Pro Marine 9214 Head Gasket Suzuki DF100A DF115A DF140 100-140 HP

Pro Marine Aftermarket Suzuki and Johnson Evinrude Engine Components

Pro Marine Cylinder Head Gasket for Suzuki DF100A DF115A DF140 DF140A and Johnson Evinrude 140 HP Outboards

The Pro Marine 9214 Cylinder Head Gasket is an aftermarket replacement for select Suzuki DF100A, DF115A, DF140, and DF140A 4-stroke outboard engines, along with compatible Johnson and Evinrude 140 HP 4-stroke outboards.

This replacement head gasket cross references Suzuki OEM part numbers 11141-92J00 and 11141-92J01, as well as Johnson Evinrude BRP OEM numbers 5033908 and 5034644.

The cylinder head gasket is installed between the engine block and cylinder head. It provides the sealing interface required to maintain combustion chamber compression while separating the engine's cooling and lubrication passages.

Applications include earlier Suzuki DF140, DF140T, and DF140Z engines listed from 2002-2010, later Suzuki DF100A, DF115A, and DF140A engine configurations, and the specific Johnson Evinrude 140 HP models listed below.

Important: Verify the original OEM head gasket number and your engine model and serial number before ordering. Not every Suzuki 100-140 HP or Johnson Evinrude 140 HP outboard uses this gasket.

Product Information

• Pro Marine Part Number: 9214
• Brand: Pro Marine Aftermarket
• Product Type: Cylinder Head Gasket
• Suzuki OEM Cross References: 11141-92J00, 11141-92J01
• Johnson Evinrude BRP Cross References: 5033908, 5034644
• Engine Manufacturers: Suzuki, Johnson, Evinrude
• Engine Type: 4-Stroke Outboard
• Suzuki Horsepower: 100 HP, 115 HP, and 140 HP
• Johnson Evinrude Horsepower: 140 HP
• Suzuki Engine Families: DF100A, DF115A, DF140, DF140A
• Additional Suzuki Variations: DF100AT, DF115AST, DF115AT, DF115AZ, DF115ST, DF140T, DF140Z, DF140AT, DF140AZ
• Earlier Suzuki DF140 Applications: 2002-2010
• Later Suzuki Applications: Listed DF100A, DF115A, and DF140A configurations
• Installation Location: Between Cylinder Head and Engine Block
• Condition: New

OEM and Cross Reference Numbers

Pro Marine 9214 is an aftermarket replacement for the following Suzuki and Johnson Evinrude cylinder head gasket part numbers.

These numbers are provided to help identify the correct replacement when searching by Suzuki, Johnson, Evinrude, or BRP original equipment part numbers.

What This Part Is Used For

The cylinder head gasket creates a seal between the cylinder head and engine block of a compatible 4-stroke outboard engine.

It helps maintain combustion chamber pressure while separating cooling water, engine oil, and combustion passages.

A damaged head gasket may allow combustion gases or engine fluids to leak across sealing surfaces, potentially resulting in compression loss, overheating, or internal engine contamination.

Common Repair Applications

• Suzuki DF100A 100 HP cylinder head repairs
• Suzuki DF115A 115 HP cylinder head repairs
• Suzuki DF140 140 HP cylinder head repairs
• Suzuki DF140A 140 HP cylinder head repairs
• Johnson 140 HP 4-stroke cylinder head repairs
• Evinrude 140 HP 4-stroke cylinder head repairs
• Replacement of damaged or leaking head gaskets
• Engine repairs requiring cylinder head removal
• Internal engine rebuilding and service

Important Fitment Note

Pro Marine 9214 replaces the listed Suzuki and Johnson Evinrude OEM head gasket numbers.

Suzuki DF140 engines from the earlier 2002-2010 applications are listed separately from the later DF140A engine family. The supplied compatibility data also includes select DF100A and DF115A applications.

Suzuki model letters and serial number references help distinguish engine configurations. Compatibility should be confirmed using the exact engine identification information.

Do not assume compatibility with every Suzuki 100 HP, 115 HP, or 140 HP engine or every Johnson Evinrude 140 HP outboard. Verify the required OEM gasket number.

Compatible Outboard Applications

The following tables organize the supplied Suzuki and Johnson Evinrude fitment into readable engine families and model groups.

Suzuki DF100A - 100 HP 4-Stroke

Suzuki DF115A - 115 HP 4-Stroke

Suzuki DF140 - 140 HP 4-Stroke - 2002-2010

The earlier Suzuki DF140 engine family includes the standard DF140 and the listed DF140T and DF140Z variations.

Suzuki DF140A - 140 HP 4-Stroke

The supplied application data also includes the later Suzuki DF140A engine family, with a 2013 catalog listing and additional model and serial configurations.

Johnson and Evinrude 140 HP 4-Stroke Outboards

Pro Marine 9214 is also listed for the following Johnson and Evinrude 140 HP 4-stroke engine model numbers.

The model numbers are grouped to make identification easier while preserving the supplied application references.

Common Symptoms of a Failed Head Gasket

A damaged cylinder head gasket may allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

Possible symptoms include:

• Loss of cylinder compression
• Engine overheating
• Cooling water entering a combustion chamber
• Water contamination in engine oil
• Rough running or misfiring
• Reduced engine power
• Difficulty starting
• Combustion gases entering the cooling system
• Visible damage to the original head gasket

Installation and Service Tips

Cylinder head gasket replacement requires removal of the cylinder head and inspection of the engine's sealing surfaces. Follow the applicable Suzuki or Johnson Evinrude service manual for the exact engine model.

Recommended Installation Practices

• Confirm the original Suzuki or BRP OEM gasket number.
• Verify the engine model and serial number.
• Allow the engine to cool completely before disassembly.
• Remove the cylinder head according to the applicable service manual.
• Inspect the cylinder head and engine block sealing surfaces.
• Check for warpage, corrosion, cracks, and other damage.
• Remove old gasket material without damaging the sealing surfaces.
• Keep debris out of cylinders, oil passages, and cooling passages.
• Install the replacement gasket in the correct orientation.
• Follow the manufacturer's specified tightening sequence and torque procedure.
• Replace additional seals or fasteners when required by the service manual.
• Inspect the cooling system for conditions that may have caused the original failure.
• Check engine operation and cooling performance after reassembly.

Key Features and Benefits

• Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and Johnson Evinrude OEM head gaskets.
• Suzuki 100-140 HP Applications: Listed for select DF100A, DF115A, DF140, and DF140A 4-stroke outboards.
• Johnson Evinrude Compatibility: Fits the specified 140 HP 4-stroke model applications.
• Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
• Combustion Chamber Sealing: Provides the gasket interface between the cylinder head and engine block.
• Cooling and Lubrication Passage Sealing: Helps maintain separation between internal engine passages.
• Multiple OEM Cross References: Suzuki 11141-92J00 and 11141-92J01, plus BRP 5033908 and 5034644.
• Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM part numbers does Pro Marine 9214 replace?

Pro Marine 9214 cross references Suzuki 11141-92J00 and 11141-92J01.

What Johnson Evinrude OEM numbers does this gasket replace?

This gasket cross references BRP 5033908 and 5034644.

Does this head gasket fit Suzuki DF100A outboards?

Yes. It is listed for select Suzuki DF100A 100 HP 4-stroke applications, including DF100A and DF100AT configurations.

Does this head gasket fit Suzuki DF115A outboards?

Yes. It is listed for select Suzuki DF115A 115 HP 4-stroke applications, including DF115A, DF115AST, DF115AT, and DF115AZ configurations. The supplied fitment also includes a DF115ST application.

Does this gasket fit Suzuki DF140 outboards from 2002-2010?

Yes. The supplied fitment includes Suzuki DF140, DF140T, and DF140Z 140 HP 4-stroke applications from 2002-2010.

Does this gasket fit Suzuki DF140A outboards?

Yes. It is listed for select Suzuki DF140A 140 HP 4-stroke applications, including DF140A, DF140AT, and DF140AZ configurations.

Does this gasket fit Johnson and Evinrude 140 HP outboards?

Yes. It is listed for the specific Johnson Evinrude 140 HP 4-stroke model numbers shown in the compatibility table.

Will this gasket fit every Suzuki 100-140 HP outboard?

No. Compatibility is limited to the listed engine models using the corresponding OEM head gasket numbers. Other Suzuki engine families may require different gaskets.

What does a cylinder head gasket do?

The cylinder head gasket seals the joint between the cylinder head and engine block. It helps maintain compression while separating combustion, cooling, and lubrication passages.

What are common symptoms of a blown head gasket?

Possible symptoms include compression loss, overheating, rough running, water intrusion, and engine oil contamination. Proper diagnostic testing is required to confirm the cause.

Should I replace the head gasket after removing the cylinder head?

Yes. Install a new compatible cylinder head gasket when reassembling the engine after cylinder head removal.

Is Pro Marine 9214 a genuine Suzuki or BRP OEM gasket?

No. Pro Marine 9214 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.

Can I install this head gasket myself?

Cylinder head gasket replacement requires engine disassembly, inspection of sealing surfaces, and proper tightening procedures. Professional installation is recommended.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 within the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
• Shipping options available through UPS, USPS, and FedEx.
• Typical delivery time is 1-5 business days.

30-Day Return Policy

• Eligible returns are accepted within 30 days.
• Parts must be new, unused, and in original packaging.
• Installed parts are not returnable.
• Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 9214 is the correct cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

9214, 11141-92J00, 11141-92J01, 1114192J00, 1114192J01, 5033908, 5034644

Searchable Terms

Pro Marine 9214, Suzuki 11141-92J00, Suzuki 11141-92J01, Suzuki 1114192J00, Suzuki 1114192J01, Johnson Evinrude 5033908, Johnson Evinrude 5034644, Suzuki head gasket, Suzuki cylinder head gasket, Suzuki DF100A head gasket, Suzuki DF100AT head gasket, Suzuki DF115A head gasket, Suzuki DF115AST head gasket, Suzuki DF115AT head gasket, Suzuki DF115AZ head gasket, Suzuki DF115ST head gasket, Suzuki DF140 head gasket, Suzuki DF140T head gasket, Suzuki DF140Z head gasket, Suzuki DF140A head gasket, Suzuki DF140AT head gasket, Suzuki DF140AZ head gasket, Suzuki 100HP head gasket, Suzuki 115HP head gasket, Suzuki 140HP head gasket, Suzuki 4 stroke head gasket, Suzuki 100-140 HP cylinder head gasket, Johnson 140HP head gasket, Evinrude 140HP head gasket, Johnson Evinrude 140HP 4 stroke, Johnson Evinrude cylinder head gasket, BRP head gasket, J140CX4SOR head gasket, J140CX4SRC head gasket, J140CX4STS head gasket, J140CX4SDA head gasket, J140PL4SOR head gasket, J140PL4SRC head gasket, J140PL4STS head gasket, J140PL4SDA head gasket, J140PX4SOR head gasket, J140PX4SRS head gasket, J140PX4STS head gasket, J140PX4SDA head gasket, BJ140CX4SRS head gasket, BJ140PL4SRS head gasket, BJ140PX4SRS head gasket, BJ140CX4SOC head gasket, BJ140PL4SOC head gasket, BJ140PX4SOC head gasket, BJ140CX4DR head gasket, BJ140L4SDR head gasket, BJ140X4SDR head gasket, Suzuki outboard engine repair, Suzuki cylinder head repair, Suzuki engine rebuild parts, Johnson Evinrude engine rebuild parts, aftermarket Suzuki head gasket, aftermarket Johnson Evinrude head gasket, Pro Marine Suzuki engine parts