and moves fluid through the steering system to turn the outboard.
What is the difference between a 30cc and 37cc helm?
A 37cc helm moves more fluid per wheel turn than a 30cc helm, which can reduce turns lock-to-lock and create a quicker steering feel when matched correctly.
What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
Is this the complete steering system?
No. This listing is for the helm pump only.
Should I choose the 30cc or 37cc helm?
Choose based on your steering cylinder, boat setup, and desired steering feel. The 37cc helm is generally the more responsive option.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HELM-037, hydraulic helm pump, 37cc helm pump, Pro Marine 37cc helm, 2.25 cu in helm pump, SeaStar compatible helm, Uflex compatible helm, hydraulic steering helm, outboard steering helm, performance steering helm, 350-HSTEER helm pump
44cc Hydraulic Steering Helm Pump
Pro Marine 350-HELM-044 Hydraulic Helm Pump
The Pro Marine 350-HELM-044 Hydraulic Helm Pump is a 44cc hydraulic steering helm designed for fast, responsive steering control on high-horsepower outboard boats.
This Pro Marine helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
What a 44cc Helm Pump Does
The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.
A 44cc helm moves more fluid per steering wheel turn than smaller 25cc, 30cc, or 37cc helms, which can create the quickest steering response and fewer turns lock-to-lock when matched with the correct hydraulic steering cylinder.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Single Outboards up to 350HP | Hydraulic steering helm applications requiring very quick response |
| Bass Boats | Performance steering feel and reduced wheel turns |
| Bay Boats | Fast steering response for shallow-water and open-water use |
| Center Consoles | Responsive steering feel for coastal and offshore running |
| Performance Setups | Useful where faster steering response and fewer turns are preferred |
Complete or Service Your Steering System
Complete Steering Kit
Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitSteering Cylinder
Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.
View 350-HSTEER-CYL CylinderHydraulic Hoses
Choose the correct hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Accessories
Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Key Features and Benefits
- 44cc hydraulic helm pump design
- 2.68 cubic inches per revolution hydraulic displacement
- Moves more fluid per wheel turn than 25cc, 30cc, and 37cc helms
- Can provide very quick steering response when properly matched
- Designed for the Pro Marine 350-HSTEER hydraulic steering system
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Good choice for performance boats and high-horsepower outboards
- Helps reduce steering effort compared to cable steering
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Hydraulic helm pump
- Helm Size: 44cc
- Displacement: 2.68 cu in/rev
- Connection Type: Hydraulic steering hose circuit
- Typical Use: Single outboard hydraulic steering systems
- Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
- Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit
FAQ
What does a 44cc hydraulic helm pump do?
It converts steering wheel movement into hydraulic pressure and moves fluid through the steering system to turn the outboard.
What is the difference between a 37cc and 44cc helm?
A 44cc helm moves more fluid per wheel turn than a 37cc helm, which can reduce turns lock-to-lock and create a quicker steering feel when matched correctly.
What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
Is this the complete steering system?
No. This listing is for the helm pump only.
Should I choose the 37cc or 44cc helm?
Choose based on your steering cylinder, boat setup, and desired steering feel. The 44cc helm is generally the more responsive option.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HELM-044, hydraulic helm pump, 44cc helm pump, Pro Marine 44cc helm, 2.68 cu in helm pump, SeaStar compatible helm, Uflex compatible helm, hydraulic steering helm, outboard steering helm, performance steering helm, 350-HSTEER helm pump