S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
MAR-FLTHD-10-BK
55481
89876
89876A3
9-37855
9-37862
8M0100493
823174
823174T
9-73404
42364A91
42364A92
Evinrude E-TEC G2 Thermostat Service Kit
Evinrude E-TEC G2 200-300HP Thermostat Kit - 13345
The 13345 Thermostat Kit is designed for select Evinrude E-TEC G2 200HP through 300HP outboards.
Verified engine families include AB250 / AB300, AF200-300, AG200-300 and AH200-300 E-TEC G2 models.
This kit brings together the thermostat service components commonly needed when servicing the thermostat assembly, with related thermostat cover and spring references listed below.
AB: 250HP / 300HP
AF: 200-300HP
AG: 200-300HP
AH: 200-300HP
Fitment
| Evinrude E-TEC G2 Model Family | Horsepower |
|---|---|
| AB | 250HP / 300HP |
| AF | 200HP through 300HP |
| AG | 200HP through 300HP |
| AH | 200HP through 300HP |
Verify your complete Evinrude model designation before ordering. E-TEC G2 engines were produced in multiple model families and horsepower configurations, and thermostat components should be confirmed against the exact engine application.
Thermostat Kit Components
The thermostat assembly uses the following components. Stocked items are linked below for quick replacement, while the thermostat cover and spring are noted as special-order components.
Thermostat cover used with the E-TEC G2 thermostat assembly.
Status: Special Order
Spring used in the thermostat assembly to maintain the proper thermostat position and operation.
Status: Special Order
Thermostat Gasket - 10-1155
Replacement gasket used to seal the thermostat assembly during installation.
What is Included
The 13345 Thermostat Kit is intended to simplify thermostat service on compatible Evinrude E-TEC G2 engines.
The thermostat system uses the components shown above, including the thermostat, thermostat gasket, thermostat cap O-ring, thermostat cover and spring. Verify the exact contents of the 13345 package shown on the product listing before ordering any individual components separately.
Why Replace the Thermostat?
The thermostat regulates coolant flow through the engine so the powerhead reaches and maintains the correct operating temperature.
A thermostat that sticks open can cause the engine to operate too cool, while a thermostat that sticks closed or does not open correctly can contribute to elevated engine temperature or overheating.
Common Reasons for Thermostat Service
- Routine cooling-system maintenance
- Engine running hotter than normal
- Engine running cooler than expected
- Thermostat sticking or corroded
- Salt or mineral buildup around the thermostat housing
- Cooling-system inspection during major engine service
- Damaged thermostat gasket or O-ring
- Thermostat housing opened for inspection or repair
Inspect the Complete Thermostat Assembly
When the thermostat housing is opened, inspect more than just the thermostat. The gasket, cap O-ring, spring and thermostat cover should also be checked for wear, corrosion, damage or deterioration.
Replacing damaged sealing components during thermostat service can help prevent coolant leaks and avoid reopening the housing for a minor seal failure later.
Thermostat Service Components
| Component | Part Number | Availability |
|---|---|---|
| Thermostat Cap O-Ring | 1188 | Linked Above |
| Thermostat Cover | 5008903 | Special Order |
| Thermostat Spring | 0351145 | Special Order |
| Thermostat Gasket | 10-1155 | Linked Above |
| 143°F Brass Thermostat | 403 | Linked Above |
Key Features and Benefits
- Thermostat service kit for Evinrude E-TEC G2 outboards
- Fits select G2 200HP through 300HP applications
- Fits AB250 and AB300 model families
- Fits AF200-300 model families
- Fits AG200-300 model families
- Fits AH200-300 model families
- 143°F replacement thermostat available separately
- Thermostat gasket available separately
- Thermostat cap O-ring available separately
- Thermostat cover 5008903 available by special order
- Thermostat spring 0351145 available by special order
- Convenient option when servicing the complete thermostat assembly
FAQ
What engines does thermostat kit 13345 fit?
It fits select Evinrude E-TEC G2 200-300HP engines,
including AB250 / AB300 and AF, AG and AH 200-300HP model families.
Does this fit Evinrude E-TEC G2 300HP?
Yes. The supplied fitment includes multiple 300HP G2 applications within
the AB, AF, AG and AH model families.
What thermostat is used with this kit?
The linked 403 brass thermostat is rated at
143°F.
Can I buy the thermostat separately?
Yes. The 403 thermostat is linked above.
Can I buy the thermostat gasket separately?
Yes. The 10-1155 thermostat gasket is linked above.
Can I buy the thermostat O-ring separately?
Yes. The 1188 thermostat cap O-ring is linked above.
Is the thermostat cover available?
Yes. Thermostat cover 5008903 is listed as
special order.
Is the thermostat spring available?
Yes. Spring 0351145 is available by special order.
Should I replace the gasket and O-ring when servicing the thermostat?
Inspect both sealing components whenever the housing is opened and replace
them if they are damaged, hardened, flattened or otherwise unsuitable for
reuse.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help verifying your E-TEC G2 model?
Contact Pro Marine
Phone: 941-721-3000
Searchable Terms
13345, Evinrude 13345, Evinrude thermostat kit, Evinrude ETEC G2 thermostat, Evinrude E-TEC G2 thermostat kit, G2 200 thermostat, G2 225 thermostat, G2 250 thermostat, G2 300 thermostat, AB250 thermostat, AB300 thermostat, AF200 thermostat, AF225 thermostat, AF250 thermostat, AF300 thermostat, AG200 thermostat, AG225 thermostat, AG250 thermostat, AG300 thermostat, AH200 thermostat, AH225 thermostat, AH250 thermostat, AH300 thermostat, 1188, thermostat cap o-ring, 5008903, Evinrude thermostat cover, 0351145, Evinrude thermostat spring, 10-1155, Evinrude thermostat gasket, 403, Evinrude 143 thermostat, 143 degree thermostat, ETEC G2 cooling system, Evinrude G2 cooling parts
689-W0001-C2-00
689-W0001-22-00
GLM Marine Replacement Component
Yamaha V4 V6 115-300HP & Mercury 225/250 Driveshaft Collar
The GLM 9076GM Driveshaft Collar is an aftermarket replacement designed for Yamaha and Mercury outboards utilizing Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901. Installed within the water pump assembly, this collar helps maintain proper alignment of critical cooling system components.
Whether you're rebuilding a complete water pump, servicing a lower unit, or performing preventative maintenance, the GLM 9076GM offers a dependable replacement option for a wide range of Yamaha V4 and V6 outboards as well as Mercury EFI FourStroke models.
OEM Numbers & Cross References
The GLM 9076GM cross references directly to Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
| Manufacturer | Part Number |
|---|---|
| GLM Marine | 9076GM |
| Yamaha OEM | 61A-45527-00-00 |
| Mercury OEM | 8886901 |
| Pro Marine | 45527P |
| Sierra | 18-9076 |
| Mercury OEM Part | 45527 |
Compatible Applications
Yamaha OEM 61A-45527-00-00 is used across a broad range of Yamaha V4 and V6 engines, including many Saltwater Series, EFI, OX66, VMAX, and four-stroke models. Mercury OEM 8886901 is commonly found on Mercury 225 and 250 EFI FourStroke outboards.
| Manufacturer | Common Applications |
|---|---|
| Yamaha | 115HP, C115, S115 |
| Yamaha | 130HP, L130 |
| Yamaha | 150HP, C150, D150, DX150, FL150, LF150, LX150, SX150, VX150, VZ150, Z150 |
| Yamaha | 175HP Models |
| Yamaha | 200HP, F200, LF200, LX200, SX200, VX200, VZ200, Z200 |
| Yamaha | 225HP, F225, LF225, LX225, VX225, V225, OX66 225, VMAX 225 |
| Yamaha | 250HP, L250, LX250, SX250, VX250, VZ250, Z250, OX66 250 |
| Yamaha | 300HP, LZ300, VZ300, Z300 |
| Mercury | 225 EFI FourStroke |
| Mercury | 250 EFI FourStroke |
Yamaha used several lower unit and water pump designs across various engine families. Always confirm your OEM part number before ordering.
This GLM collar replaces Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
Alternative Brands Available
Mercury OEM 45527
Genuine Mercury factory replacement for customers seeking original equipment parts.
View OEM Version
Pro Marine 45527P
Popular aftermarket replacement used by marine repair shops and technicians.
View Pro Marine VersionDesigned for Water Pump Service & Rebuilds
The driveshaft collar works as part of the lower unit cooling system assembly. During water pump service, technicians frequently inspect and replace collars, spacers, wear plates, seals, and impellers together to help restore proper cooling system performance.
Because these components operate in a harsh marine environment, replacing worn parts during maintenance can help reduce the likelihood of future cooling system issues.
GLM 9076GM Features
- Replaces Yamaha OEM 61A-45527-00-00
- Replaces Mercury OEM 8886901
- Fits Yamaha V4 and V6 applications from 115HP through 300HP
- Fits Mercury 225 and 250 EFI FourStroke models
- Designed for lower unit cooling system repairs
- Ideal for water pump rebuilds and preventative maintenance
- Cost-effective aftermarket replacement
Why Choose GLM Marine Parts?
GLM Marine has supplied aftermarket marine engine components for decades and is well known throughout the boating industry for offering dependable replacement parts for outboard, sterndrive, and inboard applications.
The GLM 9076GM provides boat owners and marine technicians with a practical alternative to OEM components while maintaining compatibility with the original application.
FAQ
What OEM numbers does GLM 9076GM replace?
Yamaha 61A-45527-00-00 and Mercury 8886901.
What engines commonly use this driveshaft collar?
Many Yamaha V4 and V6 engines from 115HP through 300HP as well as Mercury 225 and 250 EFI FourStroke models.
Is this a genuine Mercury part?
No. This is a GLM Marine aftermarket replacement. The Mercury OEM version is linked above.
Do you stock other brands?
Yes. We also carry Mercury OEM, Pro Marine, and Sierra versions of this driveshaft collar.
When should this part be replaced?
The collar should be inspected during water pump service and replaced if wear, corrosion, or damage is present.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new and unused.
- Installed parts are not returnable.
- Return authorization required before returning merchandise.
Need assistance?
Contact Us
Phone: 941-721-3000
Searchable Terms
GLM 9076GM, 9076GM, Yamaha 61A-45527-00-00, Mercury 8886901, Yamaha V4 driveshaft collar, Yamaha V6 driveshaft collar, Yamaha OX66 water pump parts, Yamaha VMAX cooling system parts, Yamaha 225 driveshaft collar, Yamaha 250 driveshaft collar, Mercury 225 EFI FourStroke driveshaft collar, Mercury 250 EFI FourStroke driveshaft collar, Pro Marine 45527P, Sierra 18-9076, Mercury OEM 45527, GLM Marine replacement parts
61A-45527-00-00
8886901
0769163
18-8300
18-8300
86011
878966
9-76221
0778163
0914063
160084
160084
18-1501
22491
22491
3852023
778163
914063
0778494
21137
21137
328825
778494