S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Chrysler & Force Outboard Parts
Shop OEM and aftermarket Chrysler and Force outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical and ignition, internal engine components, lower unit parts, steering, trim, and routine service items.
Pro Marine USA carries replacement parts for a wide range of Chrysler and Force outboards, including older carbureted 2-stroke platforms used across many horsepower ranges. Use your engine horsepower, model number, serial number, production year, or OEM part number whenever possible to confirm fitment before ordering.
Shop Chrysler / Force Outboard Parts by System
- Control Cables and Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel and Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints for Lower Unit and Engine
- Service Manuals
- Steering Systems
- Transom and Midsection
- Trim System
Find the Correct Chrysler or Force Outboard Part
Chrysler and Force outboard parts can vary by horsepower, model number, production year, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram when available.
Once you have the OEM part number, search Pro Marine to locate available replacement and aftermarket options.
Use Our OEM Parts Lookup »Common Chrysler & Force Outboard Engine Families
Pro Marine supports many older Chrysler and Force outboards across a wide horsepower range. These engines span several generations and manufacturers, so model and production information are especially important when identifying parts.
- Small Outboards: common Chrysler and Force portable and low-horsepower 2-stroke engines
- Midrange: popular 35HP through 85HP applications across multiple engine generations
- Three- and Four-Cylinder: common Force 70HP, 75HP, 85HP, 90HP, 120HP, and related platforms
- High-Horsepower: Force 120HP, 125HP, 150HP, and related larger-displacement engines
- Carbureted 2-Stroke: the primary platform used across most Chrysler and Force outboard applications
Common Chrysler & Force Repair and Rebuild Problems
- No start or weak spark: inspect ignition packs, coils, stators, trigger components, wiring, grounds, and related electrical parts.
- Engine overheating: inspect the water pump, impeller, thermostat where applicable, cooling passages, and related cooling components.
- Hard starting, bogging, or fuel starvation: inspect the fuel pump, carburetors, fuel lines, filters, reeds, and intake components.
- Low compression or poor power: inspect pistons, rings, cylinders, bearings, gaskets, reeds, and internal engine components.
- Lower unit noise or milky gear lube: inspect gears, bearings, shafts, prop shaft seals, driveshaft seals, shift shaft seals, and gear lube condition.
- Trim or steering problems: inspect trim motors, pumps, hydraulic components, steering systems, cables, and related rigging parts.
Repair Individual Systems or Build Your Own Rebuild
Many Chrysler and Force owners and marine rebuilders prefer to select individual components instead of purchasing a pre-built engine kit. Use the system categories above to choose the pistons, rings, bearings, gaskets, cooling parts, ignition components, fuel-system parts, and lower-unit components needed for your specific repair.
Always match parts to the exact horsepower, model, production year, and original component whenever possible because Chrysler and Force engines may use different parts within similar horsepower ranges.
Why Buy Chrysler & Force Outboard Parts from Pro Marine USA?
- Aftermarket and replacement parts for many older Chrysler and Force outboard applications.
- Parts for maintenance, professional repair, engine rebuilding, lower units, fuel systems, ignition systems, steering, and trim.
- Part-number and diagram lookup tools to help identify the correct component when OEM information is available.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of rebuild and replacement components for older outboard engines.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Chrysler or Force outboard part?
Start with the engine horsepower, model number, production year, serial information, and any part numbers found on the original component. Older Chrysler and Force applications can vary significantly between engine families, so complete engine identification is important.
Can I search Chrysler and Force parts by OEM part number?
Yes. If you have the original OEM or replacement part number, enter it into the Pro Marine site search to locate available replacement options. You can also use the OEM parts lookup when diagram information is available for your application.
Do Chrysler and Force outboard parts interchange?
Some Chrysler and Force engines share related designs and components, but interchange should never be assumed. Parts may vary by horsepower, engine family, model year, and production range.
Do you carry parts for older Force outboards?
Yes. Pro Marine carries many replacement and rebuild parts for older Force outboards, including cooling, ignition, fuel, internal engine, lower unit, steering, and trim components.
Do you carry Chrysler outboard engine rebuild parts?
Yes. Available rebuild components may include pistons, rings, bearings, gaskets, seals, internal engine parts, cooling components, fuel-system parts, and ignition components depending on the engine application.
What Chrysler and Force parts are commonly replaced during maintenance?
Common service items include spark plugs, fuel-system components, water pump impellers, water pump parts, gear lube, lower-unit seals, ignition components, and other model-specific maintenance items.
Fitment Tip: Chrysler and Force outboard parts can vary substantially by horsepower, model, production year, and engine family. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
MPI Type B Marine Fuel Hose
MPI 3/8" Marine Fuel Hose - Type B - Sold by the Foot
The MPI 375 3/8" Fuel Hose is bulk marine fuel line designed for applications using 3/8" inside-diameter hose. It is sold by the foot so you can purchase the continuous length needed for your boat or outboard fuel-system installation.
This is the Type B version, commonly used in exposed and above-deck marine fuel-line applications where Type B hose is appropriate.
Pro Marine also stocks the matching Oetiker 4-185 ear clamp, Pro Marine 8005 3/8" primer bulb, Oetiker installation tools and a 3/8" Type A alternative.
Inside Diameter: 3/8"
Manufacturer: MPI Products
Fuel Hose Type: Type B Marine Fuel Hose
Sold: By the Foot
Recommended Clamp: Oetiker 4-185
Recommended Primer Bulb: Pro Marine 8005 - 3/8"
How to Order Bulk Fuel Hose
This hose is sold by the foot. Enter the quantity based on the total continuous length required for your installation.
For example, if you need 8 feet of fuel hose, order a quantity of 8.
Type B Marine Fuel Hose
Type B marine fuel hose is commonly used in exposed or above-deck fuel-system applications where that hose classification is appropriate.
Type B hose does not carry the same additional fire-test classification associated with Type A marine fuel hose. If the installation requires Type A hose, use the 3/8" Type A option linked below.
For installations requiring the additional Type A fire-resistant classification, use the 3/8" Type A marine fuel hose.
View 3/8" Type A Marine Fuel Hose
Complete Your 3/8" Fuel Line Setup
Pro Marine stocks the correct clamp, primer bulb and installation tools needed to build or service a 3/8" marine fuel-line assembly.
Oetiker 4-185 Ear Clamp - 10 Pack
Matching Oetiker ear clamp for this 3/8" Type B hose. This same clamp is also used with the 3/8" Type A hose listed below.
Clamp: 4-185
View Oetiker 4-185 Clamp
Pro Marine 8005 - 3/8" Primer Bulb
Matching 3/8" primer bulb for building or repairing marine outboard fuel-line assemblies using 3/8" fuel hose.
Hose Size: 3/8"
View 3/8" Primer Bulb
Oetiker Standard Jaw Pincer Tool
Installation tool for properly closing Oetiker ear clamps on marine fuel-line connections.
View Oetiker Pincer Tool
Oetiker Clamp Pack with Tool
Complete assortment of commonly used Oetiker clamp sizes with the installation tool included. A convenient setup for marine shops, technicians and customers servicing multiple hose sizes.
View Oetiker Clamp Pack3/8" Type A Alternative
3/8" Type A Marine Fuel Hose - 375-1
Use the Type A version when the installation requires the additional Type A fire-resistant marine fuel-hose classification.
Inside Diameter: 3/8"
Fuel Hose Type: Type A
Matching Clamp: Oetiker 4-185
Primer Bulb: Pro Marine 8005 - 3/8"
3/8" Type A vs. Type B Fuel Hose
| Fuel Hose | Classification | Matching Clamp | Primer Bulb |
|---|---|---|---|
| 375 | Type B | Oetiker 4-185 | Pro Marine 8005 - 3/8" |
| 375-1 | Type A | Oetiker 4-185 | Pro Marine 8005 - 3/8" |
Same Clamp for Both 3/8" Fuel Hoses
Unlike some of the smaller fuel-hose sizes, both of these 3/8" fuel-line options use the same Oetiker 4-185 clamp.
That means the clamp selection stays the same whether you choose the Type A or Type B 3/8" hose. The main decision between the two hoses is the required marine fuel-hose classification for the installation.
What This Fuel Hose is Used For
The 375 3/8" Type B fuel hose is used for building, repairing or replacing marine fuel lines where 3/8" hose and Type B construction are appropriate.
Bulk hose sold by the foot makes it possible to build the required length and pair it with the correct primer bulb, fittings and clamps for the specific boat and engine installation.
Building a 3/8" Outboard Fuel Line
Depending on the application, a complete 3/8" fuel-line setup may include:
- 3/8" Type B marine fuel hose
- Pro Marine 8005 3/8" primer bulb
- Correct tank-side fitting or connector
- Correct engine-side fitting or connector
- Oetiker 4-185 ear clamps
- Oetiker pincer installation tool
Primer Bulb Selection
Primer bulb fittings should match the inside diameter of the fuel hose. For 3/8" fuel line, use the Pro Marine 8005 3/8" Primer Bulb.
View Pro Marine 8005 3/8" Primer Bulb
Key Features & Benefits
- 3/8" inside diameter
- Marine Type B fuel hose
- Commonly used for exposed and above-deck installations where Type B hose is appropriate
- Sold by the foot for custom-length installations
- Uses Oetiker 4-185 ear clamp
- Matching Pro Marine 8005 3/8" primer bulb available
- 3/8" Type A alternative available
- Type A and Type B hoses both use the same 4-185 clamp
- Oetiker pincer installation tool available
- Complete Oetiker clamp assortment with tool available
Need Help Choosing the Right Marine Fuel Hose?
Fuel-hose diameter is only one part of choosing the correct line. Installation location, Type A or Type B classification, primer bulb size, fittings and clamp selection should all be considered.
Visit the Pro Marine Fuel Line Technical Center
FAQ
What size is this fuel hose?
This hose has a 3/8" inside diameter.
Is this fuel hose sold by the foot?
Yes. Order the quantity corresponding to the total number of feet needed.
What type of marine fuel hose is this?
This is Type B marine fuel hose.
Which clamp fits this 3/8" Type B hose?
Use the
Oetiker 4-185 ear clamp
.
Which primer bulb fits this hose?
Use the
Pro Marine 8005 3/8" Primer Bulb
.
What if I need 3/8" Type A fuel hose?
Use the
375-1 3/8" Type A Marine Fuel Hose
.
Does the 3/8" Type A hose use the same clamp?
Yes. Both the Type A and Type B 3/8" hoses use the
Oetiker 4-185 ear clamp.
Can I use the same primer bulb with the Type A hose?
Yes. Both hoses have a 3/8" inside diameter, so the
Pro Marine 8005 3/8" primer bulb is the matching size
for either hose.
What tool installs the Oetiker clamps?
Use the
Oetiker Standard Jaw Pincer Tool
.
Do you sell a complete clamp assortment?
Yes. The
Oetiker Clamp Pack with Tool
includes commonly used clamp sizes and the installation tool.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help choosing the correct fuel-line parts?
Contact Pro Marine
Phone: 941-721-3000
Searchable Part Numbers & Terms
375, MPI 375, 3/8 fuel hose, 3/8 marine fuel hose, 3/8 boat fuel line, 3/8 outboard fuel hose, Type B marine fuel hose, Type B fuel line, marine fuel line by the foot, bulk marine fuel hose, above deck fuel hose, Oetiker 4-185, 4-185 fuel hose clamp, 8005, Pro Marine 8005, 3/8 primer bulb, marine primer bulb, outboard primer bulb, 375-1, 3/8 Type A fuel hose, marine fuel hose, outboard fuel line, boat fuel hose
0173311
0303665
0387121
0777353
173311
18-8055
39729334301
777353
9-38016