Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Yamaha Outboard Parts

Shop OEM and aftermarket Yamaha outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse Yamaha marine parts by system, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and routine service parts.

Pro Marine USA carries parts for Yamaha 2-stroke, Four Stroke, VMAX SHO, HPDI, and offshore outboards. Verify your engine model code, serial information, or OEM part number whenever possible before ordering.

Shop Yamaha Outboard Parts by System

Rebuilding a Yamaha Outboard?

Shop internal Yamaha engine rebuild parts by engine family to quickly find pistons, rings, cylinder sleeves, bearings, connecting rods, gaskets, valves, and other powerhead components for your application.

Shop Engine Rebuild Parts by Model »

Find the Correct Yamaha Outboard Part

Yamaha parts can vary by horsepower, model code, production year, and engine family. Use the OEM parts lookup to identify the original Yamaha part number from the factory diagram before ordering.

Once you have the OEM number, search Pro Marine USA for available genuine Yamaha and aftermarket replacement options.

Use Our OEM Parts Lookup »
Common Yamaha Outboard Engine Families

Pro Marine USA supports many popular Yamaha outboards across a wide horsepower range. Always confirm your exact model information before ordering parts.

  • Portable and Midrange: Yamaha 2HP through 60HP 2-stroke and Four Stroke applications
  • Inline Four-Cylinder: popular Yamaha F70 through F150 platforms
  • V6 Four Stroke: Yamaha V6 engine families across multiple horsepower ranges
  • VMAX SHO: performance-oriented Yamaha SHO applications
  • HPDI: high-pressure direct-injection Yamaha 2-stroke applications
  • High-Horsepower Offshore: large-displacement Yamaha offshore platforms
Common Yamaha Outboard Repair Areas
  • Engine overheating: water pumps, impellers, thermostats, cooling passages, and engine anodes.
  • Hard starting or rough running: fuel pumps, filters, injectors, carburetors, spark plugs, ignition components, and intake components.
  • Charging or ignition problems: ignition coils, stators, rectifier/regulators, sensors, wiring, and grounds.
  • Low compression or power loss: pistons, rings, cylinders, valves, bearings, gaskets, and other internal engine components.
  • Lower unit problems: seals, bearings, gears, shafts, and gear lube components.
  • Trim or steering problems: trim motors, hydraulic components, steering cylinders, hoses, and seals.
Why Buy Yamaha Outboard Parts from Pro Marine USA?
  • Genuine Yamaha OEM and aftermarket replacement options for many applications.
  • Parts for maintenance, professional repair, engine rebuilds, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component.
  • Dealer pricing available for qualified marine businesses.
  • Large selection of Yamaha service kits and repair components.
  • Fast weekday shipping on qualifying in-stock orders.
Frequently Asked Questions

How do I find the correct Yamaha outboard part?

Start with the engine horsepower, model code, production year, and available identification information. Use the OEM parts lookup to identify the original Yamaha part number whenever possible.

Can I search Yamaha parts by OEM part number?

Yes. Enter the Yamaha OEM part number into the Pro Marine USA site search to locate available OEM and aftermarket replacement options.

Do Yamaha outboard parts vary by model and year?

Yes. Yamaha may use different components on engines with the same horsepower depending on model code, engine family, and production range.

Do you carry Yamaha engine rebuild parts?

Yes. Pro Marine USA carries pistons, rings, bearings, connecting rods, cylinder sleeves, gaskets, valves, and other internal engine components for many Yamaha applications. You can also shop our Engine Rebuild Parts by Model section to narrow parts by engine family.

Do you carry both OEM and aftermarket Yamaha parts?

Yes. Pro Marine USA offers genuine Yamaha parts along with aftermarket replacement options for many Yamaha maintenance, repair, and rebuild applications.

What Yamaha parts are commonly replaced during routine maintenance?

Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, and model-specific service kit components.

Fitment Tip: Yamaha parts can vary by model code, engine family, production year, and horsepower. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 2437 - 2448 of 2777 ▶ ▶|
View:
17.8-21mm / .701-.827" Band Dim 7x0.6mm 316 SS
Item#:
4-210
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
9.88
Pack
MPI Low-Permeation Fuel Line for Enclosed and Below-Deck Applications

MPI Type A Low-Permeation Marine Fuel Hose

MPI 5/16" Type A Marine Fuel Hose - Sold by the Foot

The MPI 313-1 5/16" Type A Marine Fuel Hose is a low-permeation bulk fuel line for marine installations requiring the additional fire-resistant protection associated with USCG Type A fuel hose.

This hose is a strong choice for enclosed, below-deck and other installations where Type A hose is required. It is sold by the foot so you can purchase the exact length needed for the boat.

Pro Marine also stocks the correct Oetiker 4-170 ear clamp, a compatible 5/16" primer bulb, clamp installation tools and alternate 5/16" fuel-hose options.

5/16" Type A Low-Permeation Marine Fuel Hose

Inside Diameter: 5/16"
Manufacturer: MPI Products
Fuel Hose Type: Type A Marine Fuel Hose
Construction: Low Permeation
Sold: By the Foot
Recommended Clamp: Oetiker 4-170
Recommended Primer Bulb: Pro Marine 8004 - 5/16"

How to Order Bulk Fuel Hose

This hose is sold by the foot. Enter the quantity based on the total continuous length needed for your installation.

For example, if you need 10 feet of hose, order a quantity of 10.

What Does Type A Marine Fuel Hose Mean?

Marine fuel hose is classified according to its intended fuel-system use, permeation performance and fire-resistance requirements.

Type A hose meets the applicable marine fuel-hose performance standard and also meets the additional USCG fire-test requirement. This makes Type A hose the appropriate choice in marine installations where additional fire resistance is required.

Type A1 vs. Type A2

Classification General Application Permeation Class
Type A1 Fuel-feed hose, including tank-to-engine applications where Type A hose is required Lower permeation
Type A2 Certain fuel-fill and vent applications Higher permitted permeation than Class 1
Fuel Feed Applications: Use the Correct Type A Classification

For marine fuel-feed hose between the fuel tank and engine, federal requirements specifically identify USCG Type A1 as the Type A fuel-feed classification.

Always confirm the exact hose marking and requirements for your particular fuel-system installation before ordering.

When Should You Choose Type A Fuel Hose?

Type A fuel hose is generally selected when the fuel line is routed through an area where the installation requires the additional USCG fire-resistant hose classification.

This commonly includes many enclosed or below-deck installations, as well as other fuel-system layouts where Type A hose is specified by the boat builder, engine manufacturer or applicable regulation.

Complete Your 5/16" Fuel Line Setup

Oetiker 4-170 Clamp Oetiker 4-170 Ear Clamp - 10 Pack

Matching Oetiker ear clamp for the MPI 313-1 5/16" Type A marine fuel hose.

View Oetiker 4-170 Clamp
5/16 Primer Bulb Pro Marine 8004 - 5/16" Primer Bulb

5/16" primer bulb for compatible outboard fuel-line assemblies using 5/16" fuel hose.

View 5/16" Primer Bulb
Oetiker Pincer Oetiker Standard Jaw Pincer Tool

Pincer tool for properly closing Oetiker ear clamps during marine fuel-line installation.

View Oetiker Pincer Tool
Oetiker Clamp Pack Oetiker Clamp Pack with Tool

Complete assortment of commonly used marine Oetiker clamp sizes with the installation tool included.

View Oetiker Clamp Pack

Other 5/16" Fuel Hose Options

5/16 Type B Hose MPI 5/16" Type B1/B2 Fuel Hose - 315-056

Type B alternative for exposed and above-deck installations where Type B hose is permitted.

Matching Clamp: Oetiker 4-153

View 5/16" Type B Fuel Hose
Mercury Fuel Hose Mercury OEM 5/16" Silver Fuel Hose

Genuine Mercury Marine 5/16" bulk fuel hose for compatible Mercury outboard fuel-line applications.

Matching Clamp: Oetiker 4-145

View Mercury OEM Fuel Hose

5/16" Fuel Hose Comparison

Fuel Hose Type Recommended Clamp
MPI 313-1 Type A Low-Permeation Oetiker 4-170
MPI 315-056 Type B1/B2 Oetiker 4-153
Mercury OEM #100 Mercury Silver Fuel Hose Oetiker 4-145

Why Do Different 5/16" Hoses Use Different Clamps?

The 5/16" measurement describes the hose's inside diameter. It does not tell you the outside diameter.

Type A hose typically has a different construction and wall thickness than Type B or OEM hose, so its outside diameter can be larger even though all of the hoses have the same 5/16" inside diameter.

That is why the MPI 313-1 Type A hose uses the Oetiker 4-170 clamp, while the Type B hose uses 4-153 and the Mercury silver hose uses 4-145.

What This Fuel Hose is Used For

The MPI 313-1 Type A fuel hose is intended for building, repairing or replacing compatible marine fuel lines where a Type A fuel-hose classification is required.

Typical installations may include permanent marine fuel systems, enclosed routing areas and tank-to-engine applications requiring Type A1 fuel-feed hose.

Building a 5/16" Type A Fuel Line

Depending on the installation, a complete setup may require:

  • MPI 313-1 5/16" Type A fuel hose
  • Oetiker 4-170 ear clamps
  • 5/16" primer bulb
  • Correct tank-side fitting
  • Correct engine-side fitting or connector
  • Oetiker pincer installation tool

Key Features & Benefits

  • 5/16" inside diameter
  • MPI Products marine fuel hose
  • Type A marine fuel-hose construction
  • Low-permeation design
  • Suitable for applications requiring Type A fire resistance
  • Common choice for enclosed and below-deck installations
  • Sold by the foot
  • Matching Oetiker 4-170 clamp available
  • Compatible 5/16" primer bulb available
  • Type B and Mercury OEM 5/16" alternatives available

Need Help Choosing the Right Marine Fuel Hose?

Selecting the correct fuel hose depends on more than hose diameter. Installation location, fuel-hose classification, permeation rating, fittings, primer bulb and clamp size all matter.

Visit the Pro Marine Fuel Line Technical Center

FAQ

What size is MPI 313-1?
It has a 5/16" inside diameter.

Is this fuel hose sold by the foot?
Yes. Order the number of feet required for your installation.

What is Type A marine fuel hose?
Type A hose meets the applicable marine fuel-hose performance standard and the additional USCG fire-test requirement.

Can Type A hose be used below deck?
Type A hose is commonly selected for enclosed and below-deck installations where the additional fire-resistant classification is required.

What is the difference between Type A1 and A2?
Type A1 is the lower-permeation Type A classification typically used for fuel-feed applications. Type A2 permits greater permeation and is used for certain fill and vent applications.

Which clamp fits this hose?
Use the Oetiker 4-170 ear clamp with MPI 313-1.

Which primer bulb fits this hose?
The Pro Marine 8004 5/16" Primer Bulb matches the hose size.

What if I need an above-deck Type B fuel hose?
Pro Marine stocks the MPI 315-056 5/16" Type B1/B2 fuel hose .

Do you stock Mercury OEM 5/16" fuel hose?
Yes. The Mercury OEM 5/16" silver fuel hose is also available by the foot.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 continental U.S.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1-5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Parts must be new, unused and in original packaging.
  • Installed parts are not returnable.
  • Return authorization is required before sending items back.

Need help choosing the correct fuel hose?
Contact Pro Marine
Phone: 941-721-3000


Searchable Terms

313-1, MPI 313-1, 5/16 Type A fuel hose, 5/16 marine fuel hose, Type A1 fuel hose, Type A2 fuel hose, low permeation fuel hose, below deck fuel hose, enclosed marine fuel hose, marine fuel line by the foot, bulk marine fuel hose, tank to engine fuel hose, outboard fuel line, boat fuel hose, Oetiker 4-170, 4-170 fuel hose clamp, 5/16 primer bulb, marine primer bulb, Type A marine fuel line, USCG fuel hose

Item#:
313-1
Manufacturer:
MPI Products
Available:
In Stock
Your Price:
3.45
Each
Item#:
13791
Cross Reference#:
13791
54-13791
8M0214911
888988015
Manufacturer Item:
8M0214911
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
2.49
Each
Fits 1" to 2"
Item#:
200C
Manufacturer:
Mercruiser
Available:
Special Order
Your Price:
5.45
Each
This item is discontinued
11.3-13.8mm / .445-.543" Band Dim 7x0.6mm 316 SS
Item#:
4-138
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.62
Pack
10.8 - 13.3 mm / .425-.524" Band Dim 7x0.6mm 316 SS
Item#:
4-133
Cross Reference#:
884385
888441
Manufacturer Item:
888441
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
7.62
Pack
Item#:
850896
Cross Reference#:
850896
Manufacturer Item:
850896
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
2.99
Each
Item#:
855697
Cross Reference#:
54-855697
8M0204696
855697
888988028
Manufacturer Item:
8M0204696
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
2.59
Each
Item#:
855228
Cross Reference#:
0346152
0769072
855228
888988014
Manufacturer Item:
855228
Manufacturer:
Mercury Marine
Available:
In Stock
Your Price:
4.49
Each
Item#:
470R
Manufacturer:
TH Marine
Available:
In Stock
Your Price:
1.25
Each
Item#:
9139-9
Cross Reference#:
0349729
0769084
18-9139-9
Manufacturer Item:
349729
Manufacturer:
Sierra
Available:
In Stock
Your Price:
46.09
Each
Item#:
9138-9
Cross Reference#:
0349759
0769137
18-9138-9
Manufacturer Item:
349759
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
18.42
Each
This item is discontinued
|◀ ◀ 2437 - 2448 of 2777 ▶ ▶|
View: