Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Suzuki Outboard Parts

Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.

Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Suzuki Outboard Parts by System

Find the Correct Suzuki Outboard Part

Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Suzuki Outboard Engine Families

Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.

  • Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
  • Inline Four-Cylinder: common DF70 through DF140 engine families
  • Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
  • High-Horsepower Offshore: DF300, DF325, and DF350 platforms
  • FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications

Common Suzuki Outboard Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
  • Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
  • Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Suzuki Outboard Parts from Pro Marine USA?

  • OEM Suzuki and aftermarket replacement options for many common applications.
  • Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Suzuki outboard part?

Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.

Can I search Suzuki parts by OEM part number?

Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Suzuki outboard parts vary by model and year?

Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.

Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?

Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.

Do you carry both OEM and aftermarket Suzuki parts?

Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.

What Suzuki outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 133 - 144 of 1065 ▶ ▶|
View:
Suzuki, DT40C,DT65,DT85,DT140
Item#:
18-7753
Cross Reference#:
13910-94400
9-37402
Manufacturer Item:
13910-94400
Manufacturer:
Sierra
Available:
In Stock
Your Price:
36.89
Each
Suzuki 30-100hp 1989-2010
Item#:
11265-87E10
Cross Reference#:
11265-87E00
11265-87E00-H17
11265-87E10
5030623
Manufacturer Item:
11265-87E10
Manufacturer:
Suzuki
Available:
In Stock
Your Price:
3.94
Each
Suzuki V6 2.7L DT-150 RS Bore 3.307
Item#:
FL104+2
Manufacturer:
La Sleeves
Available:
Out of Stock
Your Price:
153.90
Each
Suzuki 3Cyl DT-25, 30 Bore 2.440 O.D. 2.644
Item#:
LA093
Manufacturer:
La Sleeves
Available:
In Stock
Your Price:
125.40
Each
Suzuki V4 Carb DT-115 Bore 3.307 O.D. 3.672
Item#:
1145SA
Manufacturer:
Advanced Sleeve
Available:
Out of Stock
Your Price:
141.69
Each
Single Engine Key Switch Assembly for Select 1998-2010 Outboards

Genuine Suzuki OEM Marine Electrical Parts

Genuine Suzuki Single Engine Ignition Switch with Panel - 37100

The Genuine Suzuki 37100 Ignition Switch is an original equipment Suzuki ignition switch panel assembly designed for compatible Suzuki four-stroke outboard installations.

Unlike switch-only aftermarket replacements, this Genuine Suzuki OEM version includes the ignition switch and mounting panel assembly, making it an excellent option when replacing the complete original ignition switch panel.

Compatible applications include select Suzuki DF25, DF30, DF40, DF50, DF60, DF70, DF90, DF100, DF115, DF140, DF200, DF225, and DF250 outboards, depending on model, year, and rigging configuration.

Pro Marine Item: 37100
Manufacturer: Genuine Suzuki
Manufacturer Part Number: 37100-96J00

Complete OEM Ignition Switch Panel Assembly

This Genuine Suzuki OEM version includes the ignition switch and mounting panel.

It is intended for customers who need to replace the complete original ignition switch panel assembly rather than just the electrical switch.

Only need the switch? Pro Marine USA also offers the Pro Marine 37100P Aftermarket Ignition Switch , which does not include the mounting panel.

Product Information

Specification Details
Product Single Engine Ignition Switch Panel Assembly
Brand Genuine Suzuki OEM
Pro Marine Item Number 37100
Manufacturer Number 37100-96J00
Engine Manufacturer Suzuki Marine
Engine Type Select Four-Stroke Outboards
Application Compatible Single-Engine Ignition Panel Installations
Ignition Switch Included
Mounting Panel Included
Aftermarket Alternative Pro Marine 37100P - Switch Only

OEM and Cross Reference Numbers

The Genuine Suzuki 37100 ignition switch panel assembly is associated with the following OEM numbers.

Suzuki Part Number Description
37100-93J00 Earlier Suzuki Ignition Switch Panel Assembly
37100-96J00 Suzuki Ignition Switch Panel Assembly
37100-96J01 Later Suzuki OEM Replacement Panel Assembly Number

Related Suzuki Ignition Switch Numbers

The following Suzuki OEM numbers identify related ignition switch assemblies used within compatible Suzuki ignition panel applications:

  • 37110-93J00
  • 37110-93J01
  • 37110-93J02
Important Part Number Distinction:

Suzuki 37100-series numbers refer to ignition switch panel assemblies. Suzuki 37110-series numbers refer to individual ignition switch assemblies.

These are related components, but the packaged parts are not necessarily identical.

Confirm the original part number and control panel configuration before ordering.

What This Part Is Used For

The Suzuki ignition switch panel provides the key-operated electrical control used to start and operate compatible Suzuki outboard engines.

The ignition switch is connected to the engine's starting and ignition control circuits through the boat's electrical rigging.

The mounting panel provides the original equipment mounting arrangement for the ignition switch in compatible installations.

Replacing the complete OEM assembly may be appropriate when the ignition switch is faulty, the original panel is damaged, or the installation requires replacement of the complete Suzuki panel assembly.

Common Reasons to Replace a Suzuki Ignition Switch Panel

  • Ignition switch no longer operates consistently.
  • Engine does not respond when the key is turned.
  • Intermittent starting caused by faulty switch contacts.
  • Ignition key binds or becomes difficult to turn.
  • Corrosion or damage affects the original switch assembly.
  • Original ignition switch mounting panel is cracked or damaged.
  • Complete OEM panel replacement is preferred over switch-only repair.
Diagnostic Reminder:

A no-start condition does not automatically mean the ignition switch is defective. Check battery voltage, wiring, fuses, safety switches, and related starting components before replacing the ignition assembly.

Compatible Suzuki Outboard Applications

The following chart summarizes the supplied model and year applications associated with this Suzuki single-engine ignition switch panel.

Fitment is dependent on the engine model, original ignition switch part number, and installed rigging. Not every engine within a listed horsepower range necessarily uses this panel.

Engine Family Horsepower Listed Years Included Variations
DF25 25 HP 2000-2007 DF25, DF25Q, DF25Q(QR), DF25T
DF30 30 HP 2000-2007 DF30, DF30Q, DF30Q(QR), DF30T
DF40 40 HP 1999-2010 DF40, DF40QH, DF40TL
DF50 50 HP 1999-2010 DF50, DF50QH, DF50TL
DF60 60 HP 1998-2009 DF60, DF60HL, DF60TL
DF70 70 HP 1998-2009 DF70, DF70THL, DF70TL
DF90 90 HP 2001-2008 DF90, DF90TL
DF100 100 HP 2009-2010 DF100
DF115 115 HP 2001-2010 DF115, DF115TL
DF140 140 HP 2002-2010 DF140, DF140T, DF140Z
DF200 200 HP 2004-2010 DF200, DF200T, DF200Z
DF225 225 HP 2004-2010 DF225, DF225T, DF225Z
DF250 250 HP 2004-2010 DF250, DF250T, DF250Z
Fitment and Rigging Notice:

The table summarizes the supplied application information and does not establish universal compatibility for every engine or control installation within these model families.

Suzuki used multiple ignition switch and panel configurations across different model years and rigging packages. Confirm your original panel part number and connector configuration before ordering.

Genuine Suzuki OEM vs. Pro Marine Aftermarket

Both options are available from Pro Marine USA. Choosing the correct version depends primarily on whether you need the complete ignition panel or only the replacement switch.

Feature Genuine Suzuki 37100 Pro Marine 37100P
Manufacturer Suzuki OEM Pro Marine Aftermarket
Ignition Switch Included Included
Mounting Panel Included Not Included
Replacement Type Complete OEM Panel Assembly Switch-Only Replacement
Recommended When The complete original panel assembly requires replacement The existing panel is serviceable and only the ignition switch needs replacing

Aftermarket Alternative - Switch Only

Pro Marine 37100P Suzuki Ignition Switch

If your original Suzuki mounting panel is still in good condition, you may not need to purchase the complete OEM assembly.

The Pro Marine 37100P aftermarket replacement provides the ignition switch without the mounting panel, offering an alternative for switch-only repairs.

View Pro Marine 37100P Ignition Switch

Installation and Replacement Tips

Installation should follow the applicable Suzuki service and rigging instructions for your engine and control configuration.

  1. Disconnect the battery before working on the ignition switch wiring.
  2. Verify the existing ignition switch panel part number and replacement compatibility.
  3. Document the original connector and wiring arrangement before removing the old assembly.
  4. Remove the original ignition switch panel according to Suzuki service instructions.
  5. Inspect the mounting area and electrical connections for corrosion or damage.
  6. Install the replacement OEM panel using the proper mounting arrangement.
  7. Connect the ignition wiring according to the correct Suzuki wiring diagram.
  8. Reconnect the battery and test ignition switch operation.
  9. Confirm proper engine starting, shutdown, and associated safety system operation before operating the boat.
Important Electrical Safety Information:

Incorrect ignition switch wiring can damage electrical components or prevent proper engine starting and shutdown.

Do not assume that wire colors or terminal positions are interchangeable between different Suzuki ignition switch assemblies.

Consult the correct Suzuki wiring diagram or a qualified marine technician when installation details are uncertain.

Key Features and Benefits

  • Genuine Suzuki OEM: Original equipment Suzuki marine electrical component.
  • Complete Panel Assembly: Includes the ignition switch and mounting panel.
  • Single-Engine Configuration: Intended for compatible Suzuki single-engine ignition panel installations.
  • Original Equipment Replacement: Designed to replace the appropriate Suzuki ignition switch panel assembly.
  • Multiple OEM References: Associated with Suzuki 37100-93J00, 37100-96J00, and 37100-96J01.
  • Aftermarket Alternative Available: Pro Marine 37100P provides a switch-only replacement option.

Frequently Asked Questions

Is Suzuki 37100 a Genuine OEM ignition switch?

Yes. Pro Marine USA item 37100 is listed as a Genuine Suzuki OEM ignition switch panel assembly.

Does the Suzuki 37100 include the mounting panel?

Yes. Unlike the Pro Marine aftermarket switch-only version, the Genuine Suzuki OEM 37100 includes the mounting panel assembly.

What is the difference between Suzuki 37100 and Pro Marine 37100P?

Genuine Suzuki 37100 includes the ignition switch and mounting panel. Pro Marine 37100P is an aftermarket replacement ignition switch without the panel.

Does this ignition switch fit Suzuki DF115 and DF140 outboards?

The supplied compatibility information includes select Suzuki DF115 applications from 2001-2010 and DF140 applications from 2002-2010.

Confirm the original panel part number and rigging configuration before ordering.

Will this fit Suzuki DF200, DF225, and DF250 outboards?

The supplied application information includes select Suzuki DF200, DF225, and DF250 models from 2004-2010.

Compatibility must be verified against the original ignition panel and engine installation.

Can I replace just the ignition switch instead of the complete panel?

Yes, if your original mounting panel is serviceable and the switch-only replacement is compatible.

Pro Marine USA offers the Pro Marine 37100P Ignition Switch for customers who do not need the complete OEM panel.

Does this fit every Suzuki outboard from 25 to 250 HP?

No. The horsepower range identifies the engine families represented in the supplied compatibility data.

Not every engine within that range uses the same ignition switch panel.

What Suzuki part numbers does this replace?

Associated Suzuki panel assembly numbers include 37100-93J00, 37100-96J00, and 37100-96J01.

Confirm the appropriate replacement number for your engine and rigging configuration.

Are 37110-93J00 and 37110-93J02 the same as Suzuki 37100?

No. The 37110-series numbers identify ignition switch assemblies, while the 37100-series numbers identify complete ignition switch panel assemblies.

Can a defective ignition switch prevent my Suzuki outboard from starting?

Yes. A faulty ignition switch can interrupt starting or ignition control circuits.

Similar symptoms may also be caused by battery, wiring, fuse, or safety switch problems.

Is the Genuine Suzuki ignition switch panel better for a complete replacement?

When the original mounting panel is damaged or the complete OEM assembly needs replacement, the Genuine Suzuki 37100 is the appropriate product type to consider.

When only the switch needs replacement, Pro Marine 37100P may be a suitable alternative.

Does Pro Marine USA sell both OEM and aftermarket Suzuki ignition switches?

Yes. Pro Marine USA offers both Genuine Suzuki OEM ignition switch panel assemblies and Pro Marine aftermarket replacement switches.

Marine Dealer Discounts

Pro Marine USA supplies Genuine Suzuki OEM and aftermarket marine engine parts to marine repair shops, dealerships, technicians, engine rebuilders, and boat owners.

Qualified marine businesses can apply for a Pro Marine USA Dealer Account to access wholesale pricing and dealer benefits.

Dealer applications are generally reviewed within 24-48 hours.

Apply for a Dealer Account

Shipping and Store Policies

Policy Details
Free Shipping Free shipping on qualifying orders over $100 within the continental United States. Oil and oversized items are excluded.
Same-Day Shipping In-stock orders received before 5:30 PM EST generally ship the same business day.
Shipping Carriers UPS, USPS, and FedEx.
Typical Delivery Approximately 1-5 business days depending on destination and shipping service.
Returns Returns are accepted within 30 days on eligible new, unused items in original packaging. Installed parts are not returnable. OEM electrical components are not returnable. Return authorization is required.

Need Help Identifying Your Suzuki Ignition Switch?

Not sure whether your Suzuki outboard requires the complete OEM ignition switch panel or the aftermarket switch-only replacement?

Contact Pro Marine USA with your engine model, serial number, and original ignition switch or panel part number.

Call 941-721-3000

Contact Pro Marine USA

Searchable Part Numbers

37100, 37100-93J00, 37100-96J00, 37100-96J01, 37110-93J00, 37110-93J01, 37110-93J02, 37100P

Searchable Terms

Genuine Suzuki ignition switch, Suzuki OEM ignition switch panel, Suzuki single engine key switch, Suzuki ignition panel assembly, Suzuki 37100 ignition switch, Suzuki 37100-96J00, Suzuki 37100-96J01, Suzuki 37100-93J00, Suzuki DF25 ignition switch, Suzuki DF30 ignition switch, Suzuki DF40 ignition switch, Suzuki DF50 ignition switch, Suzuki DF60 ignition switch, Suzuki DF70 ignition switch, Suzuki DF90 ignition switch, Suzuki DF100 ignition switch, Suzuki DF115 ignition switch, Suzuki DF140 ignition switch, Suzuki DF200 ignition switch, Suzuki DF225 ignition switch, Suzuki DF250 ignition switch, Suzuki ignition switch with panel, Suzuki outboard ignition replacement, Suzuki marine electrical parts, Suzuki key switch assembly, Suzuki single engine ignition panel, Pro Marine USA Suzuki OEM parts

Item#:
37100
Cross Reference#:
37100-93J00
37100-96J00
37100-96J01
Manufacturer Item:
37100-96J00
Manufacturer:
Suzuki
Available:
In Stock
Your Price:
139.19
Each
Suzuki 3Cyl DT-25, 30 Bore 2.440 O.D. 2.664
Item#:
1122SB
Manufacturer:
Suzuki
Available:
Special Order
Your Price:
114.61
Each
Suzuki 3Cyl DT-25, 30 Bore 2.440 O.D. 2.644
Item#:
1122SA
Manufacturer:
Advanced Sleeve
Available:
In Stock
Your Price:
137.07
Each
Suzuki V6 2.7L DT-225 Bore 3.307 OD 3.739
Item#:
FL186
Manufacturer:
La Sleeves
Available:
In Stock
Your Price:
153.90
Each
Suzuki V6 DT-175, 200 Bore 3.307
Item#:
FL121
Manufacturer:
La Sleeves
Available:
In Stock
Your Price:
153.90
Each
Suzuki 2Cyl DT-60 Bore 3.307 OD 3.469
Item#:
FLB719
Manufacturer:
Suzuki
Available:
Out of Stock
Your Price:
127.49
Each
Suzuki V6 2.7L DT-225 Bore 3.307 OD 3.739
Item#:
FL128
Manufacturer:
La Sleeves
Available:
In Stock
Your Price:
153.90
Each
|◀ ◀ 133 - 144 of 1065 ▶ ▶|
View: