Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Chrysler & Force Outboard Parts

Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.

Shop Chrysler / Force Outboard Parts by System

Find the Correct Chrysler or Force Outboard Part

Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.

Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.

Use Our OEM Parts Lookup »

Common Chrysler & Force Outboard Engine Families

Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.

  • Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
  • Midrange: popular 35HP through 85HP applications across multiple engine generations
  • Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
  • High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
  • Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications

Common Chrysler & Force Repair and Rebuild Problems

  • No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
  • Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
  • Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
  • Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
  • Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
  • Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.

Repair Individual Systems or Build Your Own Rebuild

Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.

Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.

Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?

  • Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
  • Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
  • Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of rebuild and replacement components for older outboard engines.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Chrysler or Force outboard part?

Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.

Can I search Chrysler and Force parts by OEM part number?

Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.

Do Chrysler and Force outboard parts interchange?

Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.

Do you carry parts for older Force outboards?

Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.

Do you carry Chrysler outboard engine rebuild parts?

Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.

What Chrysler and Force parts are commonly replaced during maintenance?

Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.

Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

← Back to Outboard

|◀ ◀ 421 - 432 of 999 ▶ ▶|
View:
Bore Size 3.494
Item#:
3494KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.559"
Item#:
2559CD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
30cc Tilt Hydraulic Steering Helm Pump for Pro Marine, SeaStar & Uflex Styl

30cc Tilt Hydraulic Steering Helm Pump

Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump

The Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump is a 30cc tilt hydraulic steering helm designed for smooth, responsive steering control while allowing adjustable steering wheel positioning for improved driver comfort.

This Pro Marine tilt helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.

What a 30cc Tilt Helm Pump Does

The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.

A 30cc tilt helm moves more fluid per steering wheel turn than smaller helms while also allowing the steering wheel angle to be adjusted for improved comfort and driving position.

Pro Tip: Tilt helms are popular on center consoles, bay boats, and performance boats where the driver wants adjustable steering wheel positioning for standing or seated operation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Single Outboards up to 350HP Hydraulic steering helm applications requiring adjustable tilt positioning
Center Console Boats Improved comfort for seated and standing driving positions
Bay Boats Responsive steering with adjustable helm angle
Offshore Boats Comfortable steering position for long-distance operation
Performance Setups Useful where responsive steering and driver comfort are important

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Steering Cylinder

Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.

View 350-HSTEER-CYL Cylinder

Hydraulic Hoses

Choose the correct hose length for your boat, jack plate, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

Fluid & Fill Accessories

Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.

View PRO-OIL15 Hydraulic Fluid
View 102P Fill Hose Assembly

Key Features and Benefits

  • 30cc tilt hydraulic helm pump design
  • 1.83 cubic inches per revolution hydraulic displacement
  • Adjustable tilt steering position for improved comfort
  • Can provide quicker steering response when properly matched
  • Designed for the Pro Marine 350-HSTEER hydraulic steering system
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Good choice for center consoles and performance boats
  • Helps reduce steering effort compared to cable steering

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Tilt hydraulic helm pump
  • Helm Size: 30cc
  • Displacement: 1.83 cu in/rev
  • Connection Type: Hydraulic steering hose circuit
  • Tilt Feature: Adjustable steering wheel angle
  • Typical Use: Single outboard hydraulic steering systems
  • Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
  • Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit

FAQ

What does a tilt hydraulic helm do?
A tilt helm allows the steering wheel angle to be adjusted while also providing hydraulic steering control for the outboard engine.

What is the advantage of a tilt helm?
Tilt helms improve driver comfort by allowing the wheel position to be adjusted for seated or standing operation.

What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.

Is this the complete steering system?
No. This listing is for the tilt helm pump only.

Can this helm be used on center console boats?
Yes. Tilt helms are especially popular on center console boats where adjustable steering wheel positioning improves comfort and visibility.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-THELM-030, tilt hydraulic helm pump, 30cc tilt helm, Pro Marine tilt helm, 1.83 cu in helm pump, SeaStar compatible tilt helm, Uflex compatible tilt helm, hydraulic steering tilt helm, adjustable tilt steering helm, outboard steering helm, 350-HSTEER tilt helm

Item#:
350-THELM-030
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
877.20
Each
Bore Size 3.685
Item#:
3685KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
52.95
Each
Bore Size 2.786
Item#:
2786CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 2.618
Item#:
2618CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.268
Item#:
3268KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.605
Item#:
2605KD
Manufacturer:
Wiseco
Available:
Special Order
Your Price:
39.63
Each
Bore Size 2.595
Item#:
2595KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 3.268
Item#:
3268TD
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
54.95
Each
For Twin 350-Hsteer cylinders
Item#:
350-TIEBAR-D
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
296.49
Each
Bore Size 2.894
Item#:
2894CD
Manufacturer:
Wiseco
Available:
Out of Stock
50.7800
Your Price:
49.95
Each
|◀ ◀ 421 - 432 of 999 ▶ ▶|
View: