Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Suzuki Outboard Parts

Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.

Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Suzuki Outboard Parts by System

Find the Correct Suzuki Outboard Part

Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Suzuki Outboard Engine Families

Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.

  • Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
  • Inline Four-Cylinder: common DF70 through DF140 engine families
  • Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
  • High-Horsepower Offshore: DF300, DF325, and DF350 platforms
  • FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications

Common Suzuki Outboard Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
  • Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
  • Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Suzuki Outboard Parts from Pro Marine USA?

  • OEM Suzuki and aftermarket replacement options for many common applications.
  • Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Suzuki outboard part?

Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.

Can I search Suzuki parts by OEM part number?

Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Suzuki outboard parts vary by model and year?

Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.

Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?

Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.

Do you carry both OEM and aftermarket Suzuki parts?

Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.

What Suzuki outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 169 - 180 of 1065 ▶ ▶|
View:
Suzuki v6 150hp 175hp 200hp
Item#:
3117SS
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
165.69
Each
Suzuki v6 150hp 175hp 200hp
Item#:
3117S2
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
165.69
Each
Suzuki v6 150hp 175hp 200hp
Item#:
3117PS
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
165.69
Each
Suzuki v6 150hp 175hp 200hp
Item#:
3117P2
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
165.69
Each
Suzuki v6 225hp EFI 87-03
Item#:
3187P4
Manufacturer:
Suzuki
Available:
In Stock
Your Price:
207.82
Each
Suzuki v6 225hp EFI 87-03
Item#:
3187S4
Manufacturer:
Suzuki
Available:
In Stock
Your Price:
75.00
Each
4 Stroke Outboards Including DF75AT and DF100BT - OEM 11141-87L00

Pro Marine Aftermarket Suzuki Engine Components

Pro Marine Cylinder Head Gasket for Suzuki DF70A DF75AT DF80A DF90A and DF100BT 4-Stroke Outboards

The Pro Marine 8714 Cylinder Head Gasket is an aftermarket replacement for select Suzuki 70 HP, 75 HP, 80 HP, 90 HP, and 100 HP 4-stroke outboard engines. It replaces Suzuki OEM part number 11141-87L00.

Compatible applications include select Suzuki DF70A, DF75AT, DF80A, DF90A, and DF100BT engine configurations. The supplied application data includes DF70A, DF80A, and DF90A catalog listings beginning in 2009, along with later model variations listed through 2026.

The cylinder head gasket seals the mating surfaces between the engine block and cylinder head. It helps maintain combustion chamber compression while separating the engine's cooling water and lubrication passages.

Important: Confirm your Suzuki engine model, serial number, and original OEM gasket number before ordering. Not every Suzuki 70-100 HP outboard uses the same cylinder head gasket.

Product Information

  • Pro Marine Part Number: 8714
  • Brand: Pro Marine Aftermarket
  • Product Type: Cylinder Head Gasket
  • Replaces Suzuki OEM: 11141-87L00
  • Engine Manufacturer: Suzuki
  • Engine Type: 4-Stroke Outboard
  • Horsepower: 70 HP, 75 HP, 80 HP, 90 HP, and 100 HP
  • Engine Families: DF70A, DF75AT, DF80A, DF90A, DF100BT
  • Additional Listed Variations: DF70AT, DF70ATH, DF80AT, DF90AT, DF90ATH, and DF90AWQH
  • Catalog Applications: Select Models Listed from 2009 Through 2026
  • Installation Location: Between Cylinder Head and Engine Block
  • Condition: New

OEM and Cross Reference Numbers

Pro Marine 8714 is an aftermarket replacement for Suzuki OEM cylinder head gasket 11141-87L00.

Manufacturer Part Number Description
Pro Marine 8714 Aftermarket Cylinder Head Gasket
Suzuki OEM 11141-87L00 Cylinder Head Gasket Cross Reference

When searching by the original Suzuki part number, this gasket may also be entered without hyphens as 1114187L00.

What This Part Is Used For

The cylinder head gasket is installed between the cylinder head and engine block of compatible Suzuki 4-stroke outboard engines.

Its primary purpose is to seal the combustion chambers while maintaining separation between the engine's cooling water passages and lubrication passages.

A properly installed head gasket helps maintain cylinder compression and prevents combustion gases, cooling water, and engine oil from leaking across the engine's sealing surfaces.

Common Repair Applications

  • Suzuki DF70A 70 HP cylinder head repairs
  • Suzuki DF75AT 75 HP cylinder head repairs
  • Suzuki DF80A 80 HP cylinder head repairs
  • Suzuki DF90A 90 HP cylinder head repairs
  • Suzuki DF100BT 100 HP cylinder head repairs
  • Replacement of a damaged or leaking head gasket
  • Engine repairs requiring cylinder head removal
  • Internal engine rebuilding and service
  • Repairs following a confirmed cylinder head sealing failure

Important Fitment Note

Pro Marine 8714 replaces Suzuki OEM 11141-87L00 for the listed engine models and serial configurations.

Suzuki used multiple engine families and model variations across its 70-100 HP 4-stroke outboard lineup. Horsepower alone is not sufficient to identify the correct head gasket.

The compatibility tables below preserve the supplied engine family information, catalog model variations, and serial references to help identify the correct application.

Always verify Suzuki OEM 11141-87L00 against the engine's original parts diagram before ordering.

Compatible Suzuki Outboard Applications

Pro Marine 8714 is listed for select Suzuki 70 HP, 75 HP, 80 HP, 90 HP, and 100 HP 4-stroke outboard engines.

The following tables group the supplied application data into customer-readable engine families while retaining important model and serial distinctions.

Suzuki DF70A - 70 HP 4-Stroke

Engine Model Listed Catalog Applications Serial References
DF70A 2009, 2010, and 2015 listings 07003F-210001
07003F-310001
08002F-210001
08002F-310001
09003F-210001
09003F-310001
710001
DF70AT 2020-2022 and 2024-2026 variants 07003F-040001
07003F-440001
07003F-540001
07003F-640001
DF70ATH 2020-2022 and 2024 variants 07003F-440001

Suzuki DF75AT - 75 HP 4-Stroke

Engine Model Listed Catalog Applications Serial References
DF75AT 2024-2026 variants 07501F-440001
07003F-540001
07501F-540001
07501F-640001

DF75AT Note: The supplied 2025 fitment data contains both 07003F-540001 and 07501F-540001. Both references are retained here; verify the correct application against the engine serial number.

Suzuki DF80A - 80 HP 4-Stroke

Engine Model Listed Catalog Applications Serial References
DF80A 2009, 2010, and 2015 listings 07003F-210001
07003F-310001
08002F-210001
08002F-310001
09003F-210001
09003F-310001
710001
DF80AT 2020-2022 and 2024-2026 variants 08002F-440001
08002F-540001
08002F-640001

Suzuki DF90A - 90 HP 4-Stroke

Engine Model Listed Catalog Applications Serial References
DF90A 2009, 2010, and 2015 listings 07003F-210001
07003F-310001
08002F-210001
08002F-310001
09003F-210001
09003F-310001
710001
DF90AT 2020-2022 and 2024-2026 variants 09003F-040001
09003F-440001
09003F-540001
09003F-640001
DF90ATH 2020-2022 and 2024 variants 09003F-440001
DF90AWQH 2021-2022 and 2024-2026 variants 09003F-440001
09003F-540001
09003F-640001

Suzuki DF100BT - 100 HP 4-Stroke

Engine Model Listed Catalog Applications Serial References
DF100BT 2020-2022 and 2024-2026 variants 10004F-440001
10004F-540001
10004F-640001

Additional Suzuki Model Identifiers

The supplied catalog fitment includes the following model-specific identifiers:

  • DF100BT: 020, 021, 022, 024, 025, 026
  • DF70AT: 020, 021, 022, 024, 025, 026
  • DF70ATH: 020, 021, 022, 024
  • DF75AT: 024, 025, 026
  • DF80AT: 020, 021, 022, 024, 025, 026
  • DF90AT: 020, 021, 022, 024, 025, 026
  • DF90ATH: 020, 021, 022, 024
  • DF90AWQH: 021, 022, 024, 025, 026

These identifiers help distinguish the listed catalog applications. Always confirm the correct part using the engine model and serial number.

Common Symptoms of a Failed Head Gasket

A damaged cylinder head gasket can allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

Depending on the location and severity of the failure, symptoms may include:

  • Loss of cylinder compression
  • Engine overheating
  • Cooling water entering the combustion chamber
  • Water contamination in engine oil
  • Rough running or engine misfires
  • Reduced engine power
  • Difficulty starting
  • Combustion gases entering the cooling system
  • Visible damage to the original head gasket
Diagnostic Reminder

These symptoms may also result from other engine problems. Perform appropriate diagnostic testing before determining that the cylinder head gasket requires replacement.

Installation and Service Tips

Cylinder head gasket replacement requires removal of the cylinder head and inspection of the engine's sealing surfaces. Follow the applicable Suzuki service manual for your exact engine model.

Recommended Installation Practices

  • Confirm the original Suzuki OEM gasket number 11141-87L00.
  • Verify the engine model and serial number.
  • Allow the engine to cool completely before disassembly.
  • Remove the cylinder head according to the Suzuki service manual.
  • Inspect the cylinder head and engine block sealing surfaces.
  • Check for warpage, corrosion, cracks, and other damage.
  • Remove old gasket material without damaging the sealing surfaces.
  • Keep debris out of the cylinders, oil passages, and cooling passages.
  • Install the replacement gasket in the correct orientation.
  • Follow Suzuki specifications for cylinder head fastener tightening.
  • Use the specified tightening sequence and service procedure.
  • Replace additional seals or fasteners when required by the service manual.
  • Inspect the cooling system for conditions that may have caused the original failure.
  • Check engine operation and cooling performance after reassembly.

Important Cylinder Head Installation Warning

Proper gasket installation requires correct surface preparation, inspection of the cylinder head, and the appropriate fastener tightening procedure.

Do not install a new head gasket over warped, cracked, or improperly prepared sealing surfaces. Improper installation can result in compression loss, cooling water leakage, overheating, and engine damage.

Key Features and Benefits

  • Pro Marine Aftermarket Replacement: Alternative to Suzuki OEM cylinder head gasket 11141-87L00.
  • 70-100 HP Suzuki Applications: Listed for select DF70A, DF75AT, DF80A, DF90A, and DF100BT engines.
  • 4-Stroke Engine Repair Component: Intended for compatible cylinder head repairs and engine rebuilding.
  • Combustion Chamber Sealing: Provides the gasket interface between the cylinder head and engine block.
  • Cooling and Lubrication Passage Sealing: Helps maintain separation between internal engine passages.
  • OEM Cross Reference: Suzuki 11141-87L00 for straightforward parts identification.
  • Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM number does Pro Marine 8714 replace?

Pro Marine 8714 replaces Suzuki OEM 11141-87L00, a cylinder head gasket used in select Suzuki 4-stroke outboard engines.

Does this gasket fit Suzuki DF70A outboards?

Yes. It is listed for select Suzuki DF70A 70 HP 4-stroke engines, including the DF70A, DF70AT, and DF70ATH applications shown in the fitment table.

Does this gasket fit Suzuki DF75 outboards?

The supplied fitment includes specific DF75AT 75 HP applications from 2024-2026. Compatibility with other DF75 configurations should not be assumed.

Does this gasket fit Suzuki DF80A outboards?

Yes. It is listed for select Suzuki DF80A 80 HP 4-stroke engines, including DF80A and DF80AT applications.

Does this gasket fit Suzuki DF90A outboards?

Yes. It is listed for select Suzuki DF90A 90 HP 4-stroke engines, including DF90A, DF90AT, DF90ATH, and DF90AWQH configurations.

Does this gasket fit Suzuki DF100BT outboards?

Yes. It is listed for select Suzuki DF100BT 100 HP 4-stroke applications, including the catalog variants shown in the compatibility table.

Will this gasket fit every Suzuki 70-100 HP outboard?

No. This gasket is intended for the listed engine models using Suzuki OEM 11141-87L00. Other Suzuki 70-100 HP engines may require different head gaskets.

What does a cylinder head gasket do?

The cylinder head gasket seals the connection between the cylinder head and engine block. It helps maintain compression while separating combustion, cooling, and lubrication passages.

What are symptoms of a blown Suzuki head gasket?

Possible symptoms include loss of compression, overheating, rough running, water intrusion, and engine oil contamination. Proper diagnostic testing is required to confirm the cause.

Can a failed head gasket cause overheating?

Yes. A failed head gasket can interfere with proper combustion and cooling system sealing. However, overheating can also result from other cooling system problems.

Should the head gasket be replaced when removing the cylinder head?

Yes. Install a new compatible head gasket when reassembling the engine following cylinder head removal.

Is Pro Marine 8714 a genuine Suzuki OEM gasket?

No. Pro Marine 8714 is an aftermarket replacement for Suzuki OEM 11141-87L00.

Can I install this head gasket myself?

Cylinder head gasket replacement requires engine disassembly, inspection of sealing surfaces, and proper tightening procedures. Professional installation is recommended.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

  • Free shipping on orders over $100 within the continental United States.
  • In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
  • Shipping options available through UPS, USPS, and FedEx.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Eligible returns are accepted within 30 days.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 8714 is the correct cylinder head gasket for your Suzuki outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

8714, 11141-87L00, 1114187L00

Searchable Terms

Pro Marine 8714, Suzuki 11141-87L00, Suzuki 1114187L00, Suzuki head gasket, Suzuki cylinder head gasket, Suzuki DF70A head gasket, Suzuki DF70AT head gasket, Suzuki DF70ATH head gasket, Suzuki DF75AT head gasket, Suzuki DF80A head gasket, Suzuki DF80AT head gasket, Suzuki DF90A head gasket, Suzuki DF90AT head gasket, Suzuki DF90ATH head gasket, Suzuki DF90AWQH head gasket, Suzuki DF100BT head gasket, Suzuki 70HP head gasket, Suzuki 75HP head gasket, Suzuki 80HP head gasket, Suzuki 90HP head gasket, Suzuki 100HP head gasket, Suzuki 70-100 HP head gasket, Suzuki 4 stroke head gasket, Suzuki outboard cylinder head gasket, Suzuki outboard engine gasket, Suzuki DF70A engine rebuild, Suzuki DF80A engine rebuild, Suzuki DF90A engine rebuild, Suzuki DF100BT engine rebuild, Suzuki outboard engine repair, Suzuki cylinder head repair, Suzuki blown head gasket repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts

Item#:
8714
Cross Reference#:
11141-87L00
Manufacturer Item:
11141-87L00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
86.51
Each
Suzuki DF200-DF300HP 2011-New
Item#:
9310
Cross Reference#:
15410-93J10
15410-93J11
Manufacturer Item:
15410-93J11
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
102.99
Each
Pro Marine Aftermarket Cylinder Head Gasket for Suzuki 2010-Present

Pro Marine Aftermarket Suzuki Engine Components

Pro Marine Cylinder Head Gasket for Suzuki DF40A DF50A and DF60A 4-Stroke Outboards

The Pro Marine 8841 Cylinder Head Gasket is an aftermarket replacement for select Suzuki DF40A, DF50A, and DF60A 40-60 HP 4-stroke outboard engines. It replaces Suzuki OEM part number 11141-88L00.

The cylinder head gasket seals the mating surfaces between the engine block and cylinder head. It helps maintain proper combustion chamber sealing while separating the engine's combustion, cooling, and lubrication passages.

This replacement gasket is intended for compatible Suzuki 40 HP, 50 HP, and 60 HP 4-stroke outboards, including the DF40A, DF50A, and DF60A engine families and their listed model variations.

Important: Confirm your engine model, serial number, and original Suzuki OEM gasket number before ordering. Suzuki used different engine configurations across its outboard lineup.

Product Information

  • Pro Marine Part Number: 8841
  • Brand: Pro Marine Aftermarket
  • Product Type: Cylinder Head Gasket
  • Replaces Suzuki OEM: 11141-88L00
  • Engine Manufacturer: Suzuki
  • Engine Type: 4-Stroke Outboard
  • Horsepower: 40 HP, 50 HP, and 60 HP
  • Engine Families: DF40A, DF50A, DF60A
  • Applications: Listed model and serial configurations
  • Installation Location: Between Cylinder Head and Engine Block
  • Condition: New

OEM and Cross Reference Numbers

Pro Marine 8841 is an aftermarket replacement for the following Suzuki OEM cylinder head gasket.

Brand Part Number Description
Pro Marine 8841 Aftermarket Cylinder Head Gasket
Suzuki OEM 11141-88L00 Cylinder Head Gasket

What This Part Is Used For

The cylinder head gasket is installed between the cylinder head and engine block of a Suzuki 4-stroke outboard engine.

Its primary function is to create a seal between the two engine components while maintaining separation between the combustion chambers, coolant passages, and engine oil passages.

A properly functioning head gasket helps maintain cylinder compression and prevents combustion pressure, cooling water, and engine oil from leaking into areas where they do not belong.

Common Applications

  • Suzuki DF40A 40 HP 4-stroke cylinder head repairs
  • Suzuki DF50A 50 HP 4-stroke cylinder head repairs
  • Suzuki DF60A 60 HP 4-stroke cylinder head repairs
  • Replacement of a leaking or damaged cylinder head gasket
  • Engine repairs involving cylinder head removal
  • Engine rebuilding and internal engine service
  • Repairs following a confirmed cylinder head sealing failure

Important Fitment Note

Pro Marine 8841 replaces Suzuki OEM 11141-88L00 for the listed DF40A, DF50A, and DF60A applications.

Suzuki model designations can include additional letters identifying different engine configurations and equipment. Serial number prefixes and production ranges are also important when identifying the correct engine parts.

The compatibility information below is organized by engine family and model variation rather than repeating every catalog entry.

Before ordering, verify that your engine's parts diagram identifies Suzuki 11141-88L00 as the required cylinder head gasket.

Compatible Suzuki Outboard Applications

Pro Marine 8841 is listed for select Suzuki DF40A, DF50A, and DF60A 4-stroke outboard engines.

The following tables group the supplied Suzuki application data into readable engine families, model variations, and catalog years.

Suzuki DF40A - 40 HP 4-Stroke

Engine Family Listed Applications Fitment Details
DF40A 2010 and 2015 catalog listings Standard DF40A applications, including listed serial configurations ending in 210001, 510001, and 710001.
DF40AQH Listed 2020-2022 and 2024-2025 catalog variants QH configurations, including serial prefixes 04003F-440001, 04003F-540001, and 04003F-640001.
DF40AST Listed 2020-2022 and 2024-2025 catalog variants ST configurations, including serial prefixes 04004F-440001, 04004F-540001, and 04004F-640001.
DF40ASVT Listed 2020-2022 and 2024-2025 catalog variants SVT configurations, including serial prefixes 04005F-440001, 04005F-540001, and 04005F-640001.
DF40AT Listed 2020-2022 and 2024-2025 catalog variants T configurations, including serial prefixes 04003F-040001, 04003F-440001, 04003F-540001, and 04003F-640001.
DF40ATH Listed 2020-2022 and 2024 catalog variants TH configurations, including serial prefix 04003F-440001.

Suzuki DF50A - 50 HP 4-Stroke

Engine Family Listed Applications Fitment Details
DF50A 2010 and 2015 catalog listings Standard DF50A applications, including listed serial configurations ending in 210001, 510001, and 710001.
DF50AT Listed 2020-2022 and 2024-2025 catalog variants T configurations, including serial prefixes 05003F-040001, 05003F-440001, 05003F-540001, and 05003F-640001.
DF50ATH Listed 2020-2022 and 2024 catalog variants TH configurations, including serial prefix 05003F-440001.
DF50AVT Listed 2020-2022 and 2024-2025 catalog variants VT configurations, including serial prefixes 05004F-040001, 05004F-440001, 05004F-540001, and 05004F-640001.
DF50AVTH Listed 2020 catalog variant VTH configuration. Verify the specific engine serial number.

Suzuki DF60A - 60 HP 4-Stroke

Engine Family Listed Applications Fitment Details
DF60A 2010 and 2015 catalog listings Standard DF60A applications, including listed serial configurations ending in 210001, 510001, and 710001.
DF60AQH Listed 2020-2022 and 2024-2025 catalog variants QH configurations, including serial prefixes 06002F-440001, 06002F-540001, and 06002F-640001.
DF60AT Listed 2020-2022 and 2024-2025 catalog variants T configurations, including serial prefixes 06002F-040001, 06002F-440001, 06002F-540001, and 06002F-640001.
DF60ATH Listed 2020-2022 and 2024 catalog variants TH configurations, including serial prefix 06002F-440001.
DF60AVT Listed 2020-2022 and 2024-2025 catalog variants VT configurations, including serial prefixes 06003F-040001, 06003F-440001, 06003F-540001, and 06003F-640001.
DF60AVTH Listed 2020-2022 and 2024 catalog variants VTH configurations, including serial prefix 06003F-440001.

Understanding Suzuki DF40A DF50A and DF60A Fitment

DF40A: Suzuki 40 HP 4-stroke outboard engine family.

DF50A: Suzuki 50 HP 4-stroke outboard engine family.

DF60A: Suzuki 60 HP 4-stroke outboard engine family.

Additional Model Letters: QH, ST, SVT, T, TH, VT, and VTH identify variations within the listed Suzuki engine families.

Serial Number Verification: Suzuki parts catalogs use model designations and serial number information to identify compatible components. Confirm the correct gasket using your engine's model and serial number.

Common Symptoms of a Failed Head Gasket

A damaged cylinder head gasket can allow combustion pressure, cooling water, or engine oil to leak between engine passages.

Symptoms depend on the location and severity of the gasket failure. The following conditions may indicate a head gasket problem.

  • Loss of engine compression
  • Engine overheating
  • Cooling water entering a combustion chamber
  • Water contamination in engine oil
  • Unexplained loss of engine power
  • Rough running or misfiring
  • Difficulty starting
  • Combustion gases entering the cooling system
  • Visible gasket damage during cylinder head removal
Important Diagnostic Note

These symptoms can also be caused by other engine problems. Perform appropriate diagnostic testing before concluding that the cylinder head gasket requires replacement.

Installation and Service Tips

Cylinder head gasket replacement requires removal of the cylinder head and inspection of the engine's sealing surfaces. Follow the applicable Suzuki service manual for the exact engine model.

Recommended Installation Practices

  • Confirm Suzuki OEM gasket number 11141-88L00.
  • Verify the engine model and serial number.
  • Allow the engine to cool completely before disassembly.
  • Remove the cylinder head following the Suzuki service manual.
  • Inspect the cylinder head and engine block sealing surfaces.
  • Check for warpage, corrosion, cracks, or other damage.
  • Remove old gasket residue without damaging sealing surfaces.
  • Keep debris out of cylinders, oil passages, and cooling passages.
  • Install the new gasket in the correct orientation.
  • Follow Suzuki specifications for cylinder head fasteners and tightening sequence.
  • Replace additional seals or fasteners when required by the service procedure.
  • Inspect the cooling system and address the original cause of overheating or gasket failure.
  • Check engine operation and cooling performance after reassembly.

Important Cylinder Head Installation Warning

Cylinder head gasket replacement requires correct surface preparation, fastener tightening procedures, and inspection of the cylinder head.

Do not reuse a damaged gasket or install a replacement over warped, cracked, or improperly prepared sealing surfaces. Improper installation can cause compression loss, coolant leakage, overheating, and engine damage.

Key Features and Benefits

  • Pro Marine Aftermarket Replacement: Alternative to Suzuki OEM cylinder head gasket 11141-88L00.
  • 40-60 HP Suzuki Applications: Listed for select DF40A, DF50A, and DF60A 4-stroke outboards.
  • Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
  • Combustion Chamber Sealing: Provides the required gasket interface between the cylinder head and engine block.
  • Cooling and Lubrication Passage Sealing: Helps maintain separation between combustion, cooling, and lubrication passages.
  • OEM Cross Reference: Suzuki 11141-88L00 for easier parts identification.
  • Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM part number does Pro Marine 8841 replace?

Pro Marine 8841 replaces Suzuki OEM 11141-88L00, a cylinder head gasket used in select Suzuki DF40A, DF50A, and DF60A applications.

Does this head gasket fit Suzuki DF40A outboards?

Yes. It is listed for select Suzuki DF40A 40 HP 4-stroke engines, including the DF40A, DF40AQH, DF40AST, DF40ASVT, DF40AT, and DF40ATH model families.

Does this head gasket fit Suzuki DF50A outboards?

Yes. It is listed for select Suzuki DF50A 50 HP 4-stroke engines, including DF50A, DF50AT, DF50ATH, DF50AVT, and DF50AVTH configurations.

Does this head gasket fit Suzuki DF60A outboards?

Yes. It is listed for select Suzuki DF60A 60 HP 4-stroke engines, including DF60A, DF60AQH, DF60AT, DF60ATH, DF60AVT, and DF60AVTH configurations.

What years does Suzuki 11141-88L00 fit?

The supplied application information includes Suzuki DF40A, DF50A, and DF60A catalog listings beginning in 2010, with additional model variations listed through 2025. Exact fitment depends on the engine model and serial number.

Will this gasket fit every Suzuki 40 HP, 50 HP, or 60 HP outboard?

No. This gasket is intended for the listed Suzuki DF40A, DF50A, and DF60A applications using OEM 11141-88L00. Other Suzuki engine families may use different head gaskets.

What does a cylinder head gasket do?

The head gasket seals the joint between the engine block and cylinder head. It helps maintain combustion chamber pressure while separating coolant and lubrication passages.

What are common symptoms of a blown head gasket?

Possible symptoms include compression loss, overheating, rough running, cooling water entering the combustion chamber, or water contamination in engine oil. Proper testing is required to confirm a gasket failure.

Can a damaged head gasket cause overheating?

Yes. A failed head gasket can disrupt proper sealing and cooling system operation. However, overheating may also result from other cooling system problems.

Should I replace the head gasket after removing the cylinder head?

Yes. When the cylinder head is removed, a new compatible head gasket should be installed during reassembly.

Is this a genuine Suzuki OEM head gasket?

No. This is a Pro Marine aftermarket replacement for Suzuki OEM 11141-88L00.

Can I install this head gasket myself?

Cylinder head gasket replacement requires engine disassembly, inspection of sealing surfaces, and proper tightening procedures. Professional installation is recommended.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

  • Free shipping on orders over $100 within the continental United States.
  • In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
  • Shipping options available through UPS, USPS, and FedEx.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Eligible returns are accepted within 30 days.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 8841 is the correct cylinder head gasket for your Suzuki DF40A, DF50A, or DF60A, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

8841, 11141-88L00, 1114188L00

Searchable Terms

Pro Marine 8841, Suzuki 11141-88L00, Suzuki cylinder head gasket, Suzuki head gasket, Suzuki DF40A head gasket, Suzuki DF50A head gasket, Suzuki DF60A head gasket, Suzuki DF40AQH head gasket, Suzuki DF40AST head gasket, Suzuki DF40ASVT head gasket, Suzuki DF40AT head gasket, Suzuki DF40ATH head gasket, Suzuki DF50AT head gasket, Suzuki DF50ATH head gasket, Suzuki DF50AVT head gasket, Suzuki DF50AVTH head gasket, Suzuki DF60AQH head gasket, Suzuki DF60AT head gasket, Suzuki DF60ATH head gasket, Suzuki DF60AVT head gasket, Suzuki DF60AVTH head gasket, Suzuki 40HP head gasket, Suzuki 50HP head gasket, Suzuki 60HP head gasket, Suzuki 4 stroke head gasket, Suzuki outboard cylinder head gasket, Suzuki outboard engine gasket, Suzuki 40 50 60 HP head gasket, Suzuki engine rebuild parts, Suzuki outboard engine repair, Suzuki blown head gasket repair, Suzuki cylinder head repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts

Item#:
8841
Cross Reference#:
11141-88L00
Manufacturer Item:
11141-88L00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
65.87
Each
Aftermarket Low Pressure Fuel Filter Replacing Suzuki 15410-88L00

Pro Marine Suzuki-Style Fuel Filter

Aftermarket Low Pressure Fuel Filter for Suzuki DF40A-DF60A Outboards

This Pro Marine fuel filter is an aftermarket replacement for Suzuki OEM part number 15410-88L00, commonly used on select Suzuki DF40A, DF50A, and DF60A FourStroke outboards.

The fuel filter helps trap dirt, debris, and fuel system contaminants before they reach sensitive fuel delivery components, helping support clean fuel flow and reliable engine operation.

Compatible Applications

Engine Range Engine Type System Application Notes
Suzuki DF40A FourStroke Fuel System 2010-Present models using OEM fuel filter 15410-88L00
Suzuki DF50A FourStroke Fuel System 2010-Present models using OEM fuel filter 15410-88L00
Suzuki DF50AV FourStroke Fuel System Select models using OEM fuel filter 15410-88L00
Suzuki DF60A FourStroke Fuel System 2010-Present models using OEM fuel filter 15410-88L00
Suzuki DF60AV FourStroke Fuel System Select models using OEM fuel filter 15410-88L00
Fitment Note: This Pro Marine filter replaces Suzuki OEM fuel filter 15410-88L00 and is commonly listed for Suzuki DF40A, DF50A, and DF60A applications from 2010-Present, with DF50AV and DF60AV applications depending on model and fuel system configuration.

Always verify your Suzuki model, serial number, and fuel system diagram before ordering fuel filters and fuel system service parts.

OEM Part Numbers & Cross References

Brand / Type Part Number
Pro Marine 79949P
Replaces Suzuki OEM 15410-88L00
Alternate Search Format 1541088L00

OEM Suzuki Option

Prefer the genuine factory Suzuki filter? See the OEM Suzuki Fuel Filter for the original equipment version.

What This Fuel Filter is Used For

This Pro Marine fuel filter is used in compatible Suzuki outboard fuel systems to help remove contaminants from fuel before they can reach downstream fuel system components.

Clean fuel delivery is important for smooth idle quality, acceleration, injector protection, and reliable starting.

A restricted or contaminated fuel filter may contribute to hesitation, poor running, reduced fuel flow, or fuel system performance issues.

Replacing the fuel filter during routine maintenance helps protect the fuel system and support dependable outboard performance.

Key Features and Benefits

  • Pro Marine aftermarket fuel filter
  • Replaces Suzuki OEM part number 15410-88L00
  • Fits select Suzuki DF40A, DF50A, DF50AV, DF60A, and DF60AV outboards
  • Helps filter dirt, debris, and fuel system contaminants
  • Supports clean fuel flow to the engine
  • Common replacement during routine fuel system maintenance
  • Aftermarket alternative to the OEM Suzuki fuel filter
  • Sold individually

Fuel Filter Details

  • Brand: Pro Marine
  • Part Type: Fuel Filter
  • Pro Marine Part Number: 79949P
  • Replaces OEM: Suzuki 15410-88L00
  • Application: Suzuki DF40A / DF50A / DF50AV / DF60A / DF60AV Fuel Systems
  • System: Fuel Delivery System
  • Use: Fuel filtration
  • Quantity Sold: Each

FAQ

What does Pro Marine 79949P replace?
Pro Marine 79949P replaces Suzuki OEM fuel filter part number 15410-88L00.

What engines does this fuel filter fit?
This filter fits select Suzuki DF40A, DF50A, DF50AV, DF60A, and DF60AV outboards using the 15410-88L00 fuel filter.

Is this the OEM Suzuki filter?
No. This is the Pro Marine aftermarket replacement version. The OEM Suzuki fuel filter is available separately.

What does this fuel filter do?
It helps filter contaminants from fuel before they reach sensitive engine fuel system components.

When should I replace my fuel filter?
Fuel filters are commonly replaced during routine maintenance or whenever fuel restriction, contamination, or performance issues are suspected.

Should I verify fitment before ordering?
Yes. Suzuki used different fuel system layouts depending on model and production range, so serial number and diagram verification are recommended.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Fuel system components should be installed only after confirming correct fitment.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

79949P, 15410-88L00, 1541088L00, Suzuki fuel filter, Pro Marine fuel filter, Suzuki DF40A fuel filter, Suzuki DF50A fuel filter, Suzuki DF50AV fuel filter, Suzuki DF60A fuel filter, Suzuki DF60AV fuel filter, Suzuki low pressure fuel filter, Suzuki outboard fuel filter, Suzuki fuel system filter, DF40A replacement fuel filter, DF60A replacement fuel filter

Item#:
79949P
Cross Reference#:
15410-88L00
Manufacturer Item:
15410-88L00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
12.00
Each
Suzuki 150-225 HP OEM
Item#:
9263
Cross Reference#:
09263-22030
09263-22045
09263-22053
09263-22063
Manufacturer Item:
09263-22063
Manufacturer:
Suzuki
Available:
In Stock
Your Price:
29.86
Each
Item#:
025
Cross Reference#:
14151-95600
14151-95611
Manufacturer Item:
14151-95611
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.38
Each
|◀ ◀ 169 - 180 of 1065 ▶ ▶|
View: