Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Suzuki Outboard Parts

Shop OEM and aftermarket Suzuki outboard parts for DF-series FourStroke engines. Find repair, service, lower unit, fuel and engine rebuild parts.

Pro Marine USA carries Suzuki outboard engine parts for maintenance, troubleshooting, repair, and complete rebuild projects. Browse parts by engine system, or use your model, horsepower, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Suzuki Outboard Parts by System

Find the Correct Suzuki Outboard Part

Suzuki outboard parts can vary by model, horsepower, production range, and engine family. If you are unsure which component fits your engine, use the OEM parts lookup to locate the original Suzuki part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available genuine Suzuki and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Suzuki Outboard Engine Families

Pro Marine supports many popular Suzuki DF-series outboards across a wide horsepower range. Always confirm the exact engine model and identification information before ordering parts.

  • Portable and Midrange: Suzuki DF2.5 through DF60 FourStroke applications
  • Inline Four-Cylinder: common DF70 through DF140 engine families
  • Mid- and High-Horsepower: DF150, DF175, DF200, DF225, and DF250 applications
  • High-Horsepower Offshore: DF300, DF325, and DF350 platforms
  • FourStroke EFI: electronically fuel-injected Suzuki outboards across most modern DF-series applications

Common Suzuki Outboard Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, cooling passages, pressure-control components, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, filters, injectors, spark plugs, ignition components, sensors, and intake sealing.
  • Charging or electrical problems: inspect ignition coils, rectifier/regulators, sensors, wiring, grounds, and charging-system components.
  • Low compression or power loss: inspect pistons, rings, cylinder condition, valves, bearings, gaskets, and internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Suzuki Outboard Parts from Pro Marine USA?

  • OEM Suzuki and aftermarket replacement options for many common applications.
  • Parts for routine maintenance, professional repair, complete engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of Suzuki service kits, engine parts, lower unit components, cooling parts, and fuel system products.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Suzuki outboard part?

Start with the engine model, horsepower, production information, and any available serial or identification numbers. Use the OEM parts lookup to identify the original Suzuki part number whenever possible.

Can I search Suzuki parts by OEM part number?

Yes. Enter the Suzuki OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Suzuki outboard parts vary by model and year?

Yes. Suzuki may use different components across engines with similar horsepower depending on model, engine family, and production range. Confirm the complete engine identification information before ordering.

Do you carry parts for Suzuki DF300, DF325, and DF350 outboards?

Yes. Pro Marine carries parts for many Suzuki high-horsepower DF-series applications, including routine maintenance, cooling, fuel, electrical, internal engine, lower unit, steering, and trim components.

Do you carry both OEM and aftermarket Suzuki parts?

Yes. Pro Marine offers genuine Suzuki parts along with aftermarket replacement parts for many common Suzuki outboard maintenance, repair, and rebuild applications.

What Suzuki outboard parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Suzuki parts can vary by model, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 577 - 588 of 1065 ▶ ▶|
View:
Bore Size 3.110
Item#:
3110TD
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
54.95
Each
Bore Size 3.484
Item#:
3484KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Johnson/Evinrude Bore Size 3.854
Item#:
3854KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Bore Size 2.834
Item#:
2834KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Bore Size 2.598
Item#:
2598CD
Manufacturer:
Wiseco
Available:
In Stock
50.7800
Your Price:
49.95
Each
Bore Size 3.110
Item#:
3110LK
Manufacturer:
Wiseco
Available:
Out of Stock
65.1900
Your Price:
59.95
Each
Bore Size 2.953
Item#:
2953TD
Manufacturer:
Wiseco
Available:
Out of Stock
Your Price:
54.95
Each
Bore Size 2.775
Item#:
2775KD
Manufacturer:
Wiseco
Available:
In Stock
51.2700
Your Price:
49.95
Each
Wiseco 4-Stroke 3.711" Bore
Item#:
9425XX
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
35.09
Each
For Single 700-Hsteer cylinder
Item#:
700-TIEBAR-S
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
268.40
Each
For Twin 700-Hsteer cylinders
Item#:
700-TIEBAR-D
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
296.49
Each
Pro Series Hydraulic Steering Cylinder for 700HSTEER Systems

Pro Series Hydraulic Steering Cylinder

Pro Marine 700HSTEER-CYL Hydraulic Steering Cylinder

The Pro Marine 700HSTEER-CYL Hydraulic Steering Cylinder is a Pro Series hydraulic steering ram designed for high-performance marine outboard steering applications.

This steering cylinder is designed for use with the Pro Marine 700HSTEER hydraulic steering system and helps deliver smooth, controlled steering response for demanding marine applications.

What a Hydraulic Steering Cylinder Does

The hydraulic steering cylinder is the component mounted at the outboard engine that physically turns the engine when hydraulic pressure is applied from the helm pump.

As the steering wheel is turned, hydraulic fluid moves through the steering hoses into the cylinder, extending or retracting the steering ram to control engine direction. Steering cylinder sizing and construction play a major role in steering feel, control, and system durability.

Pro Tip: Hydraulic steering cylinders should always be matched with compatible helm pumps, hoses, fittings, and steering system components to ensure proper steering response and safe operation.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Best Applications

Application Recommended Use
High-Performance Outboards Pro Series hydraulic steering cylinder applications
Offshore Boats Controlled hydraulic steering in demanding water conditions
Performance Setups Responsive steering control for higher-speed operation
Repower Projects Replacement hydraulic steering cylinder installations
Marine Repair Shops Professional hydraulic steering service work

Complete or Service Your Steering System

700HSTEER Steering System

Pair this cylinder with the complete Pro Marine 700HSTEER hydraulic steering system.

View 700HSTEER Steering System

Hydraulic Hoses

Select the proper hydraulic steering hose length for your boat layout, setback, and rigging route.

Shop Pro Marine Hydraulic Hoses

End Cap Kit

Service the steering cylinder using the compatible 700-ENDCAP replacement kit.

View 700-ENDCAP

Hydraulic Steering Fluid

Use quality hydraulic steering fluid during installation, filling, and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Key Features and Benefits

  • Pro Series hydraulic steering cylinder design
  • Designed for the Pro Marine 700HSTEER system
  • Helps provide smooth and controlled steering response
  • Built for demanding marine steering applications
  • Good choice for performance and offshore boats
  • Compatible service parts available from Pro Marine
  • Designed for hydraulic outboard steering systems
  • Aftermarket Pro Marine steering component

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Hydraulic steering cylinder
  • Part Number: 700HSTEER-CYL
  • OEM or Aftermarket: Aftermarket
  • Manufacturer: Pro Marine
  • Connection Type: Hydraulic steering hose fittings
  • Typical Use: High-performance marine steering systems
  • Compatible System: Pro Marine 700HSTEER
  • Related Components: Helm pumps, hydraulic hoses, fittings, steering fluid, and bleed kits

FAQ

What does the 700HSTEER-CYL steering cylinder do?
The steering cylinder converts hydraulic pressure into steering movement that turns the outboard engine.

What steering system is this cylinder designed for?
This cylinder is designed for the Pro Marine 700HSTEER hydraulic steering system.

Is this an OEM or aftermarket steering cylinder?
This product is listed as an aftermarket Pro Marine steering component.

Can this cylinder be serviced?
Yes. Compatible service components including the 700-ENDCAP kit are available for maintenance and repairs.

Is this cylinder suitable for performance boats?
Yes. The 700HSTEER-CYL is designed for demanding hydraulic steering applications including performance and offshore boats.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

700HSTEER-CYL, hydraulic steering cylinder, Pro Marine steering cylinder, Pro Series steering ram, outboard steering cylinder, marine hydraulic steering cylinder, offshore steering cylinder, performance steering ram, aftermarket steering cylinder, 700HSTEER cylinder

Item#:
700HSTEER-CYL
Manufacturer:
Pro Marine
Available:
In Stock
 
Heavy
Your Price:
931.54
Each
|◀ ◀ 577 - 588 of 1065 ▶ ▶|
View: