S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Suzuki Outboard Parts
Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.
Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Suzuki Outboard Parts by System
- Control Cables & Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Transom & Midsection
- Trim System
Find the Correct Suzuki Outboard Part
Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Suzuki Outboard Engine Families
Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.
- Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
- Inline Four-Cylinder: common DF70 through DF140 engine families
- Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
- High-Horsepower Offshore: DF300, DF325, and DF350 platforms
- FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications
Common Suzuki Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
- Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
- Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Suzuki Outboard Parts from Pro Marine USA?
- OEM Suzuki and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Suzuki outboard part?
Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.
Can I search Suzuki parts by OEM part number?
Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Suzuki outboard parts vary by model and year?
Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.
Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?
Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Suzuki parts?
Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.
What Suzuki outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
GLM 8386E Lower Unit Seal Kit
The GLM 8386E Lower Unit Seal Kit is a complete gearcase seal kit designed for Suzuki V6 outboard lower units. This kit includes the seals needed to properly service the gearcase and maintain sealing to protect internal components.
Fitment Overview
This seal kit replaces Suzuki OEM part numbers 25700-98J00 and 25700-98J01. These OEM numbers are used across Suzuki V6 gearcase assemblies found on DF200 through DF300 outboards.
OEM diagram lookup confirms this kit is used across multiple horsepower ranges and model variants that share the same gearcase design.
Compatibility
| Brand | Model | Notes |
|---|---|---|
| Suzuki | DF200 | Standard & Select Variants |
| Suzuki | DF225 | Standard & Select Variants |
| Suzuki | DF250 / DF250S / DF250SS | Multiple Gearcase Variants |
| Suzuki | DF300 | Standard & Select Variants |
These engines share a common V6 gearcase platform where this seal kit is used.
Example Model Applications
- Suzuki DF200 V6 outboards
- Suzuki DF225 V6 outboards
- Suzuki DF250, DF250S, and DF250SS models
- Suzuki DF300 V6 outboards
These are common applications. Always verify using your OEM part number or gearcase diagram.
Fits These Serial Ranges
This seal kit is used across multiple Suzuki V6 engine generations and does not follow a single serial-number break.
Important: Confirm compatibility by matching your existing seal kit to 25700-98J01 or 25700-98J00.
Looking for this same seal kit in another brand?
View Sierra 18-8386 Gearcase Seal Kit
Part Numbers and Cross References
| Type | Part Number |
|---|---|
| GLM | 8386E |
| Suzuki OEM | 25700-98J01 |
| Suzuki OEM | 25700-98J00 |
| Aftermarket | 18-8386 (Sierra) |
What This Part Is Used For
This kit is used to service the lower unit (gearcase), replacing critical seals that prevent water intrusion and maintain proper lubrication of internal gears.
- Seals prop shaft, drive shaft, and shift shaft areas
- Prevents water contamination in gear oil
- Maintains proper lubrication inside the gearcase
- Helps extend gearcase life
Worn seals can allow water into the gearcase, leading to premature wear or internal damage.
System Function and Connections
- System Type: Lower unit / gearcase
- Component Type: Seal kit
- Location: Gearcase (lower unit)
FAQ
What engines does this seal kit fit?
It fits Suzuki DF200, DF225, DF250, and DF300 V6 outboards using this gearcase design.
What does this kit replace?
It replaces Suzuki part numbers 25700-98J00 and 25700-98J01.
Is this the same as the Sierra version?
Yes, it fits the same applications as Sierra 18-8386 but is offered under the GLM brand.
When should I replace lower unit seals?
During gearcase service or if water contamination is found in the gear oil.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
8386E, 25700-98J01, 25700-98J00, Suzuki DF200 seal kit, DF250 lower unit seals, DF300 gearcase seal kit
25700-98J00
25700-98J01
87869
150hp 2020-2022
200hp 2004-2020
225hp 2004-2010Â
250hp 2004-2024
300hp 2007-2024
18-0651
Pro Marine Replacement for Suzuki Internal Engine Anode
Suzuki Anode Cover O-Ring - Replaces 09280-22019 and 5035305
The Pro Marine 22019 Anode Cover O-Ring is a replacement sealing O-ring used with the internal engine anodes found on a wide range of Suzuki four-stroke outboards and related Johnson / Evinrude four-stroke applications.
This O-ring replaces Suzuki 09280-22019 and Johnson / Evinrude 5035305. It seals the internal anode cover and should be inspected whenever the internal protection anode is removed for inspection or replacement.
Part Type: Internal Anode Cover O-Ring
Brand: Pro Marine
OEM or Aftermarket: Aftermarket
Application: Internal Engine Anode Cover
Replaces Suzuki: 09280-22019
Replaces Johnson / Evinrude: 5035305
Pro Marine Item #: 22019
OEM and Cross Reference Numbers
| Part Number | Brand / Reference | Description |
|---|---|---|
| 22019 | Pro Marine | Aftermarket Anode Cover O-Ring |
| 09280-22019 | Suzuki OEM | O-Ring, Anode Cover |
| 5035305 | Johnson / Evinrude | Cross Reference |
What This Part is Used For
Many Suzuki four-stroke outboards use replaceable internal engine anodes as part of the engine's corrosion-protection system. The anode installs behind a removable cover, and the 09280-22019 O-ring seals that cover.
When an internal anode is inspected or replaced, the O-ring should also be inspected for flattening, cuts, deterioration, or other damage that could prevent the cover from sealing correctly.
Pro Marine 22019 provides an aftermarket replacement for the original Suzuki 09280-22019 O-ring and the corresponding Johnson / Evinrude 5035305 application.
The O-ring and internal zinc anode are separate service components. If you are removing the anode cover for service, inspect both the anode and sealing O-ring before reassembly.
Compatible Applications
Pro Marine 22019 / Suzuki 09280-22019 appears across a large range of Suzuki four-stroke applications. Fitment includes the following engine families:
| Manufacturer | Engine Family | Common Variants / Applications |
|---|---|---|
| Suzuki | DF5-DF30 | Select DF5A, DF8A, DF9.9A/B, DF15A, DF20A, DF25/25A and DF30A applications |
| Suzuki | DF40-DF60 | DF40, DF40A, DF50, DF50A and DF60A families including applicable T, TH, QH, S and V variants |
| Suzuki | DF70-DF100 | Select DF70A, DF75A, DF80A, DF90, DF90A, DF100, DF100A, DF100B and DF100C applications |
| Suzuki | DF115-DF140 | DF115, DF115A/B/BG and DF140, DF140A/B/BG families including applicable T, Z, S and G variants |
| Suzuki | DF150-DF200 | DF150, DF150A/AP, DF175, DF175A/AP, DF200 and DF200A/AP families |
| Suzuki | DF225-DF300 | DF225, DF250, DF250A/AP, DF300, DF300A/AP and applicable T, Z, S and SS variants |
| Suzuki | DF300B-DF350A | Select DF300B, DF325A and DF350A applications including applicable MD variants |
| Johnson / Evinrude | 25-225 HP Four-Stroke | Select Suzuki-built Johnson / Evinrude four-stroke applications using cross reference 5035305 |
This O-ring is used across many different Suzuki engine families, but the number of internal anodes and O-rings required per engine varies by model.
Verify your engine model and serial number when determining both fitment and the quantity required for a complete internal anode service.
OEM Suzuki Version Available
Suzuki OEM 09280-22019 Anode Cover O-Ring
Prefer the genuine Suzuki component? Pro Marine USA also stocks the OEM Suzuki 09280-22019 anode cover O-ring for the same application.
View OEM Suzuki 09280-22019Don't Forget the Internal Zinc Anode
55321-87J10P Internal Zinc Anode
Servicing the internal engine anodes? The 55321-87J10P zinc anode is used with this style of anode cover O-ring on many Suzuki four-stroke applications.
Inspect the anode whenever the cover is removed and replace anodes that have reached their service limit or show excessive deterioration.
View 55321-87J10P Zinc AnodeInstallation and Service Tips
- Inspect the internal anode O-ring whenever the anode cover is removed.
- Replace O-rings that are cut, flattened, hardened, stretched, or otherwise damaged.
- Inspect the internal zinc anode at the same time.
- Confirm the number of anodes and O-rings required for your specific engine before ordering.
- Clean the sealing surfaces before installing the replacement O-ring.
- Make sure the O-ring is correctly seated before reinstalling the anode cover.
- Follow the Suzuki service procedure and specified fastener torque for your engine model.
Key Features and Benefits
- Direct Replacement: Replaces Suzuki 09280-22019 and Johnson / Evinrude 5035305.
- Internal Anode Service: Seals the removable cover used to access the internal corrosion-protection anode.
- Broad Suzuki Application: Used across numerous Suzuki DF four-stroke engine families.
- Johnson / Evinrude Applications: Also cross-references to select Suzuki-built Johnson / Evinrude four-stroke outboards.
- OEM Option Available: Genuine Suzuki 09280-22019 is also available from Pro Marine USA.
- Matching Anode Available: 55321-87J10P zinc anodes can be ordered at the same time for internal anode service.
FAQ
What does Pro Marine 22019 replace?
Pro Marine 22019 replaces Suzuki 09280-22019 and cross-references to Johnson / Evinrude 5035305.
What is the 09280-22019 O-ring used for?
It seals the cover used to access an internal corrosion-protection anode on compatible Suzuki and related Johnson / Evinrude four-stroke outboards.
Does Pro Marine carry the OEM Suzuki version?
Yes. Genuine Suzuki 09280-22019 is also available separately from Pro Marine USA.
What anode goes with this O-ring?
Pro Marine stocks 55321-87J10P zinc anodes used with this internal-anode arrangement on many compatible Suzuki applications.
Should I replace the O-ring when replacing an internal anode?
The O-ring should be inspected whenever the cover is removed. Replace it if it is flattened, hardened, cut, stretched, or otherwise damaged.
How many O-rings does my Suzuki outboard require?
The quantity varies by engine model. Some Suzuki engines use multiple internal anodes and therefore require multiple O-rings during a complete anode service. Verify the quantity for your specific model and serial number.
Does this fit Johnson and Evinrude four-stroke outboards?
Yes, select Suzuki-built Johnson / Evinrude four-stroke applications use cross reference 5035305. Verify your exact model before ordering.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, repair facility, or marine industry professional? Pro Marine USA offers dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 in the continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help confirming fitment or determining how many O-rings and anodes your engine requires? Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
22019, 09280-22019, 0928022019, 5035305, Suzuki 09280-22019, Johnson 5035305, Evinrude 5035305
Searchable Terms
Suzuki anode cover O-ring, Suzuki internal anode O-ring, Suzuki engine anode seal, Suzuki DF anode O-ring, Suzuki DF115 anode O-ring, Suzuki DF140 anode O-ring, Suzuki DF150 anode O-ring, Suzuki DF175 anode O-ring, Suzuki DF200 anode O-ring, Suzuki DF225 anode O-ring, Suzuki DF250 anode O-ring, Suzuki DF300 anode O-ring, Suzuki DF350 anode O-ring, Johnson four stroke anode O-ring, Evinrude four stroke anode O-ring, Suzuki internal zinc anode seal
5035305
0341085
0769304
37100-96J10
37100-96J11
37100-96J12
37100-96J13
37100-96J14
37100-96J15
37100-96J16
37100-96J17
5035077
5034776
32101-92E10
32101-92E11
