S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Suzuki Outboard Parts
Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.
Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Suzuki Outboard Parts by System
- Control Cables & Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Transom & Midsection
- Trim System
Find the Correct Suzuki Outboard Part
Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Suzuki Outboard Engine Families
Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.
- Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
- Inline Four-Cylinder: common DF70 through DF140 engine families
- Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
- High-Horsepower Offshore: DF300, DF325, and DF350 platforms
- FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications
Common Suzuki Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
- Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
- Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Suzuki Outboard Parts from Pro Marine USA?
- OEM Suzuki and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Suzuki outboard part?
Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.
Can I search Suzuki parts by OEM part number?
Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Suzuki outboard parts vary by model and year?
Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.
Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?
Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Suzuki parts?
Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.
What Suzuki outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
17400-92J00
5037176
Genuine Suzuki Marine OEM Part
Suzuki 09280-22019 OEM Internal Anode Cover O-Ring
The Suzuki 09280-22019 Anode Cover O-Ring is a genuine OEM sealing O-ring used with the internal corrosion-protection anodes found on a wide range of Suzuki four-stroke outboards.
This O-ring seals the removable internal anode cover and also cross-references to Johnson / Evinrude 5035305 for select Suzuki-built four-stroke outboards.
Part Type: Internal Anode Cover O-Ring
Manufacturer: Suzuki Marine
OEM or Aftermarket: Genuine OEM
Application: Internal Engine Anode Cover
Suzuki Part #: 09280-22019
Johnson / Evinrude Cross Reference: 5035305
OEM and Cross Reference Numbers
| Part Number | Brand | Reference |
|---|---|---|
| 09280-22019 | Suzuki Marine | OEM Part Number |
| 5035305 | Johnson / Evinrude | Cross Reference |
| 22019 | Pro Marine | Aftermarket Alternative |
What This Part is Used For
Suzuki four-stroke outboards use internal sacrificial anodes on many engine families as part of the engine's corrosion-protection system. These anodes are installed behind removable covers in the engine.
The 09280-22019 O-ring seals the internal anode cover. Maintaining this seal helps prevent leakage around the cover after an internal anode has been inspected or replaced.
Because the O-ring must be disturbed when accessing the anode, it should be inspected during internal anode service and replaced when it shows flattening, cuts, hardening, stretching, or other deterioration.
Inspect both the internal anode and its sealing O-ring whenever the anode cover is removed.
The anode and O-ring are sold separately, and the number required varies depending on the specific Suzuki engine model.
Compatible Applications
Suzuki 09280-22019 is used across a large range of Suzuki DF four-stroke outboards. Catalog application data includes the following engine families:
| Manufacturer | Engine Family | Applications |
|---|---|---|
| Suzuki | DF5-DF30 | Select DF5A, DF8A, DF9.9A/B, DF15A, DF20A, DF25/DF25A and DF30A applications |
| Suzuki | DF40-DF60 | DF40, DF40A, DF50, DF50A and DF60A families including applicable T, TH, QH, S and V variants |
| Suzuki | DF70-DF100 | Select DF70A, DF75A, DF80A, DF90, DF90A, DF100, DF100A, DF100B and DF100C applications |
| Suzuki | DF115-DF140 | DF115, DF115A/B/BG and DF140, DF140A/B/BG families including applicable T, Z, S and G variants |
| Suzuki | DF150-DF200 | DF150, DF150A/AP, DF175, DF175A/AP, DF200 and DF200A/AP families |
| Suzuki | DF225-DF300 | DF225, DF250, DF250A/AP, DF300, DF300A/AP and applicable T, Z, S and SS variants |
| Suzuki | DF300B-DF350A | Select DF300B, DF325A and DF350A applications including applicable MD variants |
| Johnson / Evinrude | 25-225 HP Four-Stroke | Select Suzuki-built Johnson / Evinrude four-stroke applications using cross reference 5035305 |
Suzuki 09280-22019 is used across numerous engine families, but the number of internal anodes and O-rings required varies by engine model.
Verify your engine model and serial number when confirming fitment and determining the quantity required for a complete internal anode service.
Matching Internal Zinc Anode
55321-87J10P Internal Zinc Anode
If you are replacing the O-ring as part of an internal anode service, inspect the corrosion-protection anode at the same time.
Pro Marine 55321-87J10P is a replacement zinc anode used with this style of internal anode cover on many compatible Suzuki four-stroke applications.
View 55321-87J10P Zinc AnodePro Marine Aftermarket Alternative
Pro Marine 22019 Anode Cover O-Ring
Looking for a cost-effective alternative to the genuine Suzuki O-ring? Pro Marine 22019 is the aftermarket replacement for Suzuki 09280-22019.
View Pro Marine 22019Installation and Service Tips
- Inspect the O-ring whenever an internal anode cover is removed.
- Replace an O-ring that is flattened, cut, hardened, stretched, or otherwise damaged.
- Inspect the internal corrosion-protection anode during the same service.
- Determine the correct quantity of O-rings and anodes for your specific engine before ordering.
- Clean the O-ring sealing surfaces before installation.
- Make sure the replacement O-ring is properly seated before reinstalling the cover.
- Follow the Suzuki service procedure and specified fastener torque for your engine.
Key Features and Benefits
- Genuine Suzuki OEM: Original Suzuki Marine replacement part 09280-22019.
- Internal Anode Seal: Designed for the removable covers protecting compatible internal engine anodes.
- Broad Suzuki Application: Cataloged across numerous Suzuki DF four-stroke engine families.
- Johnson / Evinrude Cross Reference: Cross-references to 5035305 for select Suzuki-built four-stroke applications.
- Matching Anode Available: Pro Marine 55321-87J10P zinc anodes are available separately.
- Aftermarket Option Available: Pro Marine 22019 offers an alternative to the OEM Suzuki O-ring.
FAQ
What is Suzuki 09280-22019?
Suzuki 09280-22019 is a genuine OEM O-ring used to seal an internal engine anode cover on compatible Suzuki four-stroke outboards.
What does Suzuki 09280-22019 cross-reference to?
The supplied application data cross-references Suzuki 09280-22019 to Johnson / Evinrude 5035305.
What anode is used with this O-ring?
Pro Marine stocks 55321-87J10P zinc anodes for the corresponding internal-anode application on many compatible Suzuki outboards.
Is there an aftermarket replacement for 09280-22019?
Yes. Pro Marine 22019 is available as an aftermarket alternative to the genuine Suzuki O-ring.
Should the O-ring be replaced when servicing an internal anode?
Inspect the O-ring whenever the anode cover is removed. Replace it if it is cut, flattened, hardened, stretched, or otherwise damaged.
How many 09280-22019 O-rings does my Suzuki need?
The required quantity varies by engine. Some engines use multiple internal anodes and covers. Check your exact model and serial number to determine the correct quantity.
Does 09280-22019 fit Johnson and Evinrude outboards?
The supplied application data includes select Suzuki-built Johnson / Evinrude four-stroke outboards under cross reference 5035305. Verify your exact model before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming fitment or determining how many O-rings and anodes your Suzuki requires? Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
09280-22019, 0928022019, 5035305, 22019, Suzuki 09280-22019, Johnson 5035305, Evinrude 5035305
Searchable Terms
Suzuki OEM anode cover O-ring, Suzuki internal anode O-ring, Suzuki engine anode seal, Suzuki DF anode O-ring, Suzuki DF115 anode O-ring, Suzuki DF140 anode O-ring, Suzuki DF150 anode O-ring, Suzuki DF175 anode O-ring, Suzuki DF200 anode O-ring, Suzuki DF225 anode O-ring, Suzuki DF250 anode O-ring, Suzuki DF300 anode O-ring, Suzuki DF350 anode O-ring, Johnson four stroke anode O-ring, Evinrude four stroke anode O-ring, genuine Suzuki anode O-ring
5035305
13910-89J00
13910-89J01
5032424
9-37401
13910-94701
9-37403
9-37404
9-37404
13910-87D01
9-37400
9-37402
11265-87E00-H17
11265-87E10
5030623