Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Yamaha Outboard Parts

Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.

Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.

Shop Yamaha Outboard Parts by System

Rebuilding a Yamaha Outboard?

Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.

Shop Engine Rebuild Parts by Model »

Find the Correct Yamaha Outboard Part

Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.

Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.

Use Our OEM Parts Lookup »
Common Yamaha Outboard Engine Families

Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.

  • Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
  • Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
  • V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
  • VMAX SHO: performance-oriented Yamaha SHO applications
  • HPDI: high-pressure direct-injection Yamaha 2-stroke applications
  • High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
  • Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
  • Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
  • Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
  • Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
  • Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
  • Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
  • Genuine Yamaha OEM and aftermarket replacement options for many applications.
  • Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component.
  • Dealer pricing available for qualified marine businesses.
  • Large selection of Yamaha service kits and repair components.
  • Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions

How do I find the correct Yamaha outboard part?

Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.

Can I search Yamaha parts by OEM part number?

Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.

Do Yamaha outboard parts vary by model and year?

Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.

Do you carry Yamaha engine rebuild parts?

Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.

Do you carry both OEM and aftermarket Yamaha parts?

Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.

What Yamaha parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2389 - 2400 of 2777 ▶ ▶|
View:
19.4-22.6mm / .764-.890" Band Dim 7x0.6mm 316 SS
Item#:
4-226
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
9.88
Pack
13.7-16.2mm / .539-.638" Band Dim 7x0.6mm 316 SS
Item#:
4-162
Cross Reference#:
13791
8M0214911
888988015
Manufacturer Item:
8M0214911
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.62
Pack
14.5-17mm / .571-.669" Band Dim 7x0.6mm Stainless
Item#:
4-170
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
12/01/2026
Your Price:
7.40
Pack
15.3-18.5mm /0.602-0.728" Band Dim 7x0.6mm Stainless
Item#:
4-185
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
11/24/2026
Your Price:
9.59
Pack
16.6-19.8mm / .654-.780" Band Dim 7x0.6mm 316 SS
Item#:
4-198
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
9.88
Pack
MPI Black Oetiker Clamp # 4-170
Item#:
315-038
Available:
Out of Stock
Your Price:
2.49
Foot
This item is discontinued
MPI 5/16" Fuel Line for Above-Deck Marine Applications

USCG Type B1/B2 Marine Fuel Hose

MPI 5/16" Marine Fuel Hose - Type B1/B2 - Sold by the Foot

Build or replace your outboard fuel line with 5/16" USCG Type B1/B2 marine fuel hose. This MPI bulk fuel hose is sold by the foot so you can order the length required for your installation without purchasing a preassembled fuel line.

Type B marine fuel hose is commonly used in exposed and above-deck outboard fuel-line applications where Type B hose is appropriate for the installation.

Need a complete setup? Pro Marine also stocks the correct Oetiker clamp, 5/16" primer bulb, Oetiker pincer tool and a complete clamp assortment with the installation tool included.

5/16" Bulk Marine Fuel Line

Inside Diameter: 5/16"
USCG Rating: Type B1/B2
Manufacturer: MPI Products
Color: Black
Sold: By the Foot
Recommended Clamp: Oetiker 4-153
Recommended Primer Bulb: Pro Marine 8004 - 5/16"

How to Order Bulk Fuel Hose

This hose is sold by the foot. Select the quantity based on the total continuous length of hose required for your installation.

For example, if you need approximately 8 feet of fuel hose, order a quantity of 8.

What Does USCG Type B1/B2 Fuel Hose Mean?

Marine fuel hose classifications help identify where and how a hose is designed to be used within a boat's fuel system.

The "B" designation identifies marine fuel hose that does not carry the same USCG fire-test requirement as Type A hose. For that reason, Type B hose is commonly associated with exposed or above-deck fuel-line installations, while Type A hose is the appropriate choice where the installation requires the additional fire-resistant Type A classification.

The numbers "1" and "2" refer to fuel permeation performance. Type 1 is the lower-permeation classification and is the classification normally associated with fuel-feed hose intended to contain fuel continuously. Type 2 permits greater permeation and is used for applications such as certain fill and vent arrangements.

Quick Guide: Type A vs. Type B Marine Fuel Hose
Fuel Hose Type General Use Fire-Test Requirement
Type A1 Fuel-feed applications including installations requiring Type A protection Yes
Type A2 Certain fill and vent applications requiring Type A protection Yes
Type B1 Fuel-feed applications where Type B hose is permitted No Type A fire-test rating
Type B2 Certain fill and vent applications where Type B hose is permitted No Type A fire-test rating
Need Fuel Hose for an Enclosed or Below-Deck Installation?

Do not choose fuel hose based on diameter alone. The required USCG hose classification depends on where and how the hose is installed.

For installations requiring Type A1/A2 marine fuel hose, use our 5/16" Type A fuel hose instead.

View 5/16" Type A Marine Fuel Hose

Complete Your 5/16" Fuel Line Setup

The correct hose is only one part of a reliable marine fuel-line installation. Pro Marine stocks the matching clamps, primer bulb and installation tools needed to build or service your fuel line.

Oetiker 4-153 Clamp Oetiker 4-153 Ear Clamp - 10 Pack

The matching Oetiker ear clamp for this MPI 5/16" Type B fuel hose. Provides a clean, secure connection at fuel fittings and components.

View Oetiker 4-153 Clamp
5/16 Primer Bulb Pro Marine 8004 - 5/16" Primer Bulb

5/16" primer bulb for building or servicing a marine outboard fuel-line assembly using 5/16" fuel hose.

View 5/16" Primer Bulb
Oetiker Pincer Oetiker Standard Jaw Pincer Tool

Installation tool for properly closing Oetiker ear clamps when assembling marine fuel lines.

View Oetiker Pincer Tool
Oetiker Clamp Pack Pro Marine Oetiker Clamp Pack with Tool

Complete assortment containing common Oetiker clamp sizes plus the installation tool. A convenient option for marine shops, technicians and customers servicing multiple hose sizes.

View Oetiker Clamp Pack

Mercury OEM 5/16" Fuel Hose Available

Mercury OEM 5/16" Silver Fuel Hose

Prefer the Mercury factory fuel hose? Pro Marine also stocks Mercury OEM 5/16" silver fuel hose sold by the foot.

The Mercury hose uses a different outside diameter than this MPI hose and therefore requires a different Oetiker clamp: 4-145.

View Mercury OEM 5/16" Fuel Hose

View Oetiker 4-145 Clamp for Mercury Fuel Hose

Why Doesn't Every 5/16" Fuel Hose Use the Same Clamp?

5/16" identifies the hose's inside diameter, not its outside diameter. Different hose constructions can have different wall thicknesses and therefore different outside diameters.

That is why this MPI 315-056 Type B hose uses Oetiker clamp 4-153, while the Mercury OEM 5/16" silver hose uses Oetiker clamp 4-145.

Always match the clamp to the specific hose being installed rather than selecting a clamp based only on the hose's inside diameter.

What This Fuel Hose is Used For

This 5/16" bulk marine fuel hose can be used when building, repairing or replacing fuel lines in compatible marine applications where USCG Type B hose is appropriate.

Selling the hose by the foot allows boat owners and marine technicians to build the required length and add the appropriate primer bulb, connectors, fittings and clamps for the specific installation.

Building a 5/16" Outboard Fuel Line

A typical 5/16" outboard fuel-line setup may require:

  • 5/16" marine fuel hose
  • 5/16" primer bulb
  • Correct engine-side fuel fitting or connector
  • Correct tank-side fitting or connection
  • Correctly sized Oetiker ear clamps
  • Oetiker pincer tool for clamp installation

The exact components depend on the engine, fuel tank and layout of the boat's fuel system.

Key Features & Benefits

  • 5/16" inside diameter marine fuel hose
  • USCG Type B1/B2 rated hose
  • MPI Products marine fuel line
  • Designed for exposed and above-deck applications where Type B hose is permitted
  • Sold by the foot for custom-length installations
  • Matching Oetiker 4-153 clamp available
  • Compatible 5/16" primer bulb available
  • Type A 5/16" alternative available for applications requiring Type A hose
  • Mercury OEM 5/16" silver fuel hose alternative available

Need Help Choosing the Right Marine Fuel Hose?

Hose diameter is only one part of choosing the correct marine fuel line. The hose classification, installation location, fuel-system design, fittings, primer bulb and clamp size should also be considered.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is this fuel hose?
This hose has a 5/16" inside diameter.

Is the hose sold by the foot?
Yes. Order the quantity corresponding to the number of feet needed for your installation.

What does USCG Type B mean?
Type B marine fuel hose meets the applicable SAE marine fuel-hose performance classification but does not carry the same USCG fire-test requirement as Type A hose. It is commonly used in exposed or above-deck applications where Type B hose is permitted.

What is the difference between B1 and B2?
The number identifies the hose's permeation classification. Type 1 has the lower permeation limit and is normally associated with fuel-feed applications intended to contain fuel continuously. Type 2 allows greater permeation and is used for certain other fuel-system applications.

Can I use this hose below deck?
Fuel-hose requirements depend on the installation. For enclosed or below-deck installations requiring the Type A fire-resistant classification, use the 5/16" Type A fuel hose .

Which Oetiker clamp fits this hose?
Use the Oetiker 4-153 ear clamp with this MPI 315-056 hose.

Which primer bulb fits this hose?
The Pro Marine 8004 5/16" Primer Bulb is the matching hose size.

Do you sell a Mercury OEM 5/16" fuel hose?
Yes. Pro Marine stocks Mercury OEM 5/16" silver fuel hose by the foot. The Mercury hose uses Oetiker clamp 4-145 rather than the 4-153 clamp used with this MPI hose.

Why are there different clamps for two 5/16" hoses?
The 5/16" measurement refers to inside diameter. Hose outside diameter can vary depending on wall thickness and construction, so the correct Oetiker clamp must be matched to the specific hose.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused, and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

315-056, MPI 315-056, 5/16 fuel hose, 5/16 marine fuel hose, 5/16 boat fuel line, 5/16 outboard fuel hose, USCG Type B fuel hose, Type B1 fuel hose, Type B2 fuel hose, marine fuel line by the foot, bulk marine fuel hose, above deck fuel hose, outboard fuel line, boat fuel hose, Oetiker 4-153, 4-153 fuel hose clamp, 5/16 primer bulb, marine primer bulb, Mercury 5/16 fuel hose, Type A marine fuel hose, Type B marine fuel hose

Item#:
315-056
Manufacturer:
MPI Products
Available:
In Stock
Your Price:
2.50
Foot
40.8-44mm / 1.59-1.72" Band Dim 7x0.6mm 316 SS
Item#:
4-440
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.52
Pack
10.3 - 12.8mm / .406-.504" Band Dim 7x0.6mm 316 SS
Item#:
4-128
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.62
Pack
9.8 - 12.3 mm / .386-.484" Band Dim 7x0.6mm 316 SS
Item#:
4-123
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.62
Pack
12-14.5mm / .472-.571" Band Dim 7x0.6mm 316 SS
Item#:
4-145
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.62
Pack
11.5-14mm / .453-.551" Band Dim 7x0.6mm Stainless
Item#:
4-140
Cross Reference#:
0346931
0769074
346931
769074
850241
Manufacturer Item:
769074
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.94
Pack
|◀ ◀ 2389 - 2400 of 2777 ▶ ▶|
View: