Pro Marine 9314 STBD Head Gasket Suzuki DF200 DF225 DF250 V6 4 Stroke

Pro Marine Aftermarket Suzuki and Johnson Evinrude V6 Engine Components

Pro Marine Starboard Cylinder Head Gasket for Suzuki DF200 DF225 DF250 V6 4-Stroke Outboards

The Pro Marine 9314 Starboard Cylinder Head Gasket is an aftermarket replacement for the starboard (STBD) cylinder head on select Suzuki DF200, DF225, and DF250 200-250 HP V6 4-stroke outboard engines.

This gasket also fits the specified Johnson and Evinrude 200 HP and 225 HP 4-stroke V6 outboards listed in the compatibility tables below.

Pro Marine 9314 cross references Suzuki OEM 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, and 11141-93J10, along with BRP OEM 5034853, 5035938, and 5036629.

The gasket seals the starboard cylinder head to the engine block, helping maintain combustion chamber compression while separating cooling water and engine lubrication passages.

Important: This is the STARBOARD SIDE ONLY. The matching port-side cylinder head gasket is sold separately as Pro Marine 9324 .

Important: Starboard and Port Head Gaskets Are Different

Suzuki DF200, DF225, and DF250 V6 engines use separate cylinder head gaskets for the starboard and port cylinder banks.

• Starboard Side (STBD): Pro Marine 9314 - Suzuki OEM 11141-93J10
• Port Side (PORT): Pro Marine 9324 - Suzuki OEM 11142-93J10

These gaskets are not interchangeable. Confirm which cylinder bank is being serviced before ordering.

Product Information

• Pro Marine Part Number: 9314
• Brand: Pro Marine Aftermarket
• Product Type: Cylinder Head Gasket
• Cylinder Bank: Starboard (STBD)
• Primary Suzuki OEM Reference: 11141-93J10
• Additional Suzuki OEM References: 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03
• Johnson Evinrude BRP References: 5034853, 5035938, 5036629
• Engine Manufacturers: Suzuki, Johnson, Evinrude
• Engine Type: V6 4-Stroke Outboard
• Suzuki Horsepower: 200 HP, 225 HP, 250 HP
• Johnson Evinrude Horsepower: 200 HP, 225 HP
• Suzuki Engine Families: DF200, DF225, DF250
• Additional Suzuki Models: DF200T, DF200Z, DF225T, DF225Z, DF250T, DF250Z and listed DF250ST configurations
• Earlier Suzuki Applications: 2004-2010
• Additional Suzuki Catalog Listings: 2013, 2015, and specified later model variants
• Matching Port Gasket: Pro Marine 9324
• Condition: New

Matching Port Side Cylinder Head Gasket Available

Servicing both cylinder heads on your Suzuki DF200, DF225, or DF250 V6 outboard? The matching port-side gasket is available separately from Pro Marine USA.

Pro Marine 9324 - PORT Cylinder Head Gasket

Matching aftermarket port-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.

Suzuki OEM: 11142-93J10
Location: Port Cylinder Bank
Sold Separately

View Matching Port Head Gasket

Verify both gasket part numbers against your engine model and serial number. The starboard and port gaskets are purchased individually.

OEM and Cross Reference Numbers

Pro Marine 9314 replaces the following Suzuki and Johnson Evinrude starboard cylinder head gasket numbers.

What This Part Is Used For

The starboard cylinder head gasket seals the connection between the starboard cylinder head and engine block on compatible Suzuki and Johnson Evinrude V6 outboards.

It helps maintain combustion chamber compression and separates the cooling water and engine oil passages at the cylinder head sealing surface.

This gasket is used during repairs involving the starboard cylinder head, including head gasket replacement, cylinder head service, and compatible V6 engine rebuilding.

Common Repair Applications

• Suzuki DF200 V6 starboard cylinder head repairs
• Suzuki DF225 V6 starboard cylinder head repairs
• Suzuki DF250 V6 starboard cylinder head repairs
• Johnson 200 HP and 225 HP 4-stroke V6 repairs
• Evinrude 200 HP and 225 HP 4-stroke V6 repairs
• Replacement of a leaking or damaged starboard head gasket
• Engine repairs requiring starboard cylinder head removal
• Compatible V6 outboard engine rebuilding

Important Fitment Note

Pro Marine 9314 is a starboard-side cylinder head gasket for select Suzuki DF200, DF225, and DF250 V6 4-stroke outboards.

The supplied fitment includes earlier 2004-2010 Suzuki applications, additional 2013 and 2015 catalog listings, and specific later model variations identified by model suffixes and serial references.

Some DF250ST and other specialized DF250 configurations may use different cylinder head gaskets. Confirm OEM 11141-93J10 or another listed 11141-93J reference in the engine's specific parts diagram.

Do not order by horsepower alone. Verify the engine model, serial number, cylinder bank, and OEM gasket number.

Compatible Suzuki Outboard Applications

Pro Marine 9314 is listed for select Suzuki DF200, DF225, and DF250 200-250 HP V6 4-stroke outboards.

The following tables group the supplied engine fitment into readable model families while retaining the listed serial and catalog identifiers.

Suzuki DF200 - 200 HP V6 4-Stroke

Suzuki DF225 - 225 HP V6 4-Stroke

Suzuki DF250 - 250 HP V6 4-Stroke

Compatible Johnson and Evinrude Outboard Applications

Pro Marine 9314 also cross references BRP starboard head gasket numbers 5034853, 5035938, and 5036629.

The following Johnson Evinrude 200 HP and 225 HP 4-stroke models are included in the supplied fitment.

Common Symptoms of a Failed Cylinder Head Gasket

A damaged head gasket can allow combustion pressure, cooling water, or engine oil to leak between internal engine passages.

Possible symptoms include:

• Loss of cylinder compression
• Engine overheating
• Cooling water entering a combustion chamber
• Water contamination in engine oil
• Rough running or engine misfires
• Reduced engine performance
• Difficulty starting
• Combustion gases entering the cooling system
• Visible gasket damage during cylinder head removal

Installation and Service Tips

Cylinder head gasket replacement requires removal of the appropriate cylinder head and inspection of the engine's sealing surfaces. Follow the service manual for the exact engine model.

Recommended Installation Practices

• Verify the engine model and serial number.
• Confirm the starboard cylinder bank is being serviced.
• Confirm the required Suzuki or BRP OEM gasket number.
• Allow the engine to cool before disassembly.
• Remove the cylinder head according to the service manual.
• Inspect the cylinder head and engine block sealing surfaces.
• Check for warpage, corrosion, cracks, and other damage.
• Remove old gasket material without damaging the sealing surfaces.
• Keep debris out of the cylinders and internal passages.
• Install the replacement gasket in the correct orientation.
• Follow the manufacturer's specified tightening sequence and procedure.
• Replace additional seals or fasteners when required by the service manual.
• Inspect the cooling system for conditions that may have caused the original failure.
• Check engine operation and cooling performance after reassembly.

Key Features and Benefits

• Starboard-Specific Design: Intended for the starboard cylinder head on compatible V6 outboards.
• Pro Marine Aftermarket Replacement: Alternative to the listed Suzuki and BRP OEM starboard head gaskets.
• Suzuki 200-250 HP Applications: Listed for select DF200, DF225, and DF250 V6 4-stroke engines.
• Johnson Evinrude Compatibility: Listed for the specified 200 HP and 225 HP 4-stroke models.
• Engine Repair Component: Used during compatible cylinder head repairs and engine rebuilding.
• Combustion Chamber Sealing: Provides the gasket interface between the starboard cylinder head and engine block.
• Matching Port Gasket Available: Pro Marine 9324 is sold separately.
• Dealer Pricing Available: Qualified marine businesses can apply for wholesale pricing.

Frequently Asked Questions

What Suzuki OEM numbers does Pro Marine 9314 replace?

Pro Marine 9314 cross references 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, and 11141-93J10.

What Johnson Evinrude OEM numbers does this gasket replace?

The listed BRP cross references are 5034853, 5035938, and 5036629.

Is Pro Marine 9314 the starboard or port head gasket?

Pro Marine 9314 is the starboard (STBD) cylinder head gasket. It is not the port-side gasket.

What is the matching port-side head gasket?

The matching port-side gasket is Pro Marine 9324 , which cross references Suzuki OEM 11142-93J10.

Does this gasket fit Suzuki DF200 outboards?

Yes. It is listed for select Suzuki DF200 200 HP V6 4-stroke outboards, including DF200, DF200T, and DF200Z applications.

Does this gasket fit Suzuki DF225 outboards?

Yes. It is listed for select Suzuki DF225 225 HP V6 4-stroke outboards, including DF225, DF225T, and DF225Z applications.

Does this gasket fit Suzuki DF250 outboards?

Yes. It is listed for select Suzuki DF250 250 HP V6 4-stroke outboards, including DF250, DF250T, and DF250Z applications. DF250ST applications require additional OEM verification.

Does this gasket fit Johnson and Evinrude 200 HP and 225 HP outboards?

Yes. It is listed for the specific Johnson Evinrude 200 HP and 225 HP 4-stroke model numbers shown in the compatibility table.

Are the starboard and port head gaskets interchangeable?

No. The starboard and port cylinder banks use different head gaskets. Pro Marine 9314 is for the starboard side, while Pro Marine 9324 is for the port side.

Do I need both head gaskets for a V6 engine rebuild?

If both cylinder heads are removed during an engine rebuild, each cylinder bank requires its correct replacement gasket. The starboard and port gaskets are sold separately.

What are common symptoms of a blown head gasket?

Possible symptoms include compression loss, overheating, rough running, water intrusion, and engine oil contamination. Proper diagnostic testing is required to confirm the cause.

Is Pro Marine 9314 a genuine Suzuki OEM gasket?

No. Pro Marine 9314 is an aftermarket replacement for the listed Suzuki and Johnson Evinrude OEM part numbers.

Dealer Discounts & Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, cylinder head gaskets, internal engine components, rebuild parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.

Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 within the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday-Friday.
• Shipping options available through UPS, USPS, and FedEx.
• Typical delivery time is 1-5 business days.

30-Day Return Policy

• Eligible returns are accepted within 30 days.
• Parts must be new, unused, and in original packaging.
• Installed parts are not returnable.
• Return authorization is required before returning merchandise.

Need Help Confirming Head Gasket Fitment?

If you are unsure whether Pro Marine 9314 is the correct starboard cylinder head gasket for your Suzuki, Johnson, or Evinrude outboard, contact Pro Marine with your engine model and serial number.

Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

9314, 11141-93J00, 11141-93J01, 11141-93J02, 11141-93J03, 11141-93J10, 1114193J00, 1114193J01, 1114193J02, 1114193J03, 1114193J10, 5034853, 5035938, 5036629

Searchable Terms

Pro Marine 9314, Suzuki 11141-93J00, Suzuki 11141-93J01, Suzuki 11141-93J02, Suzuki 11141-93J03, Suzuki 11141-93J10, Johnson Evinrude 5034853, Johnson Evinrude 5035938, Johnson Evinrude 5036629, Suzuki starboard head gasket, Suzuki STBD head gasket, Suzuki right cylinder head gasket, Suzuki V6 cylinder head gasket, Suzuki DF200 head gasket, Suzuki DF200T head gasket, Suzuki DF200Z head gasket, Suzuki DF225 head gasket, Suzuki DF225T head gasket, Suzuki DF225Z head gasket, Suzuki DF250 head gasket, Suzuki DF250T head gasket, Suzuki DF250Z head gasket, Suzuki 200HP head gasket, Suzuki 225HP head gasket, Suzuki 250HP head gasket, Suzuki 200-250 HP head gasket, Suzuki 4 stroke head gasket, Suzuki outboard cylinder head gasket, Johnson 200HP head gasket, Johnson 225HP head gasket, Evinrude 200HP head gasket, Evinrude 225HP head gasket, Johnson Evinrude V6 head gasket, BRP starboard head gasket, J200CX4SRS head gasket, J200PX4SRS head gasket, J225CX4SRS head gasket, J225PX4SRS head gasket, BJ200CX4SDC head gasket, BJ200X4SDC head gasket, BJ225CX4SDC head gasket, BJ225X4SDC head gasket, BJ200CX4SO head gasket, BJ200PX4SO head gasket, BJ225CX4SO head gasket, BJ225PX4SO head gasket, J200CX4SOC head gasket, J200PX4SOC head gasket, J225CX4SOC head gasket, J225CZ4SOS head gasket, J225PX4SOC head gasket, J225PZ4SOS head gasket, Suzuki outboard engine rebuild, Suzuki V6 engine repair, Suzuki cylinder head repair, aftermarket Suzuki head gasket, Pro Marine Suzuki engine parts, Pro Marine 9324 matching port gasket