S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Evinrude Johnson 40-300HP SHOWA Tilt Trim Seal Kit 4519P
| Quantity | Price |
| 1 | 92.95 |
Pro Marine SHOWA Tilt & Trim Seal Kit
Evinrude Johnson 40-300HP SHOWA Tilt & Trim Seal Kit - 4519P
The Pro Marine 4519P Tilt & Trim Seal Kit is an aftermarket replacement seal kit for compatible SHOWA hydraulic power trim and tilt assemblies used on a very wide range of Johnson, Evinrude, OMC, and BRP outboards.
This kit replaces OEM numbers 0434519, 434519, 0778218, and 778218. Verified applications extend from select 40HP through 300HP engines and include conventional 2-stroke models, Ficht / FFI engines, direct-injection and E-TEC families, 3.3L and 3.4L V6 engines, and later Evinrude G2 2.7L V6 applications.
Compatible Applications
| Engine Family | Verified Application Range |
|---|---|
| Johnson / Evinrude 40-90HP | Select 40, 50, 60, 65, 70, 75, 88, and 90HP outboards using compatible SHOWA trim and tilt assemblies. |
| Johnson / Evinrude 100-140HP | Select 100, 105, 115, 120, 125, 130, 135, and 140HP models including standard, commercial, jet, Ficht / FFI, and later direct-injection configurations. |
| Johnson / Evinrude 150-185HP | Extensive 150, 175, and 185HP coverage including standard, counter-rotation, commercial, military, Ficht / FFI, H.O., and multiple shaft-length configurations. |
| Johnson / Evinrude 200-225HP | Extensive 200 and 225HP applications including 60-degree V6, 90-degree V6 3.3L, Ficht / RAM Injection, H.O., counter-rotation, and 20", 25", and 30" shaft configurations. |
| Evinrude 250HP | Select 250HP 90-degree V6 3.3L and 3.4L applications including standard, H.O., Ficht / RAM Injection, counter-rotation, and multiple shaft lengths. |
| Evinrude 300HP | Select 300HP 90-degree V6 3.4L applications in standard, counter-rotation, and multiple shaft-length configurations. |
| Evinrude Ficht / FFI | Numerous 75-250HP Ficht Fuel Injection and FFI applications are included in the verified model list. |
| Evinrude E-TEC / Direct Injection | Numerous later direct-injection applications including 60-degree V6, 3.3L V6, and 3.4L V6 model families. |
| Evinrude G2 2.7L V6 | Select G2 150HP, 175HP, and 200HP 66-degree 2.7L V6 applications, including standard and counter-rotation configurations. |
This seal kit has an extremely broad application range, but not every Johnson or Evinrude engine uses the same trim and tilt unit.
Verify the complete engine model number and confirm that the SHOWA trim / tilt assembly calls for OEM seal kit 0434519, 434519, 0778218, or 778218 before ordering.
Notable Fitment Families
- Johnson and Evinrude 40-90HP outboards
- Johnson and Evinrude 100-140HP outboards
- Johnson and Evinrude 150-175HP V6 outboards
- Johnson and Evinrude 200-225HP V6 outboards
- Select Evinrude 250HP 3.3L and 3.4L V6 models
- Select Evinrude 300HP 3.4L V6 models
- Ficht / FFI fuel-injected applications
- Ficht RAM Injection applications
- Evinrude E-TEC / direct-injection applications
- Evinrude H.O. applications
- Standard and counter-rotation models
- 20", 25", and 30" shaft configurations where listed
- Commercial and select military applications
- Evinrude G2 150, 175, and 200HP 2.7L V6 applications
OEM & Cross Reference Numbers
| Brand / Type | Part Number |
|---|---|
| Pro Marine | 4519P |
| OMC / BRP OEM | 0434519 |
| OMC / BRP OEM | 434519 |
| OMC / BRP OEM | 0778218 |
| OMC / BRP OEM | 778218 |
OEM BRP / OMC Version Available
OEM BRP / OMC 434519 SHOWA Tilt & Trim Seal Kit
Prefer the original factory seal kit? The OEM 434519 SHOWA tilt and trim seal kit is available for the same compatible applications.
What This Part is Used For
The power trim and tilt unit uses hydraulic pressure to raise, lower, trim, and tilt the outboard. Internal seals and O-rings keep hydraulic fluid contained while allowing the trim and tilt pistons to move under pressure.
Over time, hydraulic seals can harden, flatten, tear, or wear. A leaking SHOWA trim unit may lose fluid, slowly allow the engine to settle down after being trimmed up, or fail to maintain the selected trim position.
The Pro Marine 4519P seal kit provides an aftermarket option for rebuilding compatible SHOWA hydraulic trim and tilt assemblies instead of replacing the complete trim unit.
Common Signs Your Trim & Tilt Unit Needs Service
- Hydraulic fluid leaking around trim or tilt cylinder rods
- Engine slowly settles down after being trimmed or tilted up
- Trim system will not hold the selected position
- Repeated need to add trim / tilt fluid
- Visible fluid around the SHOWA hydraulic assembly
- Old rod seals appear cracked, flattened, or deteriorated
Why Choose the Pro Marine 4519P?
- Pro Marine aftermarket SHOWA trim and tilt seal kit
- Lower-cost alternative to the OEM 434519 seal kit
- Replaces OEM numbers 0434519, 434519, 0778218, and 778218
- Extensive Johnson, Evinrude, OMC, and BRP application coverage
- Fits select applications from 40HP through 300HP
- Coverage includes conventional, Ficht / FFI, E-TEC, and G2 engine families
- Used on compatible SHOWA hydraulic power trim and tilt assemblies
- Helps repair hydraulic leaks without replacing the complete trim unit
- OEM 434519 version linked above
FAQ
What does Pro Marine 4519P replace?
Pro Marine 4519P replaces OEM numbers 0434519, 434519, 0778218,
and 778218.
What engines does 4519P fit?
It fits a very large number of Johnson, Evinrude, OMC, and BRP outboards
equipped with compatible SHOWA trim and tilt assemblies. Verified
applications range from select 40HP engines through 300HP models.
Does it fit older Johnson and Evinrude models?
Yes. The verified fitment includes numerous engines from the early and
late 1990s as well as later BRP / Evinrude applications.
Does it fit Ficht and FFI engines?
Yes. Numerous Ficht / FFI and Ficht RAM Injection applications are
included in the supplied fitment.
Does it fit Evinrude E-TEC models?
Yes. Numerous direct-injection Evinrude model families are included in the
verified application list.
Does 4519P fit Evinrude G2 engines?
Yes. Verified applications include select G2 150HP, 175HP, and 200HP
66-degree 2.7L V6 models.
Does it fit 250HP and 300HP Evinrude engines?
Yes. The supplied fitment includes numerous 250HP 3.3L / 3.4L and 300HP
3.4L V6 model numbers.
Is this an OEM seal kit?
No. This is the Pro Marine aftermarket version. The OEM
BRP / OMC 434519 seal kit is linked above.
How should I verify fitment?
Use your complete Johnson / Evinrude model number and verify that the SHOWA
trim and tilt assembly calls for one of the OEM numbers listed above.
Horsepower alone is not enough to identify the correct seal kit.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
4519P, Pro Marine 4519P, 434519, 0434519, 0778218, 778218, OMC 434519, BRP 434519, Evinrude SHOWA seal kit, Johnson SHOWA seal kit, Evinrude tilt trim seal kit, Johnson tilt trim seal kit, SHOWA hydraulic seal kit, Evinrude trim cylinder seals, Johnson trim cylinder seals, Evinrude power trim repair kit, Johnson power trim repair kit, 40HP Evinrude trim seal kit, 90HP Evinrude trim seal kit, 115HP Evinrude trim seal kit, 150HP Evinrude trim seal kit, 175HP Evinrude trim seal kit, 200HP Evinrude trim seal kit, 225HP Evinrude trim seal kit, 250HP Evinrude trim seal kit, 300HP Evinrude trim seal kit, Evinrude Ficht trim seal kit, Evinrude E-TEC trim seal kit, Evinrude G2 trim seal kit, aftermarket 434519 seal kit