S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Chrysler & Force Outboard Parts
Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.
Shop Chrysler / Force Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints for Lower Unit and Engine
- Service Manuals
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Chrysler or Force Outboard Part
Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.
Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.
Use Our OEM Parts Lookup »Common Chrysler & Force Outboard Engine Families
Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.
- Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
- Midrange: popular 35HP through 85HP applications across multiple engine generations
- Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
- High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
- Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications
Common Chrysler & Force Repair and Rebuild Problems
- No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
- Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
- Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
- Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
- Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
- Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.
Repair Individual Systems or Build Your Own Rebuild
Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.
Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.
Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?
- Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
- Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
- Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of rebuild and replacement components for older outboard engines.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Chrysler or Force outboard part?
Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.
Can I search Chrysler and Force parts by OEM part number?
Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.
Do Chrysler and Force outboard parts interchange?
Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.
Do you carry parts for older Force outboards?
Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.
Do you carry Chrysler outboard engine rebuild parts?
Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.
What Chrysler and Force parts are commonly replaced during maintenance?
Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.
Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
888988001
0769072
346152
769072
855228
888988014
MPI Type B Marine Fuel Hose
MPI 1/4" Marine Fuel Hose - Type B - Sold by the Foot
The MPI 315-014 1/4" Fuel Hose is bulk marine fuel line for applications using 1/4" inside-diameter hose. It is sold by the foot so boat owners and marine technicians can build the exact fuel-line length required for the installation.
This is the Type B version, commonly used in exposed and above-deck marine fuel-line applications where Type B hose is permitted.
Pro Marine also stocks the matching Oetiker 4-133 clamp, Pro Marine 8002 1/4" primer bulb, Oetiker installation tools and a 1/4" Type A fuel hose option.
Inside Diameter: 1/4"
Manufacturer: MPI Products
Fuel Hose Type: Type B Marine Fuel Hose
Sold: By the Foot
Recommended Clamp: Oetiker 4-133
Recommended Primer Bulb: Pro Marine 8002 - 1/4"
How to Order Bulk Fuel Hose
This fuel hose is sold by the foot. Enter the quantity based on the continuous hose length required for your installation.
For example, if your fuel-line run requires 6 feet of hose, order a quantity of 6.
Type B Marine Fuel Hose
Marine fuel hose classifications identify how the hose is intended to be used within a boat's fuel system.
Type B fuel hose is commonly used for exposed or above-deck applications where that hose classification is appropriate. It does not carry the same additional fire-test classification as Type A marine fuel hose.
If your fuel line passes through an enclosed area or the installation specifically requires Type A hose, use the Type A option linked below.
For installations requiring the additional Type A fire-resistant classification, use the MPI 314-1 1/4" Type A fuel hose.
View 1/4" Type A Marine Fuel Hose
Complete Your 1/4" Fuel Line Setup
Build a complete 1/4" outboard fuel-line setup with the matching clamp, primer bulb and installation tools shown below.
Oetiker 4-133 Ear Clamp - 10 Pack
Matching Oetiker ear clamp for the MPI 315-014 1/4" Type B fuel hose.
Clamp Size: 4-133
View Oetiker 4-133 Clamp
Pro Marine 8002 - 1/4" Primer Bulb
Matching 1/4" primer bulb for building or repairing marine outboard fuel-line assemblies using 1/4" hose.
Hose Size: 1/4"
View 1/4" Primer Bulb
Oetiker Standard Jaw Pincer Tool
Installation tool for properly closing Oetiker ear clamps on marine fuel-line connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool
Complete assortment of common Oetiker clamp sizes with the installation tool included. A convenient option for technicians and marine shops servicing multiple hose sizes.
View Oetiker Clamp Pack1/4" Type A Alternative
MPI 1/4" Type A Marine Fuel Hose - 314-1
Use the Type A version when the installation requires the additional Type A fire-resistant marine fuel-hose classification.
Inside Diameter: 1/4"
Fuel Hose Type: Type A
Matching Clamp: Oetiker 4-170
1/4" Fuel Hose Comparison
| Fuel Hose | Classification | Matching Clamp | Primer Bulb |
|---|---|---|---|
| MPI 315-014 | Type B | Oetiker 4-133 | Pro Marine 8002 - 1/4" |
| MPI 314-1 | Type A | Oetiker 4-170 | Pro Marine 8002 - 1/4" |
Why Do Two 1/4" Hoses Use Different Clamps?
The 1/4" measurement refers to the hose's inside diameter. It does not determine the outside diameter of the hose.
Type A and Type B hose use different constructions and wall thicknesses, so their outside diameters can be different even when both have a 1/4" inside diameter.
That is why the MPI 315-014 Type B hose uses Oetiker 4-133, while the MPI 314-1 Type A hose uses Oetiker 4-170.
What This Fuel Hose is Used For
MPI 315-014 1/4" Type B fuel hose can be used for building, replacing or repairing marine fuel lines where 1/4" hose and a Type B classification are appropriate.
Because this hose is sold in bulk by the foot, it can be paired with the correct primer bulb, fittings and clamps to create a custom-length fuel-line assembly.
Building a 1/4" Outboard Fuel Line
A typical 1/4" outboard fuel-line assembly may require:
- MPI 315-014 1/4" Type B marine fuel hose
- Pro Marine 8002 1/4" primer bulb
- Correct tank-side fitting or connection
- Correct engine-side fitting or connector
- Oetiker 4-133 ear clamps
- Oetiker pincer installation tool
The exact components required depend on the engine, fuel tank and overall fuel-system layout.
Primer Bulb Selection
Primer bulb fittings should match the inside diameter of the fuel hose. For this 1/4" hose, use the Pro Marine 8002 1/4" Primer Bulb.
View Pro Marine 8002 1/4" Primer Bulb
Key Features & Benefits
- 1/4" inside diameter
- MPI Products marine fuel hose
- Type B marine fuel-hose construction
- Commonly used in exposed and above-deck applications where Type B hose is permitted
- Sold by the foot for custom-length installations
- Matching Oetiker 4-133 clamp available
- Matching Pro Marine 8002 1/4" primer bulb available
- Type A 1/4" alternative available
- Oetiker installation tool available
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Marine Fuel Hose?
Choosing the correct marine fuel line depends on hose diameter, installation location, fuel-hose classification, fittings, primer bulb size and clamp size.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is MPI 315-014?
It has a 1/4" inside diameter.
Is this hose sold by the foot?
Yes. Order the quantity corresponding to the total number of feet required.
What type of marine fuel hose is this?
This is MPI Type B marine fuel hose.
Where is Type B fuel hose commonly used?
Type B hose is commonly used for exposed and above-deck fuel-line
applications where that classification is permitted.
Which clamp fits MPI 315-014?
Use the
Oetiker 4-133 ear clamp
.
Which primer bulb fits this 1/4" hose?
Use the
Pro Marine 8002 1/4" Primer Bulb
.
Can I use the same primer bulb with the 1/4" Type A hose?
Yes. Both the 1/4" Type A and Type B hoses use a 1/4" inside diameter, so
the Pro Marine 8002 1/4" primer bulb is the matching hose size.
What if I need Type A 1/4" fuel hose?
Use the
MPI 314-1 1/4" Type A fuel hose
.
Which clamp fits the 1/4" Type A hose?
The Type A MPI 314-1 hose uses the
Oetiker 4-170 ear clamp
.
Why do the Type A and Type B 1/4" hoses use different clamps?
The 1/4" measurement is the inside diameter. Different hose construction
changes the outside diameter, so the clamp must be matched to the specific hose.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help choosing the correct fuel hose?
Contact Pro Marine
Phone: 941-721-3000
Searchable Part Numbers & Terms
315-014, MPI 315-014, 1/4 fuel hose, 1/4 marine fuel hose, 1/4 boat fuel line, 1/4 outboard fuel hose, Type B marine fuel hose, Type B fuel line, marine fuel line by the foot, bulk marine fuel hose, above deck fuel hose, MPI fuel line, Oetiker 4-133, 4-133 fuel hose clamp, 8002, Pro Marine 8002, 1/4 primer bulb, marine primer bulb, outboard primer bulb, 314-1, 1/4 Type A fuel hose, Oetiker 4-170, marine fuel hose, outboard fuel line, boat fuel hose