S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Pro Marine Verado Steering Cylinder Seal Kit
Hydraulic Steering Cylinder Reseal Kit for Mercury Verado Systems
This Pro Marine steering cylinder seal kit is an aftermarket replacement kit for select Mercury Verado hydraulic steering cylinder assemblies.
The kit includes the seals and O-rings commonly required to reseal compatible Verado steering cylinders during steering system service and repair.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Mercury Verado 135-400HP | FourStroke | Hydraulic Steering | Used in compatible Mercury Verado steering cylinder assemblies |
| Mercury L6 Verado Models | Supercharged FourStroke | Hydraulic Steering | Used in compatible integrated steering systems |
| Mercury V8 / V10 Verado Models | FourStroke | Hydraulic Steering | Used in compatible Verado steering cylinder assemblies |
Always verify your Mercury model, serial number, and steering cylinder diagram before ordering hydraulic steering seals and components.
OEM Part Numbers & Cross References
| Brand / Type | Part Number |
|---|---|
| Pro Marine | 2700P |
| Replaces Mercury OEM | 896173A01 |
| Replaces Mercury OEM | 8M0045604 |
Related Steering Cylinder Seal
Need the steering cylinder attachment seal used when reinstalling the steering cylinder to the engine? See the Pro Marine Steering Cylinder Seal .
What This Steering Cylinder Seal Kit is Used For
This Pro Marine steering cylinder seal kit is used to reseal compatible Mercury Verado hydraulic steering cylinder assemblies.
The kit includes multiple hydraulic seals and O-rings commonly replaced during steering cylinder repair and hydraulic steering service.
Worn or damaged steering cylinder seals may allow hydraulic fluid leakage, steering pressure loss, or reduced steering performance.
Replacing steering cylinder seals during service helps maintain proper hydraulic steering operation and reduce fluid leakage.
Key Features and Benefits
- Pro Marine aftermarket steering cylinder seal kit
- Replaces Mercury OEM seal kits 896173A01 and 8M0045604
- Fits select Mercury Verado hydraulic steering systems
- Includes seals and O-rings commonly needed for steering cylinder reseal service
- Helps maintain hydraulic steering pressure
- Helps reduce steering fluid leakage
- Common service kit for Verado steering cylinder repair
- Aftermarket alternative to OEM Mercury steering seal kits
Steering Cylinder Seal Kit Details
- Brand: Pro Marine
- Part Type: Steering Cylinder Seal Kit
- Pro Marine Part Number: 2700P
- Replaces OEM: Mercury 896173A01 and 8M0045604
- Application: Mercury Verado Steering Cylinder Assemblies
- System: Hydraulic Steering System
- Use: Steering cylinder reseal service
- Quantity Sold: Kit
FAQ
What does Pro Marine 2700P fit?
This seal kit fits select Mercury Verado hydraulic steering cylinder assemblies using compatible steering system components.
What Mercury seal kits does this replace?
This Pro Marine kit replaces Mercury OEM seal kits 896173A01 and 8M0045604.
What is included in this kit?
The kit includes the seals and O-rings commonly required to reseal compatible Verado steering cylinders.
Can bad steering seals cause fluid leaks?
Yes. Worn or damaged steering cylinder seals may allow hydraulic steering fluid leakage and steering performance issues.
Do I still need the steering cylinder attachment seal?
Depending on the repair being performed, you may also need the steering cylinder seal used when reinstalling the steering cylinder to the engine.
Is this an OEM Mercury kit?
No. This is a Pro Marine aftermarket steering cylinder reseal kit designed as a replacement for compatible Mercury OEM kits.
Should I verify fitment before ordering?
Yes. Mercury used multiple steering cylinder configurations depending on model and production range, so serial number verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic steering components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
2700P, 896173A01, 8M0045604, Pro Marine steering seal kit, Verado steering cylinder seal kit, Mercury steering cylinder reseal kit, Mercury Verado steering kit, Verado hydraulic steering seal kit, Mercury steering cylinder rebuild kit, Mercury hydraulic steering repair, Verado steering ram seal kit, Mercury steering cylinder service kit, Verado steering cylinder reseal
8M0045604
896173A01
8M0134636
8M0134637
8M0134638
8M0137451
8M0151559
892516A01
892516A02
892516K01
892516K02
892516K03
892516K11
892516K12
892516K31
892516K32
892516K33
892516K51
892516K52
892516K53
880659T
896500A01
OEM Mercury Verado Steering Cylinder Seal Kit
Mercury Hydraulic Steering Cylinder Reseal Kit
This genuine OEM Mercury steering cylinder seal kit is used to reseal select Mercury Verado hydraulic steering cylinder assemblies.
The kit includes the seals and O-rings commonly required during steering cylinder repair and hydraulic steering system service.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Mercury Verado 135-400HP | FourStroke | Hydraulic Steering | Used in compatible Mercury Verado steering cylinder assemblies |
| Mercury L6 Verado Models | Supercharged FourStroke | Hydraulic Steering | Used in compatible integrated steering systems |
| Mercury V8 / V10 Verado Models | FourStroke | Hydraulic Steering | Used in compatible Verado steering cylinder assemblies |
Always verify your Mercury model, serial number, and steering cylinder diagram before ordering hydraulic steering seals and components.
OEM Part Numbers & Supersessions
| Brand | Part Number |
|---|---|
| Mercury OEM | 8M0045604 |
| Supersedes Mercury OEM | 896173A01 |
| Alternate Search Format | 8M0045604 |
Related Steering Cylinder Seal
Need the steering cylinder attachment seal used when reinstalling the steering cylinder to the engine? See the Pro Marine Steering Cylinder Seal .
Aftermarket Alternative
Looking for an aftermarket replacement option? See the Pro Marine Steering Cylinder Seal Kit .
What This Steering Cylinder Seal Kit is Used For
This Mercury steering cylinder seal kit is used to reseal compatible Verado hydraulic steering cylinder assemblies.
The kit includes multiple hydraulic seals and O-rings commonly replaced during steering cylinder repair and hydraulic steering system service.
Worn or damaged steering cylinder seals may allow hydraulic fluid leakage, steering pressure loss, or reduced steering performance.
Replacing steering cylinder seals during service helps maintain proper hydraulic steering operation and reduce fluid leakage.
Key Features and Benefits
- Genuine OEM Mercury steering cylinder seal kit
- Current Mercury OEM part number 8M0045604
- Supersedes Mercury OEM seal kit 896173A01
- Fits select Mercury Verado hydraulic steering systems
- Includes seals and O-rings commonly needed for steering cylinder reseal service
- Helps maintain hydraulic steering pressure
- Helps reduce steering fluid leakage
- OEM Mercury fit and material compatibility
Steering Cylinder Seal Kit Details
- Brand: Mercury
- Part Type: Steering Cylinder Seal Kit
- Current OEM Part Number: 8M0045604
- Supersedes OEM: 896173A01
- Application: Mercury Verado Steering Cylinder Assemblies
- System: Hydraulic Steering System
- Use: Steering cylinder reseal service
- Quantity Sold: Kit
FAQ
What does Mercury 8M0045604 fit?
This seal kit fits select Mercury Verado hydraulic steering cylinder assemblies using compatible steering system components.
Does this replace Mercury 896173A01?
Yes. Mercury OEM part number 8M0045604 supersedes older seal kit number 896173A01.
What is included in this kit?
The kit includes the seals and O-rings commonly required to reseal compatible Verado steering cylinders.
Can bad steering seals cause fluid leaks?
Yes. Worn or damaged steering cylinder seals may allow hydraulic steering fluid leakage and steering performance issues.
Do I still need the steering cylinder attachment seal?
Depending on the repair being performed, you may also need the steering cylinder seal used when reinstalling the steering cylinder to the engine.
Is there an aftermarket version available?
Yes. Pro Marine also offers an aftermarket steering cylinder reseal kit for compatible Verado steering systems.
Should I verify fitment before ordering?
Yes. Mercury used multiple steering cylinder configurations depending on model and production range, so serial number verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic steering components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0045604, 896173A01, Mercury steering cylinder seal kit, Mercury Verado steering seal kit, Mercury hydraulic steering kit, Verado steering cylinder reseal kit, Mercury steering rebuild kit, Mercury Verado seal kit, Verado hydraulic steering seal kit, Mercury steering ram seal kit, Mercury steering cylinder service kit, Verado steering repair kit
8M0045604
896173A01
892554A01
892554T
8M0137449
8M0137449
8M0151565
8M0240081
892558A01
892558A02
892558K12
892558K12
892558K32
Hydraulic Steering Cylinder Bleed Kit
Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit
The Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit is designed to simplify hydraulic steering system bleeding and service procedures for marine hydraulic steering applications.
This bleed kit is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.
What a Hydraulic Steering Bleed Kit Does
A hydraulic steering bleed kit helps remove trapped air from the steering system during installation, maintenance, or repair procedures.
Proper bleeding allows hydraulic fluid to fully circulate through the helm, hoses, and steering cylinder, helping restore smooth steering feel and consistent steering response.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Hydraulic Steering Installation | Bleeding air from newly installed steering systems |
| Hydraulic Steering Service | Routine steering maintenance and repairs |
| Steering Cylinder Replacement | Bleeding the system after cylinder installation |
| Repower Projects | Completing hydraulic steering upgrades |
| Marine Repair Shops | Professional hydraulic steering service work |
Complete or Service Your Steering System
Complete Steering Kit
Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitHydraulic Fluid
Use quality hydraulic steering fluid during steering filling and bleeding procedures.
View PRO-OIL15 Hydraulic FluidFill Hose Assembly
Fill hose assemblies simplify steering fluid filling and help maintain fluid supply during bleeding.
View 102P Fill Hose AssemblyHydraulic Steering Components
Shop compatible helm pumps, cylinders, hydraulic hoses, and steering service components.
Shop Hydraulic Steering ComponentsKey Features and Benefits
- Designed for hydraulic steering system bleeding
- Helps remove trapped air from steering cylinders and hoses
- Improves steering response and steering feel
- Useful during installation and maintenance procedures
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Useful for marine technicians and DIY boat owners
- Helps simplify hydraulic steering service work
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Hydraulic steering bleed kit
- Function: Steering system bleeding and air removal
- Connection Type: Steering cylinder bleed fittings
- Typical Use: Hydraulic steering installation and maintenance
- Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
- Related Components: Helm pumps, steering cylinders, hydraulic hoses, fill hose assemblies, and steering fluid
FAQ
What does a hydraulic steering bleed kit do?
A bleed kit helps remove trapped air from the hydraulic steering system during installation or service procedures.
Why is bleeding hydraulic steering important?
Proper bleeding removes trapped air that can cause soft steering feel, inconsistent response, or steering noise.
What steering systems is this compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar systems.
Can this be used for new steering installations?
Yes. Bleeding is required during most new hydraulic steering installations and cylinder replacements.
Is this useful for DIY steering service?
Yes. This bleed kit helps simplify the steering bleeding process for both professional technicians and DIY boat owners.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-BLEEDKIT, hydraulic steering bleed kit, hydraulic cylinder bleed kit, Pro Marine bleed kit, SeaStar bleed kit, Uflex bleed kit, steering cylinder bleed hose, hydraulic steering service kit, hydraulic steering maintenance tools, steering bleed fittings
30cc Tilt Hydraulic Steering Helm Pump
Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump
The Pro Marine 350-THELM-030 Tilt Hydraulic Helm Pump is a 30cc tilt hydraulic steering helm designed for smooth, responsive steering control while allowing adjustable steering wheel positioning for improved driver comfort.
This Pro Marine tilt helm is designed for the 350-HSTEER system and is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
What a 30cc Tilt Helm Pump Does
The helm pump creates the hydraulic pressure that moves fluid through the steering hoses and into the steering cylinder. When you turn the wheel, the helm controls how much fluid is moved through the system, which directly affects steering feel and wheel turns lock-to-lock.
A 30cc tilt helm moves more fluid per steering wheel turn than smaller helms while also allowing the steering wheel angle to be adjusted for improved comfort and driving position.
Read our Hydraulic Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| Single Outboards up to 350HP | Hydraulic steering helm applications requiring adjustable tilt positioning |
| Center Console Boats | Improved comfort for seated and standing driving positions |
| Bay Boats | Responsive steering with adjustable helm angle |
| Offshore Boats | Comfortable steering position for long-distance operation |
| Performance Setups | Useful where responsive steering and driver comfort are important |
Complete or Service Your Steering System
Complete Steering Kit
Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitSteering Cylinder
Pair this helm with a compatible hydraulic steering cylinder for proper system operation and steering response.
View 350-HSTEER-CYL CylinderHydraulic Hoses
Choose the correct hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Accessories
Hydraulic steering fluid and fill hose assemblies help simplify installation, filling, and bleeding.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Key Features and Benefits
- 30cc tilt hydraulic helm pump design
- 1.83 cubic inches per revolution hydraulic displacement
- Adjustable tilt steering position for improved comfort
- Can provide quicker steering response when properly matched
- Designed for the Pro Marine 350-HSTEER hydraulic steering system
- Compatible with many standard hydraulic steering systems
- Works with Pro Marine, SeaStar®, and Uflex® style setups
- Good choice for center consoles and performance boats
- Helps reduce steering effort compared to cable steering
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Tilt hydraulic helm pump
- Helm Size: 30cc
- Displacement: 1.83 cu in/rev
- Connection Type: Hydraulic steering hose circuit
- Tilt Feature: Adjustable steering wheel angle
- Typical Use: Single outboard hydraulic steering systems
- Compatible Systems: Pro Marine 350-HSTEER, SeaStar®, Uflex®, and similar front-mount hydraulic steering systems
- Related Components: Steering cylinder, hydraulic hoses, steering fluid, fittings, and fill/bleed kit
FAQ
What does a tilt hydraulic helm do?
A tilt helm allows the steering wheel angle to be adjusted while also providing hydraulic steering control for the outboard engine.
What is the advantage of a tilt helm?
Tilt helms improve driver comfort by allowing the wheel position to be adjusted for seated or standing operation.
What steering systems is this helm compatible with?
It is designed for the Pro Marine 350-HSTEER system and is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and other similar front-mount hydraulic steering setups.
Is this the complete steering system?
No. This listing is for the tilt helm pump only.
Can this helm be used on center console boats?
Yes. Tilt helms are especially popular on center console boats where adjustable steering wheel positioning improves comfort and visibility.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-THELM-030, tilt hydraulic helm pump, 30cc tilt helm, Pro Marine tilt helm, 1.83 cu in helm pump, SeaStar compatible tilt helm, Uflex compatible tilt helm, hydraulic steering tilt helm, adjustable tilt steering helm, outboard steering helm, 350-HSTEER tilt helm
