S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Yamaha F150 A/B 2006Present 10W-30 Service Kit (With Impeller)
This complete service kit is designed for Yamaha F150 A and B series four-stroke outboard engines (2006Present) and includes the most commonly replaced maintenance components required for routine service intervals. Bundling these items together helps ensure proper fitment, simplifies ordering, and saves time during scheduled maintenance.
This is the service kit with an impeller repair kit, making it ideal for maintenance intervals that include water pump service.
Compatibility
| Engine Model | Horsepower | Year Range | Notes |
|---|---|---|---|
| Yamaha F150A | 150 HP | 2006Present | Standard rotation models |
| Yamaha F150B | 150 HP | 2006Present | Updated mid-section & cowling design |
| Yamaha LF150A | 150 HP | 2006Present | Counter-rotation models |
| Yamaha LF150B | 150 HP | 2006Present | Counter-rotation models |
Important: Always verify your engine model designation and serial number before ordering to ensure proper fitment.
What is Included
This service kit includes a combination of OEM-equivalent and aftermarket components. Fuel Filter, Oil Filter, Gaskets, Seals, and the Impeller Repair Kit included in this kit are Pro Marine brand products.
- Oil Filter (Pro Marine Brand)
- Fuel Filter (Pro Marine Brand)
- Gaskets & Seals (Pro Marine Brand)
- Impeller Repair Kit / Water Pump Service Components (Pro Marine Brand)
- Required O-rings and sealing components
- Yamaha 10W-30 Marine Engine Oil (Yamaha Brand)
- Yamaha Marine Gear Lube (Yamaha Brand)
Exact contents may vary slightly depending on engine configuration.
Brand Transparency & Compatibility
- Fuel Filter, Oil Filter, Gaskets, Seals, and Impeller Repair Kit are Pro Marine Brand Products
- Engine oil included is Yamaha 10W-30 Marine Engine Oil
- Gear lube included is Yamaha Marine Gear Lube
- All components meet or exceed OEM specifications
- Fully compatible with Yamaha factory service requirements
Why Use a Complete Service Kit?
- Replaces critical maintenance items at once
- Reduces ordering mistakes and downtime
- Ensures proper sealing, filtration, and lubrication
- Includes water pump service components
- Ideal for annual and 100-hour service intervals
Customize Your Own Kit
Some customers prefer to customize their maintenance setup. If you would rather build your own service kit, you can use the parts list below to select individual components.
Frequently Asked Questions (FAQ)
Is this kit compatible with all Yamaha F150 engines?
This kit is designed for Yamaha F150A, F150B, LF150A, and LF150B outboards from 2006Present. Always verify engine model designation and serial number before ordering.
Does this kit include an impeller repair kit?
Yes. This kit includes an impeller repair kit for servicing the water pump.
Are these OEM Yamaha parts?
This kit includes a combination of OEM-equivalent and aftermarket components. Fuel Filter, Oil Filter, Gaskets, Seals, and Impeller Repair Kit are Pro Marine brand products. Engine oil and gear lube are genuine Yamaha brand fluids.
Does this kit include engine oil and gear lube?
Yes. This kit includes Yamaha 10W-30 marine engine oil and Yamaha marine gear lube.
How often should this service kit be used?
Yamaha recommends servicing every 100 hours or annually, whichever comes first.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Installed items and OEM electrical parts are not eligible for return.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Oil, lubricants, and fluids carry a $10 shipping charge.
63V-85580-00-00
63V-85580-01-00
63V-85580-02-00
FO31554
F031554
F10346
18-7392
676-14985-01-00
83363M
891730A01
63V-85520-00-00
63V-85520-01-00
63V-85520-02-00
63V-14985-00-00
57001-1426
Pro Marine Mercury Remote Control Power Trim Switch
Mercury 4000 Side Mount Trim Switch and Harness - 18286P
Pro Marine 18286P is an aftermarket replacement power trim and tilt switch with harness for compatible Mercury remote controls, including the 4000 Side Mount Power Trim control.
This switch replaces Mercury OEM part number 18286A43 and previous Mercury numbers 18286A26, 18286A2 and 16991A1.
Pro Marine also stocks the genuine Mercury OEM 18286A43 Switch/Harness Assembly for customers who prefer the factory Mercury version.
Part Type: Power Trim and Tilt Switch / Harness
Manufacturer: Pro Marine
OEM or Aftermarket: Aftermarket
Primary Application: Mercury 4000 Side Mount Power Trim Control
Control Application: 1994-Present
Replaces OEM #: 18286A43
Pro Marine Item #: 18286P
Compatible Applications
Pro Marine 18286P replaces the trim switch and harness used in the following applications identified in the supplied Mercury catalog fitment.
| Application | Years | Fitment Details |
|---|---|---|
| Mercury 4000 Side Mount Control | 1994-Present | Side Mount Remote Control with Power Trim |
| Mercury Amanzi 320 Hypalon RIB | 2004-2006 | Remote Control Components |
| Mercury Amanzi 380 Hypalon RIB | 2004-2006 | Remote Control Components |
This switch is selected by the Mercury remote-control configuration, not simply by engine horsepower or model.
The supplied Mercury application information identifies this switch with the 4000 Side Mount Power Trim control from 1994-Present.
Before ordering, inspect your remote control and confirm that the original switch crosses to 18286A43, 18286A26, 18286A2 or 16991A1.
OEM and Cross Reference Numbers
Mercury has used several part numbers for this switch and harness assembly. Current OEM number 18286A43 supersedes the earlier numbers listed below.
| Brand / Type | Part Number | Status |
|---|---|---|
| Pro Marine | 18286P | Aftermarket Replacement |
| Mercury OEM | 18286A43 | Current OEM Number |
| Mercury OEM | 18286A26 | Superseded |
| Mercury OEM | 18286A2 | Superseded |
| Mercury OEM | 16991A1 | Superseded |
Mercury OEM Version Available
Prefer the genuine factory component? Pro Marine also stocks Mercury Marine OEM 18286A43 for the same switch application.
Choose between the Pro Marine 18286P aftermarket replacement and the genuine Mercury OEM 18286A43.
View Mercury OEM Switch/HarnessWhat This Part is Used For
This switch is installed in a compatible Mercury remote-control handle and allows the operator to control the engine's power trim and tilt system directly from the throttle/control handle.
Pressing the switch in one direction commands the trim/tilt system upward, while pressing it in the opposite direction commands the system downward. The attached harness connects the switch to the remote-control wiring.
This lets the operator adjust engine trim while underway or raise and lower the engine as required without moving away from the control handle.
Common Signs of a Worn Trim Switch
A remote-control trim switch is exposed to repeated use and the marine environment. Over time, the switch or attached wiring can become worn or damaged.
Symptoms that may indicate the switch or harness needs inspection include:
- Trim operates from the engine-mounted switch but not from the control handle
- Intermittent trim-up or trim-down operation
- Switch must be pressed repeatedly before the trim responds
- One direction works while the other does not
- Visible damage to the switch button
- Damaged, pinched or deteriorated switch wiring
A trim system that does not operate from the remote-control handle does not automatically mean the trim pump or motor has failed.
If the engine trims correctly from another trim switch but not from the control handle, inspect the remote trim switch, harness, connectors and related wiring as part of the diagnosis.
Replacement Tips
- Disconnect battery power before servicing the remote control.
- Confirm the original switch part number whenever possible.
- Note the routing of the existing switch harness before removal.
- Inspect the remote-control wiring and connectors for corrosion or damage.
- Avoid pinching the replacement harness when reassembling the control.
- Verify both trim-up and trim-down operation after installation.
- Follow Mercury service procedures for the specific remote control.
Key Features and Benefits
- Pro Marine aftermarket power trim and tilt switch
- Switch and attached harness assembly
- Pro Marine item number 18286P
- Replacement for Mercury OEM 18286A43
- Replaces Mercury 18286A26
- Replaces Mercury 18286A2
- Replaces Mercury 16991A1
- Fits the applicable Mercury 4000 Side Mount Power Trim control
- Supplied fitment lists the 4000 Side Mount control from 1994-Present
- Mercury OEM version also available from Pro Marine
FAQ
What does Pro Marine 18286P replace?
18286P replaces Mercury switch/harness assembly
18286A43 and previous Mercury numbers
18286A26, 18286A2 and 16991A1.
Is this a power trim and tilt switch?
Yes. This is the remote-control switch used to operate the engine's
power trim and tilt system from the compatible Mercury control handle.
Does 18286A43 replace 18286A26?
Yes. Mercury 18286A43 is the current OEM replacement
for superseded 18286A26.
Does 18286A43 replace 18286A2 and 16991A1?
Yes. Both 18286A2 and 16991A1 are earlier Mercury
switch/harness numbers superseded by 18286A43.
Does this fit the Mercury 4000 Side Mount control?
Yes. The supplied Mercury fitment identifies this switch with the
4000 Side Mount Power Trim control from 1994-Present.
Does this fit by engine horsepower?
This part is primarily identified by the remote-control
assembly, rather than engine horsepower alone. Verify the
control style and original switch number before ordering.
Does the switch include the harness?
Yes. 18286P is a switch and harness assembly.
Do you carry the genuine Mercury version?
Yes. Pro Marine also stocks the
Mercury OEM 18286A43 Switch/Harness Assembly
.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
18286P, 18286A43, 87-18286A43, 18286A26, 87-18286A26, 18286A2, 87-18286A2, 16991A1, 87-16991A1
Searchable Terms
Mercury trim switch, Mercury tilt switch, Mercury power trim switch, Mercury remote control trim switch, Mercury switch harness, Mercury 4000 trim switch, Mercury 4000 side mount trim switch, Mercury throttle handle trim switch, Mercury control box trim switch, Mercury remote trim switch, Mercury 18286A43 replacement, Pro Marine Mercury trim switch
18286A2
18286A26
18286A43
Yamaha F115 2006?2014 10W-30 Service Kit (Without Impeller)
This service kit is designed for Yamaha F115 outboard engines (2006?2014) and includes the most commonly replaced maintenance components needed for routine service intervals. Bundling these items together helps ensure proper fitment, simplifies ordering, and saves time during maintenance.
This is the service kit without an impeller repair kit. It is ideal for routine maintenance when the water pump does not require service.
Compatibility
| Engine Model | Horsepower | Year Range | Notes |
|---|---|---|---|
| Yamaha F115 | 115 HP | 2006?2014 | Excludes 2014 XB, LB, and JB models |
| Yamaha LF115 | 115 HP | 2006?2014 | Excludes 2014 XB, LB, and JB models |
Important: Always verify your engine model designation and serial number before ordering to ensure proper fitment.
What is Included
This service kit includes a combination of OEM-equivalent and aftermarket components. Fuel Filter, Oil Filter, Gaskets, and Seals included in this kit are Pro Marine brand products.
- Oil Filter (Pro Marine Brand)
- Fuel Filter (Pro Marine Brand)
- Gaskets & Seals (Pro Marine Brand)
- Required O-rings and sealing components
- Yamaha 10W-30 Marine Engine Oil (Yamaha Brand)
- Yamaha Marine Gear Lube (Yamaha Brand)
Exact contents may vary slightly depending on engine configuration.
Brand Transparency & Compatibility
- Fuel Filter, Oil Filter, Gaskets, and Seals are Pro Marine Brand Products
- Engine oil included is Yamaha 10W-30 Marine Engine Oil
- Gear lube included is Yamaha Marine Gear Lube
- All components meet or exceed OEM specifications
- Fully compatible with Yamaha factory service requirements
Why Use a Complete Service Kit?
- Replaces critical maintenance items at once
- Reduces ordering mistakes and downtime
- Ensures proper sealing, filtration, and lubrication
- Ideal for annual and 100-hour service intervals
Customize Your Own Kit
Some customers prefer to customize their maintenance setup. If you would rather build your own service kit, you can use the parts list below to select individual components.
Frequently Asked Questions (FAQ)
Is this kit compatible with all Yamaha F115 engines?
This kit is designed for Yamaha F115 and LF115 outboards from 2006?2014. Excludes 2014 XB, LB, and JB models. Always verify engine model and serial number before ordering.
Does this kit include an impeller repair kit?
No. This kit does not include an impeller repair kit. If you need a kit with an impeller, select the appropriate ?with impeller? version.
Are these OEM Yamaha parts?
This kit includes a combination of OEM-equivalent and aftermarket components. Fuel Filter, Oil Filter, Gaskets, and Seals are Pro Marine brand products. Engine oil and gear lube are genuine Yamaha brand fluids.
Does this kit include engine oil and gear lube?
Yes. This kit includes Yamaha 10W-30 marine engine oil and Yamaha marine gear lube.
How often should this service kit be used?
Yamaha recommends servicing every 100 hours or annually, whichever comes first.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Installed items and OEM electrical parts are not eligible for return.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Oil, lubricants, and fluids carry a $10 shipping charge.