Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Suzuki Outboard Parts

Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.

Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Suzuki Outboard Parts by System

Find the Correct Suzuki Outboard Part

Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Suzuki Outboard Engine Families

Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.

  • Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
  • Inline Four-Cylinder: common DF70 through DF140 engine families
  • Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
  • High-Horsepower Offshore: DF300, DF325, and DF350 platforms
  • FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications

Common Suzuki Outboard Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
  • Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
  • Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Suzuki Outboard Parts from Pro Marine USA?

  • OEM Suzuki and aftermarket replacement options for many common applications.
  • Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Suzuki outboard part?

Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.

Can I search Suzuki parts by OEM part number?

Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Suzuki outboard parts vary by model and year?

Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.

Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?

Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.

Do you carry both OEM and aftermarket Suzuki parts?

Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.

What Suzuki outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 733 - 744 of 1065 ▶ ▶|
View:
Yamaha 1/4" Stainless Steel
Item#:
18-7777
Cross Reference#:
MAR-FLTHD-SS-12
MAR-FLTHD-10-BK
9-37862
Manufacturer Item:
MAR-FLTHD-SS-12
Manufacturer:
Sierra
Available:
In Stock
Your Price:
115.89
Each
Item#:
311679
Cross Reference#:
0175227
0360941
0398319
0435918
0765595
0777715
18-7831
18-7831
311679
360941
398319
40165
765595
777715
802128A1
Manufacturer Item:
398319
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
8.19
Each
Item#:
18-4264
Cross Reference#:
9-40546
Manufacturer:
Sierra
Available:
In Stock
Your Price:
6.59
Each
5/16 & 3/8 Barb w/ 1/4NPT Racor Style 10 Micron
Item#:
7932P
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
66.83
Each
Mercury 40-115 EFI 4 Stroke All Verado Honda BF 225-250D
Item#:
8798P
Cross Reference#:
HZVL16910003
16910-ZVL-003
8M0153652
879885K
879885Q
879885T
Manufacturer Item:
879885Q
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
11.13
Each
Racor Style 1/4" NPT Aluminum Includes 1/4 Fuel Fitting
Item#:
7853P
Cross Reference#:
MAR-FLTHD-AL-12
18-7853-1
55481
89876
89876A3
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
30.85
Each
Racor Style 10 Micron
Item#:
7919P
Cross Reference#:
18-7919
35-809097
8M0103095
8M0146203
809097
Manufacturer Item:
809097
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
09/17/2026
Your Price:
22.22
Each
Hydraulic Steering Cylinder Bleed Kit for Pro Marine SeaStar & Uflex System

Hydraulic Steering Cylinder Bleed Kit

Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit

The Pro Marine 350-BLEEDKIT Hydraulic Cylinder Bleed Kit is designed to simplify hydraulic steering system bleeding and service procedures for marine hydraulic steering applications.

This bleed kit is compatible with many standard hydraulic steering systems, including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.

What a Hydraulic Steering Bleed Kit Does

A hydraulic steering bleed kit helps remove trapped air from the steering system during installation, maintenance, or repair procedures.

Proper bleeding allows hydraulic fluid to fully circulate through the helm, hoses, and steering cylinder, helping restore smooth steering feel and consistent steering response.

Pro Tip: Air trapped inside a hydraulic steering system can cause soft steering feel, steering hesitation, noise, or inconsistent steering response. Proper bleeding is one of the most important steps during hydraulic steering installation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
Hydraulic Steering Installation Bleeding air from newly installed steering systems
Hydraulic Steering Service Routine steering maintenance and repairs
Steering Cylinder Replacement Bleeding the system after cylinder installation
Repower Projects Completing hydraulic steering upgrades
Marine Repair Shops Professional hydraulic steering service work

Complete or Service Your Steering System

Complete Steering Kit

Need a complete hydraulic steering package? The 350-HSTEER kit includes the steering cylinder, helm pump, hydraulic fluid, and fill hose assembly.

View 350-HSTEER Complete Kit

Hydraulic Fluid

Use quality hydraulic steering fluid during steering filling and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Fill Hose Assembly

Fill hose assemblies simplify steering fluid filling and help maintain fluid supply during bleeding.

View 102P Fill Hose Assembly

Hydraulic Steering Components

Shop compatible helm pumps, cylinders, hydraulic hoses, and steering service components.

Shop Hydraulic Steering Components

Key Features and Benefits

  • Designed for hydraulic steering system bleeding
  • Helps remove trapped air from steering cylinders and hoses
  • Improves steering response and steering feel
  • Useful during installation and maintenance procedures
  • Compatible with many standard hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style setups
  • Useful for marine technicians and DIY boat owners
  • Helps simplify hydraulic steering service work

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Hydraulic steering bleed kit
  • Function: Steering system bleeding and air removal
  • Connection Type: Steering cylinder bleed fittings
  • Typical Use: Hydraulic steering installation and maintenance
  • Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
  • Related Components: Helm pumps, steering cylinders, hydraulic hoses, fill hose assemblies, and steering fluid

FAQ

What does a hydraulic steering bleed kit do?
A bleed kit helps remove trapped air from the hydraulic steering system during installation or service procedures.

Why is bleeding hydraulic steering important?
Proper bleeding removes trapped air that can cause soft steering feel, inconsistent response, or steering noise.

What steering systems is this compatible with?
It is compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar systems.

Can this be used for new steering installations?
Yes. Bleeding is required during most new hydraulic steering installations and cylinder replacements.

Is this useful for DIY steering service?
Yes. This bleed kit helps simplify the steering bleeding process for both professional technicians and DIY boat owners.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

350-BLEEDKIT, hydraulic steering bleed kit, hydraulic cylinder bleed kit, Pro Marine bleed kit, SeaStar bleed kit, Uflex bleed kit, steering cylinder bleed hose, hydraulic steering service kit, hydraulic steering maintenance tools, steering bleed fittings

Item#:
350-BLEEDKIT
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
66.22
Each
Item#:
350-HSTEER-ROD
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
318.27
Each
This item is discontinued
All Uflex Steering Systems
Item#:
X82
Manufacturer Item:
X82
Manufacturer:
Uflex
Available:
In Stock
Your Price:
218.43
Each
Item#:
92072
Manufacturer:
Universal
Available:
Special Order
Your Price:
28.60
Each
This item is discontinued
Mercury Johnson / Evinrude Same as 546-1
Item#:
311227
Cross Reference#:
0175226
0398327
0777714
134301
134301
164941
164941
175226
175226
18-7830
18-7830
275000051
3852224
3852224
398327
40155
65W-24251-00-00
65W-24251-10-00
777714
816296BK2
816296B1
816296B2
816296K2
816296Q1
816296Q2
816296T1
8162961
Manufacturer Item:
816296Q2
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
8.39
Each
|◀ ◀ 733 - 744 of 1065 ▶ ▶|
View: