S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
Suzuki Outboard Parts
Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.
Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.
Shop Suzuki Outboard Parts by System
- Control Cables & Boxes
- Cooling System
- Electrical System
- Engine Oil
- Fuel & Carburetion System
- Intake System
- Internal Engine Components
- Lower Unit Components
- Oiling System
- Paints
- Service & Oil Change Kits
- Service Manuals
- Steering Systems
- Transom & Midsection
- Trim System
Find the Correct Suzuki Outboard Part
Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.
Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.
Use Our OEM Parts Lookup »Common Suzuki Outboard Engine Families
Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.
- Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
- Inline Four-Cylinder: common DF70 through DF140 engine families
- Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
- High-Horsepower Offshore: DF300, DF325, and DF350 platforms
- FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications
Common Suzuki Outboard Repair Areas
- Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
- Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
- Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
- Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
- Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
- Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.
Why Buy Suzuki Outboard Parts from Pro Marine USA?
- OEM Suzuki and aftermarket replacement options for many common applications.
- Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
- Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions
How do I find the correct Suzuki outboard part?
Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.
Can I search Suzuki parts by OEM part number?
Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
Do Suzuki outboard parts vary by model and year?
Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.
Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?
Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.
Do you carry both OEM and aftermarket Suzuki parts?
Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.
What Suzuki outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.
Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.
Replacement Hydraulic Steering Cylinder
Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder
The Pro Marine 350-HSTEER-CYL Hydraulic Steering Cylinder is the replacement steering cylinder used with the Pro Marine 350-HSTEER hydraulic steering system. It is designed for high-horsepower single outboard setups where smooth, controlled steering response is critical.
This is the cylinder only. Helm pump, hoses, steering fluid, and fill/bleed accessories are sold separately unless purchased as part of the complete 350-HSTEER system.
What This Cylinder Is Used For
The steering cylinder converts hydraulic pressure from the helm pump into side-to-side movement at the outboard engine. It is the component that physically moves the engine when you turn the steering wheel.
If your current cylinder is leaking, damaged, binding, or worn, replacing it can restore proper steering control and improve the overall feel of the system.
Read our 350-HSTEER Steering Comparison & Pro Tips Guide
Best Applications
| Application | Recommended Use |
|---|---|
| 350-HSTEER Systems | Replacement hydraulic steering cylinder |
| Single Outboards up to 350HP | High-horsepower hydraulic steering applications |
| Bass Boats | Responsive steering and control at speed |
| Bay Boats | Smooth steering in shallow and open water |
| Center Consoles | Reliable steering feel for offshore and coastal use |
Build or Service Your Steering System
Complete Steering Kit
Need the full system instead of just the cylinder? The complete kit includes the cylinder, helm pump, hydraulic fluid, and fill hose assembly.
View 350-HSTEER Complete KitHelm Pump
Pair this cylinder with the matching Pro Marine helm pump for proper hydraulic steering operation.
View 350-HELM-025 Helm PumpHydraulic Hoses
Select the correct hydraulic hose length for your boat, jack plate, setback, and rigging route.
Shop Pro Marine Hydraulic HosesFluid & Fill Hose
Hydraulic fluid and a fill hose assembly help make installation and bleeding easier during service.
View PRO-OIL15 Hydraulic FluidView 102P Fill Hose Assembly
Complete Your Steering Setup
Need additional Pro Marine steering components?
Key Features and Benefits
- Replacement hydraulic steering cylinder for 350-HSTEER systems
- Designed for high-horsepower single outboard steering applications
- Helps restore smooth steering movement and control
- Front-mount hydraulic steering cylinder design
- Works with hydraulic helm, hose, and fluid circuit
- Good option for service, repair, or steering system rebuilds
System Function and Connections
- System Type: Hydraulic outboard steering
- Component Type: Steering cylinder
- Connection Type: Hydraulic hose connections to helm circuit
- Typical Use: Single outboard applications up to 350HP when used with the proper system
- Related Components: Helm pump, hydraulic hoses, steering fluid, fittings, and fill/bleed tools
FAQ
Is this the complete steering system?
No. This listing is for the hydraulic steering cylinder only. The complete
system is available as the Pro Marine 350-HSTEER kit.
What system does this cylinder work with?
This cylinder is designed for use with the Pro Marine 350-HSTEER hydraulic
steering system.
Are hydraulic hoses included?
No. Hydraulic hoses are sold separately so you can choose the correct length
for your boat and rigging layout.
When should I replace a steering cylinder?
Replace the cylinder if it is leaking, damaged, binding, corroded, or no
longer holding proper steering control.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
350-HSTEER-CYL, Pro Marine hydraulic steering cylinder, hydraulic steering cylinder, outboard steering cylinder, front mount steering cylinder, 350-HSTEER replacement cylinder, hydraulic steering repair, boat steering cylinder