S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
25700-90J00
25700-90J01
5033798
25700-92J00
5033922
769712
87867
9-74110
Trim System
EMP Trim Cap & Seal Kit - 8985P
High-quality EMP aftermarket Trim Cap & Seal Kit for BRP E-Tec Inline 3 and V4 outboards.
Replaces OEM numbers 0769114 and 5008985. Excellent solution for common trim leaks and pressure loss.
Compatible Applications
BRP / E-Tec Inline 3 & V4 outboards. Verify with your engine model and serial number.
Common E-Tec Trim Pump Issues
- Fluid leaks around the trim cap — most common symptom of failed seals
- Trim drifts down after raising — pressure loss due to bad seals
- Pump runs but trim is slow or weak — air entering through worn seals
- Noisy or continuously running pump — low fluid from leaks
Replacing the cap and seals with this kit often resolves these issues.
Installation Guide
Tools Needed: Socket set, torque wrench, gasket scraper, clean rags.
- Let engine cool. Support the outboard and relieve hydraulic pressure.
- Remove the old trim cap and clean the mating surface thoroughly.
- Install new seals and cap. Torque to factory specifications.
- Refill hydraulic fluid and bleed the system if needed.
- Test trim operation and check for leaks.
Refer to your BRP service manual for model-specific details.
Important Fitment Note
Always confirm compatibility using your engine serial number and existing part number before ordering.
OEM & Cross Reference Numbers
| OEM (BRP / OMC) | 0769114, 5008985 |
| EMP Version | 8985P |
OEM Version
What This Part Is Used For
This kit replaces the trim cap and seals on the hydraulic trim system of BRP E-Tec outboards.
Prevents hydraulic fluid leaks and restores smooth trim operation.
Key Features and Benefits
- High-quality EMP aftermarket replacement
- Direct fit for E-Tec Inline 3 & V4 models
- Includes cap and complete seal set
- Restores proper hydraulic trim function
FAQ
What engines does this fit?
BRP E-Tec Inline 3 and V4 outboards. Verify with serial number.
What is the difference between 8985 and 8985P?
8985 is the OEM BRP part. 8985P is the EMP aftermarket version.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
EMP trim cap and seal kit, 8985P, E-Tec trim seals, 0769114, 5008985, BRP E-Tec cap kit
Searchable Part Numbers
8985P, 8985, 0769114, 5008985
Mercury 75-115 EFI 4 StrokeÂ
60C-24560-01-00
881538T02
881538T1
09-1028B
17937-0001
17937-0001-P
17937-0001P
179370001P
18-3038
18-3077
18-3077
18-30777
20799057
21422647
21951356
24139377
3838541
3841697
875593
877061
877061
877486
89550
DF200 2005-2011
DF225hp 2004-2020
DF250 2004-2022
DF300 2007 & Up
DF325 2024
DF350 2018 & Up
17413-93J01
17413-93J02
5035038
830749A01
87515
EMP Fuel Pump 892267E
The EMP 892267E Fuel Pump is a high-quality electric fuel pump designed for select Mercury, Honda, and Tohatsu 4-stroke outboards. This pump delivers consistent fuel pressure to the EFI system, supporting reliable starting and smooth engine performance.
Fitment Overview
This EMP fuel pump replaces multiple OEM part numbers including 898101T67, 892267A51, 16735-ZW5-003, and 16735-ZY3-004, along with Tohatsu equivalents such as 3AC043020, 3AC101500, and related variants.
These cross reference numbers are used across Mercury EFI outboards and Honda-based 4-stroke platforms that share similar electric fuel pump designs.
Compatibility
| Brand | Model / HP | Engine Type |
|---|---|---|
| Mercury | 25, 30, 40, 50, 60 HP | EFI 3 & 4 Cylinder 4-Stroke |
| Honda | BF75, BF90, BF115, BF130, BF150 | 4-Stroke EFI |
| Tohatsu | 25, 30, 40, 50, 60 HP | 4-Stroke EFI |
These engines use a similar electric fuel pump configuration across multiple model years.
Example Model Applications
- Mercury 25HP, 30HP, 40HP, 50HP, and 60HP EFI models
- Honda BF75, BF90, BF115, BF130, and BF150 models
- Tohatsu EFI outboards in the 25HP to 60HP range
These are common applications. Always verify using your OEM part number before ordering.
Fits These Serial Ranges
This fuel pump is used across multiple production years and does not follow a single serial-number break.
Important: Confirm compatibility by matching your existing fuel pump to one of the OEM numbers listed below.
Looking for this same fuel pump in other brands or configurations?
View Pro Marine Fuel Pump 892267P
View OEM Mercury Fuel Pump 898101T67
View OEM Mercury Fuel Pump Kit (with Seals & Filter)
Part Numbers and Cross References
| Type | Part Number |
|---|---|
| EMP | 892267E |
| Mercury OEM | 898101T67 |
| Mercury OEM | 892267A51 |
| Honda OEM | 16735-ZW5-003 |
| Honda OEM | 16735-ZY3-004 |
| Honda Alt | HZW516735003 |
| Honda Alt | HZY316735004 |
| Tohatsu OEM | 3AC043020 |
| Tohatsu OEM | 3AC043020M |
| Tohatsu OEM | 3AC043100M |
| Tohatsu OEM | 3AC101500 |
| Tohatsu OEM | 3AC101500M |
What This Part Is Used For
This electric fuel pump supplies pressurized fuel from the tank to the engine’s EFI system. It plays a critical role in maintaining proper fuel delivery for smooth engine operation.
- Maintains consistent fuel pressure
- Supports reliable starting
- Ensures proper fuel delivery at all speeds
- Designed for EFI fuel systems
A failing fuel pump can cause hard starting, hesitation, loss of power, or engine stalling.
System Function and Connections
- System Type: Electronic Fuel Injection (EFI)
- Pump Type: Electric fuel pump
- Location: Engine-mounted fuel system
FAQ
What engines does this fuel pump fit?
It fits Mercury 25HP to 60HP EFI outboards and Honda BF75 to BF130 engines using these OEM fuel pump numbers.
What is the difference between EMP and Pro Marine versions?
Both are high-quality aftermarket replacements. EMP and Pro Marine offer similar fitment with brand preference depending on customer choice.
Should I replace seals and filters at the same time?
Yes, if your system requires it. Consider the complete kit version if you need seals and filters.
How do I confirm fitment?
Match your existing fuel pump number to one of the cross references listed above.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
892267E, 898101T67, 892267A51, 16735-ZW5-003, 16735-ZY3-004, Mercury EFI fuel pump, Honda fuel pump, Tohatsu fuel pump
HZY316735004
HZY316735004
16735-ZW5-003
16735-ZY3-004
3AC043020
3AC043020M
3AC043100
3AC043100M
3AC101500
3AC101500M
892267A51
898101T67