Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Chrysler & Force Outboard Parts

Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.

Shop Chrysler / Force Outboard Parts by System

Find the Correct Chrysler or Force Outboard Part

Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.

Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.

Use Our OEM Parts Lookup »

Common Chrysler & Force Outboard Engine Families

Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.

  • Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
  • Midrange: popular 35HP through 85HP applications across multiple engine generations
  • Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
  • High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
  • Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications

Common Chrysler & Force Repair and Rebuild Problems

  • No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
  • Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
  • Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
  • Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
  • Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
  • Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.

Repair Individual Systems or Build Your Own Rebuild

Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.

Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.

Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?

  • Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
  • Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
  • Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of rebuild and replacement components for older outboard engines.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Chrysler or Force outboard part?

Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.

Can I search Chrysler and Force parts by OEM part number?

Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.

Do Chrysler and Force outboard parts interchange?

Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.

Do you carry parts for older Force outboards?

Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.

Do you carry Chrysler outboard engine rebuild parts?

Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.

What Chrysler and Force parts are commonly replaced during maintenance?

Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.

Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

← Back to Outboard

|◀ ◀ 397 - 408 of 999 ▶ ▶|
View:
Mercruiser MC-I, R,MR/Apha Mercury Force 40hp & Up
Item#:
9857P
Cross Reference#:
18-9857
18-9857
56775
56775T
61067A04
61067A04
61067A1
61067A1
61067A2
61067A2
90210
90210
Manufacturer Item:
56775T
Manufacturer:
GLM
Available:
In Stock
Your Price:
222.17
Each
Replacement Shift Shaft Seal for Yamaha, Mercury & Honda Outboards

Pro Marine Shift Shaft Seal

Yamaha, Mercury & Honda Shift Shaft Seal Replacement

This Pro Marine replacement shift shaft seal is used on select Yamaha, Mercury, and Honda outboard lower units. It helps seal the shift shaft area to prevent water intrusion and gear lubricant leakage.

Designed as a replacement for Yamaha, Mercury, Honda, Sierra, Mallory, and GLM cross-reference numbers, this seal is commonly used during lower unit reseal, shift shaft service, and gearcase repair.

Compatible Applications

Brand Engine Range Engine Type Application Notes
Yamaha 40HP-250HP 2-Stroke 1984-Up select models
Yamaha F30-F300 FourStroke 1995-Up select models
Yamaha SHO VF90-VF250 FourStroke SHO 2010-Up select models
Mercury 50HP-450HP 3-Cylinder, 4-Cylinder, V6, V8 Select outboard applications
Honda 75HP-90HP FourStroke 1997-1998 select models
Fitment Note: This shift shaft seal fits many Yamaha, Mercury, and Honda applications, but exact fitment depends on engine model, year, serial number, and gearcase configuration. Always verify your OEM part number before ordering.

Compatible Shift Shaft Seal Carrier

This seal is used with the Pro Marine 25 inch Yamaha shift shaft seal carrier:

View Pro Marine 25 Inch Shift Shaft Seal Carrier

Replacing the seal when servicing the carrier is recommended to help maintain proper lower unit sealing.

OEM & Aftermarket Cross Reference Numbers

Brand / Type Part Numbers
Yamaha 93106-09014-00
Mercury / Quicksilver 8M0204708, 816461, 816464, 8164641, 82257M, 916464
Honda 91253-ZW1-003
GLM / Aftermarket 85223, 85581

What This Shift Shaft Seal is Used For

This shift shaft seal is installed in the lower unit to seal around the shift shaft where it passes through the gearcase housing or seal carrier.

A properly sealing shift shaft seal helps keep water out of the lower unit and helps keep gear lubricant inside the gearcase during operation.

Shift shaft seals are commonly replaced during lower unit resealing, water intrusion repair, shift shaft service, or complete gearcase rebuilds.

Replacing worn, hardened, or leaking seals can help protect internal gears, bearings, and shafts from water-contaminated gear lube.

Key Features and Benefits

  • Pro Marine aftermarket replacement shift shaft seal
  • Fits select Yamaha, Mercury, and Honda outboards
  • Direct replacement for Yamaha OEM 93106-09014-00
  • Cross references to Mercury 8M0204708, 816461, 816464, 8164641, and 82257M
  • Cross references to Honda 91253-ZW1-003
  • Helps prevent water intrusion into the lower unit
  • Helps prevent gear lubricant leakage
  • Common replacement during lower unit reseal service

Shift Shaft Seal Details

  • Brand: Pro Marine
  • Part Type: Shift Shaft Seal
  • Pro Marine Item Number: 7620
  • Manufacturer Item: 93106-09014-00
  • Application: Select Yamaha, Mercury, and Honda outboard lower units
  • System: Lower Unit / Gearcase
  • Use: Shift shaft sealing
  • Associated Carrier: 65N-45321-00-00

FAQ

What engines does this shift shaft seal fit?
This seal fits select Yamaha 40HP-250HP 2-stroke models, Yamaha F30-F300 four stroke models, Yamaha VF90-VF250 SHO models, Mercury 50HP-450HP outboards, and Honda 75HP-90HP applications.

Is this a genuine OEM seal?
No. This is a Pro Marine aftermarket replacement seal designed to replace multiple OEM and aftermarket part numbers.

What Yamaha OEM number does this replace?
This seal replaces Yamaha OEM part number 93106-09014-00.

What Mercury part numbers does this replace?
This seal cross references to Mercury and Quicksilver part numbers 8M0204708, 816461, 816464, 8164641, 82257M, and 916464.

Should I replace this seal when replacing the shift shaft seal carrier?
Yes. Replacing the seal during carrier service is recommended to help prevent leaks and water intrusion.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

7620, 93106-09014-00, 8M0204708, 816461, 816464, 8164641, 82257M, 85223, 85581, 91253-ZW1-003, 916464, Yamaha shift shaft seal, Mercury shift shaft seal, Honda shift shaft seal, Yamaha lower unit seal, Mercury lower unit seal, Honda lower unit seal, Pro Marine shift shaft seal, 65N-45321-00-00, Yamaha 25 inch seal carrier, lower unit reseal parts

Item#:
7620
Cross Reference#:
18-0267
18-2054
18-8347
508481
76384
8M0204708
816461
816464
8164641
82257M
85223
85581
9-76116
9-76117
9-76423
91253-ZW1-003
916464
93106-09014-00
Manufacturer Item:
93106-09014-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.55
Each
Mercury 115-225 Force 90-120 Alpha I, Gen II, Verado
Item#:
1117P
Cross Reference#:
F694057
42647
42647A1
Manufacturer Item:
42647A1
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
37.95
Each
Yamalube 10W30
Item#:
FC1030
Cross Reference#:
ACC-Y4M10-30-04
LUB-10W30-FC-04
LUB10W30FC04
Manufacturer Item:
LUB-10W30-FC-04
Manufacturer:
Yamaha Outboard
Available:
In Stock
 
Refrigerated Shipping
38.4900
Your Price:
37.13
1 GALLON
Yamalube 10W30
Item#:
FC1030QT
Cross Reference#:
ACC-Y4M10-30-12
LUB-10W30-FC-12
Manufacturer Item:
LUB-10W30-FC-12
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
11.49
1 QUART
Yamaha 5W30 Full Synthetic
Item#:
LUB-05W30-FC-04
Cross Reference#:
LUB-05W30-FC-04
Manufacturer Item:
LUB-05W30-FC-04
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
64.95
Each
Item#:
8M0078622
Cross Reference#:
8M0061368
8M0078622
8M0078629
8M0078635
8M0078641
857492A1
857494A1
858052KC1
858052K01
858052QB1
858052QC1
858052Q01
858055KC1
858055K01
858055QB1
858055QC1
858055Q01
858087KC1
858087K01
858087Q01
883722K01
883722Q01
883724K01
883724Q01
Manufacturer Item:
8M0078622
Manufacturer:
Quicksilver
Available:
In Stock
Your Price:
21.99
Each
Item#:
8M0078623
Cross Reference#:
8M0051369
8M0061369
8M0061369
8M0061424
8M0078623
8M0078630
8M0078636
8M0078642
8M051369
8401661
845282
8452821
857493A01
857493A1
857495A01
857495A1
858053KC1
858053K01
858053QB1
858053QC1
858053Q01
858056KC1
858056K01
858056QB1
858056QC1
858056Q01
858088KC1
858088K01
858088Q01
883723K01
883723Q01
883725K01
883725Q01
Manufacturer Item:
8M0078623
Manufacturer:
Quicksilver
Available:
In Stock
Your Price:
71.19
Each
Complete High-Performance Outboard Steering System No Hoses

Complete Hydraulic Steering System

Pro Marine 350-HSTEER Hydraulic Steering System

Built for single outboard boats up to 350HP, the Pro Marine 350-HSTEER system delivers smooth steering response, better control, and reliable performance for modern high-horsepower outboards.

Includes: steering cylinder, helm pump, 2 bottles of hydraulic fluid, and fill hose assembly.
Hydraulic hoses sold separately so you can choose the correct hose length for your boat and rigging layout.

What Is Included

Steering Cylinder

Front-mount hydraulic steering cylinder built for high-horsepower outboard control and smooth steering response.

View 350-HSTEER-CYL

Helm Pump

Hydraulic helm pump that converts steering wheel input into hydraulic steering movement.

View 350-HELM-025

Hydraulic Fluid

Includes two bottles of Pro Marine hydraulic steering fluid.

View PRO-OIL15

Fill Hose Assembly

Makes filling and bleeding the hydraulic steering system easier during installation and service.

View 102P Fill Hose
Pro Tip: Hose length depends on your boat, jack plate, setback, and rigging route. That is why hoses are sold separately.

Read our 350-HSTEER Steering Comparison & Pro Tips Guide

Best Applications

Boat / Setup Why It Works Well
Single Outboards up to 350HP Built for modern high-horsepower steering loads
Bass Boats Responsive steering feel and better control at speed
Bay Boats Smooth handling in shallow and open water
Center Consoles Reliable steering control for offshore and coastal use
Repowers Excellent upgrade from traditional cable steering

Complete Your Steering Setup

Key Benefits

  • Designed for single outboards up to 350HP
  • Smooth hydraulic steering response
  • Reduced steering effort compared to cable systems
  • Improves handling and control at higher speeds
  • Excellent for bass boats, bay boats, and center consoles
  • Flexible hose routing for cleaner rigging installations

FAQ

Does this steering system include hoses?
No. Hydraulic hoses are sold separately so you can choose the correct hose length for your setup.

What horsepower is this system rated for?
The 350-HSTEER system is designed for single outboard applications up to 350HP.

What comes in the kit?
The kit includes the steering cylinder, helm pump, two bottles of hydraulic steering fluid, and fill hose assembly.

What boats is this system commonly used on?
It is commonly used on bass boats, bay boats, center consoles, repower projects, and performance outboard setups.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-HSTEER, Pro Marine hydraulic steering system, hydraulic steering kit, hydraulic steering up to 350HP, outboard steering system, bass boat hydraulic steering, bay boat steering system, offshore hydraulic steering, steering helm and cylinder kit

Item#:
350-HSTEER
Manufacturer:
Pro Marine
Available:
In Stock
 
Oversized Shipping
Your Price:
1044.00
Each
Universal PF 3/8 - UNF 9/16
Item#:
9153
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
72.05
TWO FITTINGS
Wiseco 4-Stroke 94.50mm Bore
Item#:
9450XX
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
35.09
Each
Item#:
2STRK104
Cross Reference#:
ACC-Y2MTC-W3-04
LUB-2STRK-M1-04
LUB-2STRK-2M-04
Manufacturer Item:
LUB-2STRK-M1-04
Manufacturer:
Yamaha Outboard
Available:
In Stock
Your Price:
48.95
Each
|◀ ◀ 397 - 408 of 999 ▶ ▶|
View: