S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Suzuki Outboard Parts
Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.
Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Suzuki Outboard Parts by System
- Control Cables & Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Transom & Midsection
- Trim System
Find the Correct Suzuki Outboard Part
Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Suzuki Outboard Engine Families
Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.
- Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
- Inline Four-Cylinder: common DF70 through DF140 engine families
- Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
- High-Horsepower Offshore: DF300, DF325, and DF350 platforms
- FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications
Common Suzuki Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
- Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
- Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Suzuki Outboard Parts from Pro Marine USA?
- OEM Suzuki and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Suzuki outboard part?
Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.
Can I search Suzuki parts by OEM part number?
Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Suzuki outboard parts vary by model and year?
Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.
Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?
Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Suzuki parts?
Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.
What Suzuki outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
0351896
0354149
321511
351896
354149
67275-95600
701-48345-30-00
703-48345-00-00
703-48345-01-00
55481
89876
89876A3
9-37855
MAR-FLTHD-10-BK
55481
89876
89876A3
9-37855
9-37862
Sierra Marine Fuel / Water Separator Filter
Sierra 18-7920 Fuel / Water Separator - 10 Micron - 1"-12 Thread
The Sierra 18-7920 Fuel / Water Separator is a 10-micron spin-on replacement filter designed for universal marine fuel filtration applications using a 1"-12 thread.
This filter uses the large center-hole configuration and is designed to help remove water and fine contaminants from the fuel supply before they reach the engine.
Sierra 18-7920 cross references popular Mercury, Johnson / Evinrude, OMC, Racor and Fram fuel / water separator numbers listed below.
Thread: 1"-12
Filtration: 10 Micron
Style: Spin-On Replacement
Application: Universal Marine
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Sierra |
| Sierra Part Number | 18-7920 |
| Filter Type | Fuel / Water Separator |
| Filtration Rating | 10 Micron |
| Thread Pitch | 1"-12 |
| Configuration | Large Center Hole |
| Replacement Style | Spin-On |
| Application | Universal Marine |
OEM & Cross Reference Numbers
| Manufacturer / Brand | Part Number |
|---|---|
| Sierra | 18-7920 |
| Fram | CH33APL |
| Johnson / Evinrude Outboard | 771839 |
| Mercury Marine | 35-809099 |
| OMC Stern Drive | 771839 |
| Racor | B32014 |
| Racor | S3214 |
Universal Marine Application
Sierra 18-7920 is a universal replacement fuel / water separator filter for compatible marine filter heads using a 1"-12 threaded filter.
Because this filter is used across multiple marine engine brands and fuel systems, fitment should be determined by the filter-head thread and the existing filter cross-reference number rather than by engine horsepower alone.
This is the large-hole 1"-12 thread style fuel / water separator.
Compare your existing filter number and filter-head thread before ordering. Marine fuel separator filters may look very similar while using different center-hole sizes or thread pitches.
What a Fuel / Water Separator Does
A marine fuel / water separator helps protect the engine fuel system by removing water and particulate contamination before the fuel reaches the engine.
Water can enter a marine fuel system through condensation, contaminated fuel or moisture in the tank. The separator provides an additional stage of filtration before the engine-mounted fuel filter or fuel injection system.
10-Micron Filtration
The Sierra 18-7920 is rated at 10 microns, allowing it to capture fine fuel contaminants while separating water from the fuel supply.
Maintaining a clean fuel / water separator can help reduce the chance of restricted fuel flow and contamination reaching carburetors, fuel pumps or fuel injection components.
When Should a Fuel / Water Separator Be Replaced?
Replacement intervals vary based on engine use, fuel quality and operating conditions. Fuel / water separator filters should be inspected and replaced as part of regular marine engine maintenance.
Replacement should also be considered whenever contaminated fuel or water in the fuel system is suspected.
Common Reasons for Replacement
- Routine annual or seasonal maintenance
- Water found in the fuel system
- Contaminated or stale fuel
- Restricted fuel flow
- Engine fuel starvation symptoms
- Unknown age of the existing fuel separator
- Replacing Fram CH33APL
- Replacing Johnson / Evinrude or OMC 771839
- Replacing Mercury 35-809099
- Replacing Racor B32014 or S3214
Installation Notes
Confirm that the filter head uses the correct 1"-12 thread before installation.
Follow the engine or filter-head manufacturer's installation procedure. Inspect the filter-head sealing surface and make sure the old filter gasket has been completely removed before installing the replacement.
Key Features and Benefits
- Sierra marine replacement fuel / water separator
- Sierra part number 18-7920
- 10-micron filtration rating
- 1"-12 thread pitch
- Large center-hole configuration
- Spin-on replacement design
- Universal marine application
- Replaces Fram CH33APL
- Replaces Johnson / Evinrude 771839
- Replaces OMC 771839
- Replaces Mercury 35-809099
- Replaces Racor B32014
- Replaces Racor S3214
- Helps remove water and contaminants from marine fuel
FAQ
What is the micron rating of Sierra 18-7920?
The Sierra 18-7920 is a 10-micron fuel / water separator.
What thread does Sierra 18-7920 use?
It uses a 1"-12 thread.
Is this the large-hole fuel / water separator?
Yes. Sierra 18-7920 is the large center-hole configuration.
Is Sierra 18-7920 a spin-on filter?
Yes. It is a spin-on replacement fuel / water separator.
What Mercury filter does Sierra 18-7920 replace?
It cross references Mercury Marine 35-809099.
What Johnson / Evinrude or OMC number does it replace?
It replaces 771839.
What Racor filters does it replace?
It cross references Racor B32014 and S3214.
What Fram filter does it replace?
It cross references Fram CH33APL.
Is this filter engine-specific?
No. It has a universal marine application for compatible
filter heads using the correct 1"-12 thread.
How do I know if this filter fits my boat?
Compare the existing filter part number and verify that your filter head
uses a 1"-12 thread. Cross-reference numbers are listed above.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help verifying the correct fuel separator?
Contact Pro Marine
Phone: 941-721-3000
Searchable Terms
18-7920, Sierra 18-7920, Sierra fuel water separator, Sierra water separator filter, marine fuel water separator, marine fuel filter, 10 micron fuel filter, 10 micron water separator, 1-12 fuel filter, 1 inch 12 thread fuel filter, large hole fuel water separator, spin on marine fuel filter, universal marine fuel separator, CH33APL, Fram CH33APL, 771839, Evinrude 771839, Johnson 771839, OMC 771839, 35-809099, Mercury 35-809099, Mercury fuel water separator, B32014, Racor B32014, S3214, Racor S3214, boat fuel water separator, outboard fuel separator, sterndrive fuel separator
0002507
0771839
18-7920