S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Pro Marine Verado Steering Cylinder Seal Kit
Hydraulic Steering Cylinder Reseal Kit for Mercury Verado Systems
This Pro Marine steering cylinder seal kit is an aftermarket replacement kit for select Mercury Verado hydraulic steering cylinder assemblies.
The kit includes the seals and O-rings commonly required to reseal compatible Verado steering cylinders during steering system service and repair.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Mercury Verado 135-400HP | FourStroke | Hydraulic Steering | Used in compatible Mercury Verado steering cylinder assemblies |
| Mercury L6 Verado Models | Supercharged FourStroke | Hydraulic Steering | Used in compatible integrated steering systems |
| Mercury V8 / V10 Verado Models | FourStroke | Hydraulic Steering | Used in compatible Verado steering cylinder assemblies |
Always verify your Mercury model, serial number, and steering cylinder diagram before ordering hydraulic steering seals and components.
OEM Part Numbers & Cross References
| Brand / Type | Part Number |
|---|---|
| Pro Marine | 2700P |
| Replaces Mercury OEM | 896173A01 |
| Replaces Mercury OEM | 8M0045604 |
Related Steering Cylinder Seal
Need the steering cylinder attachment seal used when reinstalling the steering cylinder to the engine? See the Pro Marine Steering Cylinder Seal .
What This Steering Cylinder Seal Kit is Used For
This Pro Marine steering cylinder seal kit is used to reseal compatible Mercury Verado hydraulic steering cylinder assemblies.
The kit includes multiple hydraulic seals and O-rings commonly replaced during steering cylinder repair and hydraulic steering service.
Worn or damaged steering cylinder seals may allow hydraulic fluid leakage, steering pressure loss, or reduced steering performance.
Replacing steering cylinder seals during service helps maintain proper hydraulic steering operation and reduce fluid leakage.
Key Features and Benefits
- Pro Marine aftermarket steering cylinder seal kit
- Replaces Mercury OEM seal kits 896173A01 and 8M0045604
- Fits select Mercury Verado hydraulic steering systems
- Includes seals and O-rings commonly needed for steering cylinder reseal service
- Helps maintain hydraulic steering pressure
- Helps reduce steering fluid leakage
- Common service kit for Verado steering cylinder repair
- Aftermarket alternative to OEM Mercury steering seal kits
Steering Cylinder Seal Kit Details
- Brand: Pro Marine
- Part Type: Steering Cylinder Seal Kit
- Pro Marine Part Number: 2700P
- Replaces OEM: Mercury 896173A01 and 8M0045604
- Application: Mercury Verado Steering Cylinder Assemblies
- System: Hydraulic Steering System
- Use: Steering cylinder reseal service
- Quantity Sold: Kit
FAQ
What does Pro Marine 2700P fit?
This seal kit fits select Mercury Verado hydraulic steering cylinder assemblies using compatible steering system components.
What Mercury seal kits does this replace?
This Pro Marine kit replaces Mercury OEM seal kits 896173A01 and 8M0045604.
What is included in this kit?
The kit includes the seals and O-rings commonly required to reseal compatible Verado steering cylinders.
Can bad steering seals cause fluid leaks?
Yes. Worn or damaged steering cylinder seals may allow hydraulic steering fluid leakage and steering performance issues.
Do I still need the steering cylinder attachment seal?
Depending on the repair being performed, you may also need the steering cylinder seal used when reinstalling the steering cylinder to the engine.
Is this an OEM Mercury kit?
No. This is a Pro Marine aftermarket steering cylinder reseal kit designed as a replacement for compatible Mercury OEM kits.
Should I verify fitment before ordering?
Yes. Mercury used multiple steering cylinder configurations depending on model and production range, so serial number verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic steering components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
2700P, 896173A01, 8M0045604, Pro Marine steering seal kit, Verado steering cylinder seal kit, Mercury steering cylinder reseal kit, Mercury Verado steering kit, Verado hydraulic steering seal kit, Mercury steering cylinder rebuild kit, Mercury hydraulic steering repair, Verado steering ram seal kit, Mercury steering cylinder service kit, Verado steering cylinder reseal
8M0045604
896173A01
Mercury Verado Power Steering Helm
Mercury Verado 50cm Tilt Power Steering Helm
This OEM Mercury 50cm power steering helm is the tilt version for Mercury Verado power steering systems. It is used when the boat requires an adjustable steering wheel position instead of a fixed non-tilt helm.
Match your original helm number, steering setup, and cross-reference numbers before ordering. For Verado pump service, Gen A/B replacement and Gen C pump options are linked below, along with Pro Marine's Gen B to Gen C conversion walkthrough.
Compatible Applications
| System | Helm Type | Fitment Note |
|---|---|---|
| Mercury Verado power steering systems | 50cm tilt helm | Verify the current helm number, steering configuration, and OEM cross-reference before ordering. |
Important Fitment Note
This is the tilt Mercury Verado helm. If the boat uses a fixed steering wheel position and does not need tilt adjustment, order the Mercury Verado 50cm non-tilt helm, item 8M0137449.
OEM & Cross Reference Numbers
| Type | Part Numbers |
|---|---|
| Pro Marine Item Number | 8M0137451 |
| Mercury Manufacturer Item | 8M0137451 |
| Cross Reference Numbers | 8M0030273, 8M0134636, 8M0134637, 8M0134638, 8M0137451, 8M0151559, 892516A01, 892516A02, 892516K01, 892516K02, 892516K03, 892516K11, 892516K12, 892516K31, 892516K32, 892516K33, 892516K51, 892516K52, 892516K53 |
What This Part is Used For
The helm is the steering control unit mounted behind the steering wheel at the dash. This Mercury 8M0137451 helm is used when replacing the adjustable tilt helm in a compatible Verado power steering system.
If the steering system has been converted, repaired, or mixed with later-generation pump components, verify the helm, hose, pump, and harness requirements before ordering.
Related Verado Power Steering Parts
Helm Power Steering Std 50Cm
Mercury Verado 50cm standard non-tilt power steering helm. Order this version when the application requires a fixed steering wheel position.
Item #: 8M0137449
View Non-Tilt Helm
Power Steering Fluid
Mercury full synthetic power steering fluid for compatible Mercury and Verado power steering service.
Item #: 858077
View Power Steering Fluid
Mercury Verado Gen A/B Power Steering Pump Replacement
Pro Marine replacement pump for Gen A and Gen B Verado power steering systems. Cross references 8M0134359 and 8M0134736.
Item #: 8M0134736P
View Gen A/B Pump
Power Steering Pump
OEM Mercury Verado Gen C power steering pump. Pump only; hoses and conversion parts are sold separately when required.
Item #: 8M0199048
View Gen C PumpGen B to Gen C Conversion Help
If you are replacing a Verado power steering pump and need to identify whether your boat has a Gen A/B or Gen C system, review Pro Marine's conversion walkthrough before ordering pump, harness, hose, or steering components.
Read the Verado Gen B to Gen C Power Steering Conversion GuideKey Features and Benefits
- OEM Mercury Marine 50cm power steering helm.
- Tilt design allows adjustable steering wheel positioning.
- Fits Verado power steering systems when the original application calls for this tilt helm.
- Cross references common Mercury tilt helm numbers including 892516A01, 892516A02, 892516K31, and 892516K32.
- Related non-tilt helm, power steering fluid, Gen A/B pump, Gen C pump, and conversion guide are linked for easier steering system service planning.
Product Details
| Product | Helm Power Steering With Tilt |
| Application | Mercury Verado power steering systems |
| Manufacturer | Mercury Marine |
| OEM or Aftermarket | OEM |
| Helm Style | Tilt |
FAQ
Is this the tilt helm?
Yes. This is the Mercury Verado 50cm tilt power steering helm. For the non-tilt version, order item 8M0137449.
What does this helm fit?
This helm fits Verado power steering systems that require the 50cm tilt helm. Verify your original helm part number and steering configuration before ordering.
Which pump should I order with Verado steering service?
Identify the pump generation first. Pro Marine offers a Gen A/B replacement pump, item 8M0134736P, and an OEM Mercury Gen C pump, item 8M0199048. Use the Gen B to Gen C conversion walkthrough if you are planning an upgrade.
Is power steering fluid linked for this system?
Yes. Mercury full synthetic power steering fluid is available separately as item 858077.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Mercury Verado tilt power steering helm, Mercury Verado 50cm helm, adjustable Verado helm, OEM Mercury tilt helm, Verado hydraulic power steering helm, Verado Gen B to Gen C conversion, Verado Gen C pump, Verado Gen A B pump.
Searchable Part Numbers
8M0137451, 8M0030273, 8M0134636, 8M0134637, 8M0134638, 8M0151559, 892516A01, 892516A02, 892516K01, 892516K02, 892516K03, 892516K11, 892516K12, 892516K31, 892516K32, 892516K33, 892516K51, 892516K52, 892516K53, 8M0137449, 858077, 858077K01, 858002K01, 858077KC1, 8M0134736P, 8M0134736, 8M0134359, 8M0199048.
8M0134636
8M0134637
8M0134638
8M0137451
8M0151559
892516A01
892516A02
892516K01
892516K02
892516K03
892516K11
892516K12
892516K31
892516K32
892516K33
892516K51
892516K52
892516K53
880659T
896500A01
OEM Mercury Verado Steering Cylinder Seal Kit
Mercury Hydraulic Steering Cylinder Reseal Kit
This genuine OEM Mercury steering cylinder seal kit is used to reseal select Mercury Verado hydraulic steering cylinder assemblies.
The kit includes the seals and O-rings commonly required during steering cylinder repair and hydraulic steering system service.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Mercury Verado 135-400HP | FourStroke | Hydraulic Steering | Used in compatible Mercury Verado steering cylinder assemblies |
| Mercury L6 Verado Models | Supercharged FourStroke | Hydraulic Steering | Used in compatible integrated steering systems |
| Mercury V8 / V10 Verado Models | FourStroke | Hydraulic Steering | Used in compatible Verado steering cylinder assemblies |
Always verify your Mercury model, serial number, and steering cylinder diagram before ordering hydraulic steering seals and components.
OEM Part Numbers & Supersessions
| Brand | Part Number |
|---|---|
| Mercury OEM | 8M0045604 |
| Supersedes Mercury OEM | 896173A01 |
| Alternate Search Format | 8M0045604 |
Related Steering Cylinder Seal
Need the steering cylinder attachment seal used when reinstalling the steering cylinder to the engine? See the Pro Marine Steering Cylinder Seal .
Aftermarket Alternative
Looking for an aftermarket replacement option? See the Pro Marine Steering Cylinder Seal Kit .
What This Steering Cylinder Seal Kit is Used For
This Mercury steering cylinder seal kit is used to reseal compatible Verado hydraulic steering cylinder assemblies.
The kit includes multiple hydraulic seals and O-rings commonly replaced during steering cylinder repair and hydraulic steering system service.
Worn or damaged steering cylinder seals may allow hydraulic fluid leakage, steering pressure loss, or reduced steering performance.
Replacing steering cylinder seals during service helps maintain proper hydraulic steering operation and reduce fluid leakage.
Key Features and Benefits
- Genuine OEM Mercury steering cylinder seal kit
- Current Mercury OEM part number 8M0045604
- Supersedes Mercury OEM seal kit 896173A01
- Fits select Mercury Verado hydraulic steering systems
- Includes seals and O-rings commonly needed for steering cylinder reseal service
- Helps maintain hydraulic steering pressure
- Helps reduce steering fluid leakage
- OEM Mercury fit and material compatibility
Steering Cylinder Seal Kit Details
- Brand: Mercury
- Part Type: Steering Cylinder Seal Kit
- Current OEM Part Number: 8M0045604
- Supersedes OEM: 896173A01
- Application: Mercury Verado Steering Cylinder Assemblies
- System: Hydraulic Steering System
- Use: Steering cylinder reseal service
- Quantity Sold: Kit
FAQ
What does Mercury 8M0045604 fit?
This seal kit fits select Mercury Verado hydraulic steering cylinder assemblies using compatible steering system components.
Does this replace Mercury 896173A01?
Yes. Mercury OEM part number 8M0045604 supersedes older seal kit number 896173A01.
What is included in this kit?
The kit includes the seals and O-rings commonly required to reseal compatible Verado steering cylinders.
Can bad steering seals cause fluid leaks?
Yes. Worn or damaged steering cylinder seals may allow hydraulic steering fluid leakage and steering performance issues.
Do I still need the steering cylinder attachment seal?
Depending on the repair being performed, you may also need the steering cylinder seal used when reinstalling the steering cylinder to the engine.
Is there an aftermarket version available?
Yes. Pro Marine also offers an aftermarket steering cylinder reseal kit for compatible Verado steering systems.
Should I verify fitment before ordering?
Yes. Mercury used multiple steering cylinder configurations depending on model and production range, so serial number verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic steering components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0045604, 896173A01, Mercury steering cylinder seal kit, Mercury Verado steering seal kit, Mercury hydraulic steering kit, Verado steering cylinder reseal kit, Mercury steering rebuild kit, Mercury Verado seal kit, Verado hydraulic steering seal kit, Mercury steering ram seal kit, Mercury steering cylinder service kit, Verado steering repair kit
8M0045604
896173A01
892554A01
892554T
Mercury Verado Power Steering Helm
Mercury Verado 50cm Non-Tilt Power Steering Helm
This OEM Mercury 50cm power steering helm is the standard non-tilt helm for Mercury Verado power steering systems. It is used when the boat requires a fixed steering wheel position instead of an adjustable tilt helm.
Match your original helm number, steering setup, and cross-reference numbers before ordering. For Verado pump service, Gen A/B replacement and Gen C pump options are linked below, along with Pro Marine's Gen B to Gen C conversion walkthrough.
Compatible Applications
| System | Helm Type | Fitment Note |
|---|---|---|
| Mercury Verado power steering systems | 50cm standard non-tilt helm | Verify the current helm number, steering configuration, and OEM cross-reference before ordering. |
Important Fitment Note
This is the non-tilt Mercury Verado helm. If the boat uses or needs a tilt steering wheel position, order the Mercury Verado 50cm tilt helm, item 8M0137451.
OEM & Cross Reference Numbers
| Type | Part Numbers |
|---|---|
| Pro Marine Item Number | 8M0137449 |
| Mercury Manufacturer Item | 8M0137449 |
| Cross Reference Numbers | 8M0134643, 8M0137449, 8M0151565, 8M0240081, 892558A01, 892558A02, 892558K12, 892558K32 |
What This Part is Used For
The helm is the steering control unit mounted behind the steering wheel at the dash. This Mercury 8M0137449 helm is used when replacing the standard fixed-position helm in a compatible Verado power steering system.
If the steering system has been converted, repaired, or mixed with later-generation pump components, verify the helm, hose, pump, and harness requirements before ordering.
Related Verado Power Steering Parts
Helm Power Steering With Tilt
Mercury Verado 50cm power steering helm with tilt. Order this version when the application requires a tilt steering wheel position.
Item #: 8M0137451
View Tilt Helm
Power Steering Fluid
Mercury full synthetic power steering fluid for compatible Mercury and Verado power steering service.
Item #: 858077
View Power Steering Fluid
Mercury Verado Gen A/B Power Steering Pump Replacement
Pro Marine replacement pump for Gen A and Gen B Verado power steering systems. Cross references 8M0134359 and 8M0134736.
Item #: 8M0134736P
View Gen A/B Pump
Power Steering Pump
OEM Mercury Verado Gen C power steering pump. Pump only; hoses and conversion parts are sold separately when required.
Item #: 8M0199048
View Gen C PumpGen B to Gen C Conversion Help
If you are replacing a Verado power steering pump and need to identify whether your boat has a Gen A/B or Gen C system, review Pro Marine's conversion walkthrough before ordering pump, harness, hose, or steering components.
Read the Verado Gen B to Gen C Power Steering Conversion GuideKey Features and Benefits
- OEM Mercury Marine 50cm power steering helm.
- Standard non-tilt design for a fixed steering wheel position.
- Fits Verado power steering systems when the original application calls for this non-tilt helm.
- Cross references common Mercury helm numbers including 892558A01, 892558A02, 892558K12, and 892558K32.
- Related tilt helm, power steering fluid, Gen A/B pump, Gen C pump, and conversion guide are linked for easier steering system service planning.
Product Details
| Product | Helm Power Steering Std 50Cm |
| Application | Mercury Verado power steering systems |
| Manufacturer | Mercury Marine |
| OEM or Aftermarket | OEM |
| Helm Style | Standard non-tilt |
FAQ
Is this the tilt helm?
No. This is the standard non-tilt Mercury Verado helm. For the tilt version, order item 8M0137451.
What does this helm fit?
This helm fits Verado power steering systems that require the 50cm standard non-tilt helm. Verify your original helm part number and steering configuration before ordering.
Which pump should I order with Verado steering service?
Identify the pump generation first. Pro Marine offers a Gen A/B replacement pump, item 8M0134736P, and an OEM Mercury Gen C pump, item 8M0199048. Use the Gen B to Gen C conversion walkthrough if you are planning an upgrade.
Is power steering fluid linked for this system?
Yes. Mercury full synthetic power steering fluid is available separately as item 858077.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Mercury Verado power steering helm, Mercury Verado non-tilt helm, standard 50cm helm, fixed position Verado helm, OEM Mercury steering helm, Verado hydraulic power steering helm, Verado Gen B to Gen C conversion, Verado Gen C pump, Verado Gen A B pump.
Searchable Part Numbers
8M0137449, 8M0134643, 8M0151565, 8M0240081, 892558A01, 892558A02, 892558K12, 892558K32, 8M0137451, 858077, 858077K01, 858002K01, 858077KC1, 8M0134736P, 8M0134736, 8M0134359, 8M0199048.
8M0137449
8M0137449
8M0151565
8M0240081
892558A01
892558A02
892558K12
892558K12
892558K32
Hydraulic Steering Cylinder Bleed Kit
Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit
The Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit is designed to simplify hydraulic steering system bleeding and service procedures for marine hydraulic steering applications.
This bleed kit is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.
What a Hydraulic Steering Bleed Kit Does
A hydraulic steering bleed kit helps remove trapped air from the steering system during installation, maintenance, or repair procedures.
Proper bleeding allows hydraulic fluid to fully circulate through the helm, hoses, and steering cylinder, helping restore smooth steering feel and consistent steering response.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Hydraulic Steering Installation | Bleeding air from newly installed steering systems |
| Hydraulic Steering Service | Routine steering maintenance and repairs |
| Steering Cylinder Replacement | Bleeding the system after cylinder installation |
| Repower Projects | Completing hydraulic steering upgrades |
| Marine Repair Shops | Professional hydraulic steering service work |
Complete or Service Your Steering System
Complete Steering Kit
Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitHydraulic Fluid
Use quality hydraulic steering fluid during steering filling and bleeding procedures.
View PRO-OIL15 Hydraulic FluidFill Hose Assembly
Fill hose assemblies simplify steering fluid filling and help maintain fluid supply during bleeding.
View 102P Fill Hose AssemblyHydraulic Steering Components
Shop compatible helm pumps, cylinders, hydraulic hoses, and steering service components.
Shop Hydraulic Steering ComponentsKey Features and Benefits
- Designed for hydraulic steering system bleeding
- Helps remove trapped air from steering cylinders and hoses
- Improves steering response and steering feel
- Useful during installation and maintenance procedures
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Useful for marine technicians and DIY boat owners
- Helps simplify hydraulic steering service work
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Hydraulic steering bleed kit
- Function: Steering system bleeding and air removal
- Connection Type: Steering cylinder bleed fittings
- Typical Use: Hydraulic steering installation and maintenance
- Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
- Related Components: Helm pumps, steering cylinders, hydraulic hoses, fill hose assemblies, and steering fluid
FAQ
What does a hydraulic steering bleed kit do?
A bleed kit helps remove trapped air from the hydraulic steering system during installation or service procedures.
Why is bleeding hydraulic steering important?
Proper bleeding removes trapped air that can cause soft steering feel, inconsistent response, or steering noise.
What steering systems is this compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar systems.
Can this be used for new steering installations?
Yes. Bleeding is required during most new hydraulic steering installations and cylinder replacements.
Is this useful for DIY steering service?
Yes. This bleed kit helps simplify the steering bleeding process for both professional technicians and DIY boat owners.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-BLEEDKIT, hydraulic steering bleed kit, hydraulic cylinder bleed kit, Pro Marine bleed kit, SeaStar bleed kit, Uflex bleed kit, steering cylinder bleed hose, hydraulic steering service kit, hydraulic steering maintenance tools, steering bleed fittings
Replacement Hydraulic Steering Cylinder
Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder
The Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder is the replacement steering cylinder used with the Pro Marine 350-HSTEER hydraulic steering system. It is designed for high-horsepower single outboard setups where smooth, controlled steering response is critical.
This is the cylinder only. Helm pump, hoses, steering fluid, and fill/bleed accessories are sold separately unless purchased as part of the complete 350-HSTEER system.
What This Cylinder Is Used For
The steering cylinder converts hydraulic pressure from the helm pump into side-to-side movement at the outboard engine. It is the component that physically moves the engine when you turn the steering wheel.
If your current cylinder is leaking, damaged, binding, or worn, replacing it can restore proper steering control and improve the overall feel of the system.
Read our 350-HSTEER Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| 350-HSTEER Systems | Replacement hydraulic steering cylinder |
| Single Outboards up to 350HP | High-horsepower hydraulic steering applications |
| Bass Boats | Responsive steering and control at speed |
| Bay Boats | Smooth steering in shallow and open water |
| Center Consoles | Reliable steering feel for offshore and coastal use |
Build or Service Your Steering System
Complete Steering Kit
Need the full system instead of just the cylinder? The complete kit includes the cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitHelm Pump
Pair this cylinder with the matching Pro Marine helm pump for proper hydraulic steering operation.
View 350-HELM-025 Helm PumpHydraulic Hoses
Select the correct hydraulic hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Hose
Hydraulic fluid and a fill hose assembly help make installation and bleeding easier during service.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Complete Your Steering Setup
Need additional Pro Marine steering components?
Key Features and Benefits
- Replacement hydraulic steering cylinder for 350-HSTEER systems
- Designed for high-horsepower single outboard steering applications
- Helps restore smooth steering movement and control
- Front-mount hydraulic steering cylinder design
- Works with hydraulic helm, hose, and fluid circuit
- Good option for service, repair, or steering system rebuilds
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Steering cylinder
- Connection Type: Hydraulic hose connections to helm circuit
- Typical Use: Single outboard applications up to 350HP when used with the proper system
- Related Components: Helm pump, hydraulic hoses, steering fluid, fittings, and fill/bleed tools
FAQ
Is this the complete steering system?
No. This listing is for the hydraulic steering cylinder only. The complete
system is available as the Pro Marine 350-HSTEER kit.
What system does this cylinder work with?
This cylinder is designed for use with the Pro Marine 350-HSTEER hydraulic
steering system.
Are hydraulic hoses included?
No. Hydraulic hoses are sold separately so you can choose the correct length
for your boat and rigging layout.
When should I replace a steering cylinder?
Replace the cylinder if it is leaking, damaged, binding, corroded, or no
longer holding proper steering control.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HSTEER-CYL, Pro Marine hydraulic steering cylinder, hydraulic steering cylinder, outboard steering cylinder, front mount steering cylinder, 350-HSTEER replacement cylinder, hydraulic steering repair, boat steering cylinder