S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Chrysler & Force Outboard Parts
Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.
Shop Chrysler / Force Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints for Lower Unit and Engine
- Service Manuals
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Chrysler or Force Outboard Part
Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.
Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.
Use Our OEM Parts Lookup »Common Chrysler & Force Outboard Engine Families
Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.
- Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
- Midrange: popular 35HP through 85HP applications across multiple engine generations
- Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
- High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
- Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications
Common Chrysler & Force Repair and Rebuild Problems
- No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
- Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
- Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
- Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
- Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
- Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.
Repair Individual Systems or Build Your Own Rebuild
Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.
Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.
Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?
- Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
- Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
- Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of rebuild and replacement components for older outboard engines.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Chrysler or Force outboard part?
Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.
Can I search Chrysler and Force parts by OEM part number?
Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.
Do Chrysler and Force outboard parts interchange?
Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.
Do you carry parts for older Force outboards?
Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.
Do you carry Chrysler outboard engine rebuild parts?
Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.
What Chrysler and Force parts are commonly replaced during maintenance?
Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.
Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
3Y9022340
3Y9022340M
52444
52456
52456A1
55501
55501A1
57250
57250A1
60494
60494A1
60494A4
60494A5
604941
802893
802893A4
802893Q
802893Q01
802893Q4
802893T
805269
805269A4
8052691
806771
807172
807172A4
9-37800
9999937801
9999937851
9999937851M
55481
89876
89876A3
9-37855
MAR-FLTHD-10-BK
55481
89876
89876A3
9-37855
9-37862
Sierra Marine Fuel / Water Separator Filter
Sierra 18-7920 Fuel / Water Separator - 10 Micron - 1"-12 Thread
The Sierra 18-7920 Fuel / Water Separator is a 10-micron spin-on replacement filter designed for universal marine fuel filtration applications using a 1"-12 thread.
This filter uses the large center-hole configuration and is designed to help remove water and fine contaminants from the fuel supply before they reach the engine.
Sierra 18-7920 cross references popular Mercury, Johnson / Evinrude, OMC, Racor and Fram fuel / water separator numbers listed below.
Thread: 1"-12
Filtration: 10 Micron
Style: Spin-On Replacement
Application: Universal Marine
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Sierra |
| Sierra Part Number | 18-7920 |
| Filter Type | Fuel / Water Separator |
| Filtration Rating | 10 Micron |
| Thread Pitch | 1"-12 |
| Configuration | Large Center Hole |
| Replacement Style | Spin-On |
| Application | Universal Marine |
OEM & Cross Reference Numbers
| Manufacturer / Brand | Part Number |
|---|---|
| Sierra | 18-7920 |
| Fram | CH33APL |
| Johnson / Evinrude Outboard | 771839 |
| Mercury Marine | 35-809099 |
| OMC Stern Drive | 771839 |
| Racor | B32014 |
| Racor | S3214 |
Universal Marine Application
Sierra 18-7920 is a universal replacement fuel / water separator filter for compatible marine filter heads using a 1"-12 threaded filter.
Because this filter is used across multiple marine engine brands and fuel systems, fitment should be determined by the filter-head thread and the existing filter cross-reference number rather than by engine horsepower alone.
This is the large-hole 1"-12 thread style fuel / water separator.
Compare your existing filter number and filter-head thread before ordering. Marine fuel separator filters may look very similar while using different center-hole sizes or thread pitches.
What a Fuel / Water Separator Does
A marine fuel / water separator helps protect the engine fuel system by removing water and particulate contamination before the fuel reaches the engine.
Water can enter a marine fuel system through condensation, contaminated fuel or moisture in the tank. The separator provides an additional stage of filtration before the engine-mounted fuel filter or fuel injection system.
10-Micron Filtration
The Sierra 18-7920 is rated at 10 microns, allowing it to capture fine fuel contaminants while separating water from the fuel supply.
Maintaining a clean fuel / water separator can help reduce the chance of restricted fuel flow and contamination reaching carburetors, fuel pumps or fuel injection components.
When Should a Fuel / Water Separator Be Replaced?
Replacement intervals vary based on engine use, fuel quality and operating conditions. Fuel / water separator filters should be inspected and replaced as part of regular marine engine maintenance.
Replacement should also be considered whenever contaminated fuel or water in the fuel system is suspected.
Common Reasons for Replacement
- Routine annual or seasonal maintenance
- Water found in the fuel system
- Contaminated or stale fuel
- Restricted fuel flow
- Engine fuel starvation symptoms
- Unknown age of the existing fuel separator
- Replacing Fram CH33APL
- Replacing Johnson / Evinrude or OMC 771839
- Replacing Mercury 35-809099
- Replacing Racor B32014 or S3214
Installation Notes
Confirm that the filter head uses the correct 1"-12 thread before installation.
Follow the engine or filter-head manufacturer's installation procedure. Inspect the filter-head sealing surface and make sure the old filter gasket has been completely removed before installing the replacement.
Key Features and Benefits
- Sierra marine replacement fuel / water separator
- Sierra part number 18-7920
- 10-micron filtration rating
- 1"-12 thread pitch
- Large center-hole configuration
- Spin-on replacement design
- Universal marine application
- Replaces Fram CH33APL
- Replaces Johnson / Evinrude 771839
- Replaces OMC 771839
- Replaces Mercury 35-809099
- Replaces Racor B32014
- Replaces Racor S3214
- Helps remove water and contaminants from marine fuel
FAQ
What is the micron rating of Sierra 18-7920?
The Sierra 18-7920 is a 10-micron fuel / water separator.
What thread does Sierra 18-7920 use?
It uses a 1"-12 thread.
Is this the large-hole fuel / water separator?
Yes. Sierra 18-7920 is the large center-hole configuration.
Is Sierra 18-7920 a spin-on filter?
Yes. It is a spin-on replacement fuel / water separator.
What Mercury filter does Sierra 18-7920 replace?
It cross references Mercury Marine 35-809099.
What Johnson / Evinrude or OMC number does it replace?
It replaces 771839.
What Racor filters does it replace?
It cross references Racor B32014 and S3214.
What Fram filter does it replace?
It cross references Fram CH33APL.
Is this filter engine-specific?
No. It has a universal marine application for compatible
filter heads using the correct 1"-12 thread.
How do I know if this filter fits my boat?
Compare the existing filter part number and verify that your filter head
uses a 1"-12 thread. Cross-reference numbers are listed above.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help verifying the correct fuel separator?
Contact Pro Marine
Phone: 941-721-3000
Searchable Terms
18-7920, Sierra 18-7920, Sierra fuel water separator, Sierra water separator filter, marine fuel water separator, marine fuel filter, 10 micron fuel filter, 10 micron water separator, 1-12 fuel filter, 1 inch 12 thread fuel filter, large hole fuel water separator, spin on marine fuel filter, universal marine fuel separator, CH33APL, Fram CH33APL, 771839, Evinrude 771839, Johnson 771839, OMC 771839, 35-809099, Mercury 35-809099, Mercury fuel water separator, B32014, Racor B32014, S3214, Racor S3214, boat fuel water separator, outboard fuel separator, sterndrive fuel separator
0002507
0771839
18-7920
MAR-FLTHD-10-BK
9-37862
0360941
0398319
0435918
0765595
0777715
18-7831
18-7831
311679
360941
398319
40165
765595
777715
802128A1