S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Yamaha 25-300 HP Trim and Tilt Switch - 69J82563P
| Quantity | Price |
| 1 | 40.00 |
69J82563P Yamaha 25-300 HP Trim and Tilt Switch
The Pro Marine 69J82563P Trim and Tilt Switch is an aftermarket replacement for select Yamaha outboards using the 69J and related 704-series trim switch assemblies.
This switch is used across select Yamaha 25-300 HP 2-stroke and 4-stroke applications, including F, LF, T, VF, VZ, Z, and LZ engine families. Exact model and year verification is still required before ordering.
Product Information
- Pro Marine Part Number: 69J82563P
- Brand: Pro Marine
- Part Type: Power Trim and Tilt Switch
- General Fitment: Select Yamaha 25-300 HP
- Engine Types: Select 2-Stroke and 4-Stroke Applications
- Primary OEM Reference: 69J-82563-00-00
- Superseding Yamaha Reference: 69J-82563-01-00
- OEM Version Available: Yamaha 69J-82563-00-00
Important Fitment Note
This switch does not fit every Yamaha outboard from 25-300 HP. The horsepower range is a summary of the supplied Yamaha application data.
Yamaha used different trim and tilt switches depending on model year, engine family, control arrangement, and rigging configuration.
Always verify your complete Yamaha engine model or original trim-switch part number before ordering.
OEM and Cross Reference Numbers
| Part Number | Relationship |
|---|---|
| 69J82563P | Pro Marine Aftermarket |
| 69J-82563-00-00 | Yamaha OEM Reference |
| 69J-82563-01-00 | Yamaha OEM - Supersedes 69J-82563-00-00 |
| 704-82563-40-00 | Earlier Yamaha Reference |
| 704-82563-41-00 | Earlier Yamaha Reference |
| 704-82563-42-00 | Later Yamaha 704-Series Reference |
Yamaha OEM 69J-82563-00-00 Trim and Tilt Switch
Prefer genuine Yamaha OEM? Pro Marine USA also carries the Yamaha version of this trim and tilt switch. Yamaha 69J-82563-00-00 has been superseded by 69J-82563-01-00.
What This Part is Used For
The trim and tilt switch provides the operator input used to raise or lower the outboard through the compatible Yamaha power trim and tilt system.
It is commonly replaced when the original switch becomes damaged, intermittent, corroded, or no longer reliably commands one or both trim directions.
Compatible Yamaha Applications
The supplied Yamaha application data has been grouped below into customer-readable engine families and year ranges.
| Engine Family | Years | Engine Type |
|---|---|---|
| F25 / T25 | 2006-Present | 4-Stroke |
| F40 | 2006-Present | 4-Stroke |
| F50 / T50 | 2006-Present | 4-Stroke |
| F60 / T60 | 2006-Present | 4-Stroke |
| F70 | 2006-Present | 4-Stroke |
| F115 / LF115 / VF115 | 2006-Present | 4-Stroke |
| F130 / LF130 | 2006-Present | 4-Stroke |
| F150 / LF150 / FL150 | 2004-Present | 4-Stroke |
| VF150 | 2006-Present | 4-Stroke |
| F175 / VF175 | 2006-Present | 4-Stroke |
| F200 / LF200 | 2002-Present | 4-Stroke |
| VF200 | 2006-Present | 4-Stroke |
| VZ200 | 2005-Present | 2-Stroke HPDI |
| F225 / LF225 | 2002-Present | 4-Stroke |
| VF225 | 2006-Present | 4-Stroke |
| VZ225 | 2003-Present | 2-Stroke HPDI |
| F250 / LF250 | 2005-Present | 4-Stroke |
| VF250 | 2006-Present | 4-Stroke |
| VZ250 | 2003-Present | 2-Stroke HPDI |
| Z250 / LZ250 | 2003-Present | 2-Stroke HPDI |
| F300 / LF300 | 2006-Present | 4-Stroke |
| VZ300 | 2004-Present | 2-Stroke HPDI |
| Z300 / LZ300 | 2004-Present | 2-Stroke HPDI |
Common Symptoms and Replacement Reasons
- Trim or tilt does not respond when the switch is pressed.
- UP or DOWN function operates intermittently.
- One direction works while the other does not.
- Switch housing or button is damaged.
- Wiring or connector at the original switch is damaged or corroded.
- Water intrusion has caused unreliable switch operation.
A non-operating trim system is not always caused by the switch. Wiring, connectors, relays, fuses, battery voltage, and the trim motor should also be checked during diagnosis.
Installation Tips
- Disconnect battery power before servicing the trim and tilt electrical system.
- Compare the replacement switch and connector with the original part before installation.
- Inspect nearby wiring and terminals for corrosion or damage.
- Route wiring so it cannot be pinched, stretched, or chafed.
- After installation, verify both UP and DOWN trim functions.
Key Features and Benefits
- Pro Marine Brand: Aftermarket replacement for listed Yamaha applications.
- Broad Application Coverage: Select Yamaha 25-300 HP 2-stroke and 4-stroke outboards.
- OEM Cross References: Replaces multiple Yamaha 69J and 704-series trim-switch numbers.
- UP and DOWN Control: Provides trim and tilt switch input on compatible systems.
- OEM Version Available: Genuine Yamaha alternative is also available from Pro Marine USA.
Frequently Asked Questions
What does Pro Marine 69J82563P fit?
It fits select Yamaha 25-300 HP 2-stroke and 4-stroke outboards, including specific F, LF, T, VF, VZ, Z, and LZ model families.
Does it fit every Yamaha 25-300 HP outboard?
No. The horsepower range is only a general fitment summary. Exact engine model and original trim-switch configuration must be verified.
Does 69J82563P replace Yamaha 69J-82563-00-00?
Yes. 69J-82563-00-00 is one of the primary Yamaha OEM references for this part.
What supersedes Yamaha 69J-82563-00-00?
Yamaha 69J-82563-01-00 supersedes the earlier 69J-82563-00-00 number.
Is a genuine Yamaha version available?
Yes. Pro Marine USA also carries the Yamaha OEM trim and tilt switch .
If my engine will not trim, is the switch definitely bad?
No. Trim problems can also be caused by relays, wiring, connectors, fuses, battery voltage, or the trim motor. The circuit should be tested before replacing parts.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
69J82563P, 69J-82563-00-00, 69J-82563-01-00, 704-82563-40-00, 704-82563-41-00, 704-82563-42-00, 69J825630000, 69J825630100, 704825634000, 704825634100, 704825634200
Searchable Terms
Yamaha 25-300 HP trim switch, Yamaha trim and tilt switch, Yamaha power trim switch, Yamaha 2-stroke trim switch, Yamaha 4-stroke trim switch, Yamaha HPDI trim switch, Yamaha F150 trim switch, Yamaha F200 trim switch, Yamaha F225 trim switch, Yamaha F250 trim switch, Yamaha F300 trim switch, Yamaha VZ250 trim switch, 69J-82563-00-00 replacement, 69J-82563-01-00 replacement, Pro Marine 69J82563P