S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
GLM 8386E Lower Unit Seal Kit
The GLM 8386E Lower Unit Seal Kit is a complete gearcase seal kit designed for Suzuki V6 outboard lower units. This kit includes the seals needed to properly service the gearcase and maintain sealing to protect internal components.
Fitment Overview
This seal kit replaces Suzuki OEM part numbers 25700-98J00 and 25700-98J01. These OEM numbers are used across Suzuki V6 gearcase assemblies found on DF200 through DF300 outboards.
OEM diagram lookup confirms this kit is used across multiple horsepower ranges and model variants that share the same gearcase design.
Compatibility
| Brand | Model | Notes |
|---|---|---|
| Suzuki | DF200 | Standard & Select Variants |
| Suzuki | DF225 | Standard & Select Variants |
| Suzuki | DF250 / DF250S / DF250SS | Multiple Gearcase Variants |
| Suzuki | DF300 | Standard & Select Variants |
These engines share a common V6 gearcase platform where this seal kit is used.
Example Model Applications
- Suzuki DF200 V6 outboards
- Suzuki DF225 V6 outboards
- Suzuki DF250, DF250S, and DF250SS models
- Suzuki DF300 V6 outboards
These are common applications. Always verify using your OEM part number or gearcase diagram.
Fits These Serial Ranges
This seal kit is used across multiple Suzuki V6 engine generations and does not follow a single serial-number break.
Important: Confirm compatibility by matching your existing seal kit to 25700-98J01 or 25700-98J00.
Looking for this same seal kit in another brand?
View Sierra 18-8386 Gearcase Seal Kit
Part Numbers and Cross References
| Type | Part Number |
|---|---|
| GLM | 8386E |
| Suzuki OEM | 25700-98J01 |
| Suzuki OEM | 25700-98J00 |
| Aftermarket | 18-8386 (Sierra) |
What This Part Is Used For
This kit is used to service the lower unit (gearcase), replacing critical seals that prevent water intrusion and maintain proper lubrication of internal gears.
- Seals prop shaft, drive shaft, and shift shaft areas
- Prevents water contamination in gear oil
- Maintains proper lubrication inside the gearcase
- Helps extend gearcase life
Worn seals can allow water into the gearcase, leading to premature wear or internal damage.
System Function and Connections
- System Type: Lower unit / gearcase
- Component Type: Seal kit
- Location: Gearcase (lower unit)
FAQ
What engines does this seal kit fit?
It fits Suzuki DF200, DF225, DF250, and DF300 V6 outboards using this gearcase design.
What does this kit replace?
It replaces Suzuki part numbers 25700-98J00 and 25700-98J01.
Is this the same as the Sierra version?
Yes, it fits the same applications as Sierra 18-8386 but is offered under the GLM brand.
When should I replace lower unit seals?
During gearcase service or if water contamination is found in the gear oil.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
8386E, 25700-98J01, 25700-98J00, Suzuki DF200 seal kit, DF250 lower unit seals, DF300 gearcase seal kit
25700-98J00
25700-98J01
87869
Fits Mercury Verado 200-400HP L4 & L6 Outboards
Designed for Mercury Verado 200-400HP L4 and L6 outboard engines. The Pro Marine 8M0024870 Air Dam Decal is an OEM-style replacement decal used on the air dam / intake area of Mercury Verado engine cowlings. It is used to restore the original factory appearance of the engine.
Compatibility
This air dam decal fits select Mercury Verado L4 and L6 outboards ranging from 200HP to 400HP. It is applied to the air dam / intake area of the engine cowling.
Application Chart
| Brand | Engine Family | Horsepower | Engine Type | Component |
|---|---|---|---|---|
| Mercury | Verado L4 | 200-300 HP | 4-Stroke | Air Dam / Intake Decal |
| Mercury | Verado L6 | 200-400 HP | 4-Stroke | Air Dam / Intake Decal |
Always confirm compatibility using your engine serial number and existing decal part number before ordering.
Part Numbers & Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 8M0024870 |
| Cross Reference # | 8M0024870 |
What This Part Is Used For
This air dam decal is used to replace worn, faded, or damaged decals on Mercury Verado outboards. Exposure to sunlight, saltwater, and regular use can cause decals to fade or peel over time.
Installing a new decal helps restore the original factory appearance of the engine cowling and is commonly done during cosmetic restoration or when refurbishing the air intake / air dam area.
Frequently Asked Questions
What engines does this decal fit?
This decal fits Mercury Verado L4 and L6 outboards ranging from 200HP to 400HP.
Where is this decal installed?
It is installed on the air dam or intake area of the engine cowling.
Is this an OEM decal?
This is an OEM-style replacement decal supplied by Pro Marine.
Does this affect engine performance?
No. This is a cosmetic component used for appearance only.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, or FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical ground delivery time is 15 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
Pro Marine Part: 8M0024870
Cross Reference #: 8M0024870
Common Search Terms: Mercury Verado air dam decal, Mercury 200-400hp decal, Verado intake decal replacement
OEM Mercury Power Trim Seal Kit
Mercury EFI Power Trim Hydraulic O-Ring & Seal Kit
This genuine OEM Mercury power trim seal kit is used on select Mercury 105HP EFI Jet, 135HP EFI, and 150HP EFI FourStroke outboards.
The kit contains hydraulic O-rings and sealing components used during trim cylinder reseal service, hydraulic trim repair, and power trim maintenance.
Compatible Applications
| Horsepower | Engine Model | Serial Range | Application Notes |
|---|---|---|---|
| 105HP | Mercury EFI Jet | 3B672358 & Up | Power trim assembly components |
| 135HP | Mercury EFI FourStroke | 2B131942 & Up | Hydraulic trim and tilt systems |
| 150HP | Mercury EFI FourStroke | 1B905505 & Up | Power trim assembly components |
| 150HP | Mercury EFI Sea Pro | 2B139139 & Up | Commercial Sea Pro applications |
| 150HP | Mercury EFI Pro XS | 2B550139 & Up | Performance Pro XS models |
Always verify your engine horsepower, model type, and serial number before ordering hydraulic trim components and seal kits.
OEM Part Numbers & Cross References
| Type | Part Number |
|---|---|
| Mercury OEM Number | 8M0057770 |
What This Power Trim Seal Kit is Used For
This Mercury hydraulic trim seal kit is used during repair and reseal service of compatible Mercury power trim and tilt systems.
The included hydraulic O-rings and sealing components help seal trim cylinders, hydraulic passages, pistons, caps, and trim assembly components depending on trim system configuration.
Hydraulic seals commonly wear over time due to heat, hydraulic pressure, contamination, and marine operating conditions.
Replacing worn trim seals during hydraulic service can help reduce hydraulic fluid leaks and restore proper trim and tilt operation.
Key Features and Benefits
- Genuine OEM Mercury hydraulic trim seal kit
- Fits select Mercury EFI FourStroke trim systems
- Fits 105HP EFI Jet, 135HP EFI, and 150HP EFI models
- Includes hydraulic O-rings and sealing components
- Designed for trim cylinder reseal and repair service
- Helps reduce hydraulic fluid leaks
- Supports proper trim and tilt operation
- OEM Mercury hydraulic fit and compatibility
Power Trim Seal Kit Details
- Brand: Mercury Marine
- Part Type: Hydraulic O-Ring & Seal Kit
- OEM Part Number: 8M0057770
- Application: Mercury EFI FourStroke Power Trim Systems
- Horsepower Range: 105HP-150HP
- System: Power Trim & Tilt Hydraulic System
- Use: Hydraulic trim reseal and repair service
FAQ
What engines does this trim seal kit fit?
This kit fits select Mercury 105HP EFI Jet, 135HP EFI, and 150HP EFI FourStroke outboards depending on serial number range.
What is this seal kit used for?
This kit is used to reseal and service compatible Mercury hydraulic trim and tilt systems.
Is this a genuine Mercury part?
Yes. This is a genuine OEM Mercury hydraulic trim seal kit.
Should I verify my serial number before ordering?
Yes. Mercury used multiple trim system designs and hydraulic assemblies, so serial number verification is strongly recommended.
What are common signs of leaking trim seals?
Common symptoms may include hydraulic fluid leakage, trim drifting, weak trim operation, or inability to hold trim position.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic and trim components should be installed only after proper diagnosis and inspection.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0057770, Mercury trim seal kit, Mercury power trim O-ring kit, Mercury hydraulic trim kit, Mercury 105 EFI Jet trim seals, Mercury 135 EFI trim seals, Mercury 150 EFI trim seals, Mercury Sea Pro trim kit, Mercury Pro XS trim seal kit, Mercury trim cylinder seal kit, Mercury power trim repair kit, Mercury hydraulic O-rings
8M0149746
8M0051369
8M0061369
8M0061424
8M0078623
8M0078630
8M0078636
8M0078642
8401661
845282
8452821
857493A01
857493A1
857495A01
857495A1
858053KC1
858053K01
858053QC1
858053Q01
858056KC1
858056K01
858056QC1
858056Q01
858088KC1
858088K01
858088Q01
883723K01
883723Q01
883725K01
883725Q01
0504080
0504081
0764364
0764365
0765720
0772733
0775594
0775597
0779434
18-9420-3
18-94203
764365
765720
779434
8M0078616
8M0078617
8M0078618
8M0078625
8M0078626
8M0078632
8M0078638
802833A1
802833A40
802833Q1
802833Q40
802835A1
802835A30
802835Q1
802835Q30
802836A1
802836A4
802836Q1
802836Q4
828000A40
828002A40
857391A01
857391A1
857471A1
858045K01
858045Q01
858046KC1
858046K01
858046QB1
858046QC1
858046Q01
858047KC1
858047K01
858047QC1
858047Q01
883696A01
883696A1
883697A1
9-82351
3859020
8M0087834
885165
OEM Mercury 75-115HP 2.1L 300 Hour Service Kit With Oil & Gear Lube
Mercury 75-115HP 2.1L EFI 300 Hour Kit - Serial 2B094996-Present
The Mercury 8M0097857-L 300 hour service kit is designed for Mercury 75HP, 90HP, and 115HP 2.1L FourStroke EFI outboards with serial numbers 2B094996 and higher.
This OEM Mercury maintenance kit includes the major components commonly replaced during scheduled 300 hour maintenance intervals along with Mercury 10W30 engine oil and Mercury gear lube.
Compatible Applications
| Brand | Horsepower | Engine Type | Serial Range |
|---|---|---|---|
| Mercury | 75HP, 90HP, 115HP | 2.1L FourStroke EFI Outboard | 2B094996 & Higher |
This 300 hour service kit is for Mercury 75HP, 90HP, and 115HP 2.1L FourStroke EFI outboards with serial numbers 2B094996 and higher.
Always verify your engine serial number before ordering maintenance parts.
What is Included
| Included Component | Application |
|---|---|
| Oil Filter | Engine oil filtration service |
| Fuel Filter | Fuel system maintenance |
| Gearcase Drain Seals | Gearcase lubricant service |
| Spark Plugs (4) | Ignition system maintenance |
| Thermostat Kit | Cooling system maintenance |
| Water Pump Impeller Kit | Water pump service |
| Alternator Belt | Charging system maintenance |
| Anodes | Corrosion protection |
| Mercury 10W30 Engine Oil | 1 gallon plus 2 quarts included |
| Mercury Gear Lube | Gearcase lubricant included |
Oil & Gear Lube Included
Engine oil included: Mercury 10W30 engine oil - 1 gallon plus 2 quarts.
Gear lube included: Mercury gear lube for gearcase service.
Want to Use a Different Oil?
300 Hour Kit Without Oil & Gear Lube
Some customers prefer using a different oil viscosity, synthetic blend, full synthetic oil, or already have oil and gear lube available. The standard Mercury 8M0097857 300 hour service kit without oil or gear lube is available separately.
View Kit Without OilWhat This Service Kit is Used For
The Mercury 8M0097857-L service kit is used for major 300 hour maintenance on compatible Mercury 75-115HP 2.1L FourStroke EFI outboards with serial numbers 2B094996 and higher.
This maintenance interval commonly includes ignition system maintenance, cooling system service, water pump service, fuel filtration, corrosion protection, engine oil service, and gearcase lubricant replacement.
Key Features and Benefits
- OEM Mercury 300 hour service kit
- Fits Mercury 75HP, 90HP, and 115HP 2.1L FourStroke EFI outboards
- For serial numbers 2B094996 and higher
- Includes spark plugs, thermostat kit, impeller kit, alternator belt, and anodes
- Includes Mercury 10W30 engine oil
- Includes Mercury gear lube
- Convenient all-in-one maintenance package
- Allows complete scheduled maintenance in one kit
Service Kit Details
- Part Number: 8M0097857-L
- Base Mercury Kit Number: 8M0097857
- Application: Mercury 75-115HP 2.1L FourStroke EFI Outboards
- Serial Range: 2B094996 & Higher
- Service Interval: 300 Hour Maintenance
- Oil Included: Yes - Mercury 10W30
- Oil Quantity Included: 1 gallon plus 2 quarts
- Gear Lube Included: Yes
FAQ
What engines does this service kit fit?
This kit fits Mercury 75HP, 90HP, and 115HP 2.1L FourStroke EFI outboards with serial numbers 2B094996 and higher.
Does this kit include engine oil?
Yes. This version includes Mercury 10W30 engine oil.
How much oil is included?
This kit includes 1 gallon plus 2 quarts of Mercury 10W30 engine oil.
Does this kit include gear lube?
Yes. Mercury gear lube is included for the gearcase service.
Is there a version without oil and gear lube?
Yes. The Mercury 8M0097857 service kit without oil and gear lube is linked above.
Why would someone choose the kit without oil?
Some customers prefer using a different oil viscosity, synthetic blend,
full synthetic oil, or already have oil and gear lube available.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Maintenance kits must be new, unused, and in original packaging.
- Opened oil and lubricants may not be returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0097857-L, 8M0097857, Mercury 75HP 2.1L 300 hour service kit, Mercury 90HP 2.1L 300 hour service kit, Mercury 115HP 2.1L 300 hour service kit, Mercury 2.1L FourStroke maintenance kit, Mercury serial 2B094996, Mercury EFI maintenance, Mercury spark plug kit, Mercury thermostat kit, Mercury impeller kit, Mercury alternator belt, Mercury anodes, Mercury 10W30 oil, Mercury gear lube, Mercury Premium Gear Lube, Mercury High Performance Gear Lube