S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
6P2-45501-01-00
Pro Marine Aftermarket Yamaha Lower Unit Components
Pro Marine 25-Inch Driveshaft – Yamaha F200 and F225 4-Stroke Outboards
The Pro Marine 69J-45501 Driveshaft is an aftermarket replacement lower unit driveshaft for select Yamaha F200, F225, LF200, and LF225 200–225 HP V6 4-stroke outboards.
Designed for the 25-inch (X) lower unit configuration, this driveshaft replaces Yamaha OEM part number 69J-45501-00-00.
The driveshaft transfers engine power from the outboard's crankshaft to the lower unit gearcase, allowing the gear assembly to drive the propeller. It is an essential component of the outboard's drivetrain.
This replacement is intended for select Yamaha F200 and F225 standard-rotation and LF200 and LF225 counter-rotation outboards, including the TXR, TUR, and XA model families listed below.
Important: Confirm the original driveshaft part number and 25-inch shaft configuration before ordering. Not every Yamaha 200–225 HP outboard uses the same driveshaft.
Product Information
- Pro Marine Part Number: 69J-45501
- Brand: Pro Marine Aftermarket
- Product Type: Lower Unit Driveshaft
- Replaces Yamaha OEM: 69J-45501-00-00
- Engine Manufacturer: Yamaha
- Engine Type: 4-Stroke V6 Outboard
- Horsepower: 200 HP and 225 HP
- Engine Families: F200, F225, LF200, LF225
- Application Years: 2002–Present on Listed Models
- Shaft Configuration: 25-Inch / X
- OEM Catalog Shaft Designation: X (25.3")
- Rotation: Standard and Counter-Rotation Applications
- Installation Location: Lower Unit / Gearcase
- Condition: New
OEM and Cross Reference Numbers
Pro Marine 69J-45501 is an aftermarket replacement for the following Yamaha OEM driveshaft.
| Brand | Part Number | Description |
|---|---|---|
| Pro Marine | 69J-45501 | Aftermarket 25-Inch Lower Unit Driveshaft |
| Yamaha OEM | 69J-45501-00-00 | Genuine Yamaha Drive Shaft Complete – X Configuration |
| Yamaha OEM Short Number | 69J-45501-00 | Yamaha Parts Catalog Reference |
What This Part Is Used For
The driveshaft is a critical component of a Yamaha outboard's lower unit. It connects the engine's power output to the gearcase and transfers rotational power to the lower unit gear assembly.
When the engine is operating, the driveshaft rotates and drives the pinion gear inside the lower unit. The gear assembly then transfers power to the propeller shaft.
A damaged or worn driveshaft can prevent the lower unit from transmitting power properly and may contribute to additional drivetrain damage.
Common Applications
- Yamaha F200 200 HP 4-stroke lower unit repairs
- Yamaha F225 225 HP 4-stroke lower unit repairs
- Yamaha LF200 counter-rotation lower unit repairs
- Yamaha LF225 counter-rotation lower unit repairs
- Replacement of damaged lower unit driveshafts
- Gearcase rebuilding and drivetrain repairs
- Lower unit service following impact damage
- Replacement of worn or damaged driveshaft splines
Important Driveshaft Fitment Note
This driveshaft is intended for select Yamaha F200, F225, LF200, and LF225 4-stroke outboards equipped with the 25-inch (X) lower unit configuration.
Yamaha offered multiple driveshaft lengths and lower unit configurations within these engine families.
The Yamaha OEM catalog identifies 69J-45501-00-00 as the X (25.3") driveshaft configuration.
This is commonly described as a 25-inch driveshaft application. The 25-inch designation refers to the outboard shaft configuration and should not be interpreted as the overall physical length of the loose driveshaft.
Do not order based on horsepower alone. Verify the original OEM part number, engine model, model year, and lower unit configuration before purchasing.
The model and year ranges below reflect the supplied application information. Actual compatibility must be confirmed against the specific Yamaha engine and lower unit parts diagram.
Compatible Yamaha Outboard Applications
Pro Marine 69J-45501 replaces Yamaha 69J-45501-00-00 on the following listed 200 HP and 225 HP V6 4-stroke engine families.
The applications include standard-rotation F-series engines and counter-rotation LF-series engines.
Yamaha F200 – 200 HP 4-Stroke
| Engine Family | Model Years | Applicable Models |
|---|---|---|
| Yamaha F200TXR | 2002–Present | F200TXRA, F200TXRB, F200TXRC, F200TXRD, F200TXR |
| Yamaha F200XA | 2006–Present | F200XA and listed XA variants |
Yamaha F225 – 225 HP 4-Stroke
| Engine Family | Model Years | Applicable Models |
|---|---|---|
| Yamaha F225TUR | 2002–Present | F225TURA, F225TURB, F225TURC, F225TURD, F225TUR |
| Yamaha F225TXR | 2002–Present | F225TXRA, F225TXRB, F225TXRC, F225TXRD, F225TXR |
| Yamaha F225XA | 2006–Present | F225XA and listed XA variants |
Yamaha LF200 – 200 HP Counter-Rotation 4-Stroke
| Engine Family | Model Years | Applicable Models |
|---|---|---|
| Yamaha LF200TXR | 2002–Present | LF200TXRA, LF200TXRB, LF200TXRC, LF200TXRD, LF200TXR |
| Yamaha LF200XA | 2006–Present | LF200XA and listed XA variants |
Yamaha LF225 – 225 HP Counter-Rotation 4-Stroke
| Engine Family | Model Years | Applicable Models |
|---|---|---|
| Yamaha LF225TUR | 2002–Present | LF225TURA, LF225TURB, LF225TURC, LF225TURD, LF225TUR |
| Yamaha LF225TXR | 2002–Present | LF225TXRA, LF225TXRB, LF225TXRC, LF225TXRD, LF225TXR |
Understanding Yamaha F and LF Model Designations
F200 / F225: Yamaha 200 HP and 225 HP 4-stroke outboard engine families.
LF200 / LF225: Counter-rotation versions of the Yamaha 200 HP and 225 HP 4-stroke outboard families.
25-Inch X Configuration: This driveshaft corresponds to Yamaha OEM 69J-45501-00-00. Confirm the specific lower unit configuration using the engine's model and parts diagram.
Common Symptoms and Replacement Reasons
A Yamaha outboard driveshaft may require replacement due to physical damage, corrosion, wear, or problems discovered during lower unit service.
Common Reasons for Driveshaft Replacement
- Worn or damaged driveshaft splines
- Corrosion or pitting on driveshaft surfaces
- Bent or twisted driveshaft
- Damage following a propeller or lower unit impact
- Excessive wear discovered during gearcase rebuilding
- Damaged driveshaft bearing surfaces
- Driveshaft damage caused by internal lower unit failure
- Replacement during a complete lower unit rebuild
Unusual drivetrain noise, vibration, or loss of propulsion may indicate a lower unit problem, but these symptoms are not specific to the driveshaft. Proper inspection is necessary to identify the cause.
Installation and Service Tips
Driveshaft replacement requires proper lower unit disassembly and inspection. Installation should be performed according to the appropriate Yamaha service manual.
Recommended Installation Practices
- Confirm the original Yamaha OEM driveshaft part number.
- Verify the engine model and 25-inch lower unit configuration.
- Inspect the original driveshaft for spline wear, bending, twisting, and corrosion.
- Inspect mating crankshaft and pinion gear splines for damage.
- Check driveshaft bearings, seals, and related gearcase components.
- Inspect the lower unit for water intrusion or internal corrosion.
- Follow Yamaha service manual procedures for gearcase disassembly and reassembly.
- Use the specified lubricants and assembly procedures.
- Verify proper gearcase operation before returning the outboard to service.
Lower unit driveshaft replacement may require specialized tools and inspection of internal gearcase components. Incorrect assembly can cause damage to the lower unit and drivetrain.
Key Features and Benefits
- Pro Marine Aftermarket Replacement: Alternative to Yamaha OEM driveshaft 69J-45501-00-00.
- 200–225 HP Applications: Fits select Yamaha F200 and F225 4-stroke V6 outboard models.
- Counter-Rotation Compatibility: Also listed for select LF200 and LF225 counter-rotation applications.
- 25-Inch Configuration: Designed for the specified Yamaha X lower unit application.
- Lower Unit Repair Component: Suitable for replacing a damaged driveshaft during compatible gearcase repairs.
- OEM Number Identification: Cross references Yamaha 69J-45501-00-00 for easier parts lookup.
- Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.
Frequently Asked Questions
What Yamaha OEM number does Pro Marine 69J-45501 replace?
Pro Marine 69J-45501 replaces Yamaha OEM 69J-45501-00-00, identified in Yamaha parts catalogs as a drive shaft complete assembly.
What Yamaha horsepower engines does this driveshaft fit?
This driveshaft is listed for select Yamaha 200 HP and 225 HP V6 4-stroke outboards, including F200, F225, LF200, and LF225 models.
What years does Yamaha 69J-45501-00-00 fit?
The supplied application data includes Yamaha models beginning in 2002, with later TXR, TUR, and XA applications listed as 2006–Present. Confirm the exact model and OEM parts diagram before ordering.
Is this a 25-inch Yamaha driveshaft?
Yes. This part is intended for the 25-inch X lower unit configuration. Yamaha identifies the OEM driveshaft as X (25.3") in applicable parts catalogs.
Does this driveshaft fit Yamaha F200 outboards?
Yes. It is listed for select F200TXR and F200XA 4-stroke outboard applications. Confirm the exact model and year.
Does this driveshaft fit Yamaha F225 outboards?
Yes. It is listed for select F225TUR, F225TXR, and F225XA applications using Yamaha OEM 69J-45501-00-00.
Does this driveshaft fit counter-rotation Yamaha outboards?
Yes. The supplied fitment includes select LF200 and LF225 counter-rotation models. Confirm the original driveshaft part number before ordering.
Will this fit every Yamaha 200 HP or 225 HP outboard?
No. Yamaha used different lower unit configurations and driveshafts across various models and years. This part should only be used where the applicable OEM driveshaft is 69J-45501-00-00.
What are common reasons to replace a Yamaha driveshaft?
Driveshafts are commonly replaced due to damaged splines, corrosion, bending, twisting, or damage discovered during lower unit repairs.
Is this a genuine Yamaha OEM driveshaft?
No. This is a Pro Marine aftermarket replacement for Yamaha OEM 69J-45501-00-00.
Can I install this driveshaft myself?
Lower unit driveshaft replacement requires proper gearcase service procedures and may require specialized tools. Professional installation is recommended.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, lower unit components, driveshafts, gearcase parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday–Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1–5 business days.
- Shipping times may vary based on destination, carrier service, and product availability.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning merchandise.
Need Help Confirming Driveshaft Fitment?
If you are unsure whether 69J-45501 is the correct driveshaft for your Yamaha outboard, contact Pro Marine with your engine model and serial number.
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
69J-45501, 69J-45501-00, 69J-45501-00-00
Searchable Terms
Pro Marine 69J-45501, Yamaha 69J-45501-00-00, Yamaha driveshaft, Yamaha 25 inch driveshaft, Yamaha X driveshaft, Yamaha outboard driveshaft, Yamaha lower unit driveshaft, Yamaha gearcase driveshaft, Yamaha 200HP driveshaft, Yamaha 225HP driveshaft, Yamaha F200 driveshaft, Yamaha F225 driveshaft, Yamaha LF200 driveshaft, Yamaha LF225 driveshaft, Yamaha F200TXR driveshaft, Yamaha F200XA driveshaft, Yamaha F225TUR driveshaft, Yamaha F225TXR driveshaft, Yamaha F225XA driveshaft, Yamaha LF200TXR driveshaft, Yamaha LF200XA driveshaft, Yamaha LF225TUR driveshaft, Yamaha LF225TXR driveshaft, Yamaha V6 4 stroke driveshaft, Yamaha 4 stroke lower unit parts, Yamaha counter rotation driveshaft, Yamaha lower unit repair, Yamaha gearcase rebuild, Yamaha outboard drivetrain parts, Yamaha drive shaft complete, aftermarket Yamaha driveshaft, Pro Marine Yamaha lower unit parts, 25 inch Yamaha lower unit shaft, Yamaha 200 225 HP driveshaft
Pro Marine Aftermarket Yamaha Lower Unit Components
Pro Marine 30-Inch Driveshaft – Yamaha F250 and LF250 250 HP 4-Stroke Outboards
The Pro Marine 6P2-45501-11 Driveshaft is an aftermarket replacement lower unit driveshaft for select Yamaha F250 and LF250 250 HP V6 4-stroke outboards.
Designed for the 30-inch outboard shaft configuration, this driveshaft cross references Yamaha OEM part numbers 6P2-45501-10-00 and 6P2-45501-11-00.
The driveshaft transfers rotational power from the engine to the lower unit gearcase, allowing the gear assembly to drive the propeller. It is an essential component of the outboard's drivetrain.
This replacement is listed for select F250 standard-rotation and LF250 counter-rotation outboard applications, including the BTUR, BTXR, TUR, TXR, UA, and XA model families.
Important: Verify the original Yamaha driveshaft part number, engine model, and 30-inch shaft configuration before ordering. Not every Yamaha F250 or LF250 uses the same driveshaft.
Product Information
- Pro Marine Part Number: 6P2-45501-11
- Brand: Pro Marine Aftermarket
- Product Type: Lower Unit Driveshaft
- Yamaha OEM Cross References: 6P2-45501-10-00, 6P2-45501-11-00
- Engine Manufacturer: Yamaha
- Engine Type: 4-Stroke V6 Outboard
- Horsepower: 250 HP
- Engine Families: F250 and LF250
- Listed Application Years: 2005–Present
- Shaft Configuration: 30-Inch Outboard
- Rotation Applications: Standard and Counter-Rotation
- Installation Location: Lower Unit / Gearcase
- Condition: New
OEM and Cross Reference Numbers
Pro Marine 6P2-45501-11 is an aftermarket replacement driveshaft associated with the following Yamaha OEM part numbers.
| Brand | Part Number | Description |
|---|---|---|
| Pro Marine | 6P2-45501-11 | Aftermarket 30-Inch Application Driveshaft |
| Yamaha OEM | 6P2-45501-10-00 | Yamaha Driveshaft Cross Reference |
| Yamaha OEM | 6P2-45501-11-00 | Yamaha Driveshaft Cross Reference |
What This Part Is Used For
The driveshaft is a major component of the Yamaha outboard lower unit. It transfers rotational power from the engine's crankshaft to the lower unit gear assembly.
As the engine operates, the driveshaft rotates the pinion gear inside the gearcase. The lower unit gears then transfer power to the propeller shaft, producing propulsion.
A damaged driveshaft can prevent proper power transfer and may contribute to additional gearcase damage.
Common Applications
- Yamaha F250 250 HP 4-stroke lower unit repairs
- Yamaha LF250 counter-rotation lower unit repairs
- Replacement of damaged driveshafts
- Lower unit and gearcase rebuilding
- Drivetrain repairs following lower unit damage
- Replacement of driveshafts with worn or damaged splines
- Repair of corrosion-damaged driveshafts
- Restoration of damaged lower unit drivetrain components
Important Driveshaft Fitment Note
This driveshaft is intended for select Yamaha F250 and LF250 250 HP V6 4-stroke outboards with the specified 30-inch shaft configuration.
Yamaha manufactured multiple lower unit and driveshaft configurations within the F250 and LF250 engine families.
The 30-inch designation identifies the outboard's shaft configuration and should not be interpreted as the overall physical length of the loose driveshaft.
Do not select a replacement driveshaft based on horsepower alone.
Confirm that the original Yamaha driveshaft matches 6P2-45501-10-00 or 6P2-45501-11-00.
Always verify the exact engine model, model year, shaft configuration, and OEM lower unit parts diagram before ordering.
Compatible Yamaha Outboard Applications
Pro Marine 6P2-45501-11 is listed for select Yamaha F250 and LF250 250 HP V6 4-stroke outboards.
The supplied fitment includes both standard-rotation and counter-rotation lower unit applications.
Yamaha F250 – 250 HP 4-Stroke
| Engine Family | Model Years | Applicable Models |
|---|---|---|
| Yamaha F250TUR | 2005–Present | F250TURD, F250TUR and listed TUR variants |
| Yamaha F250TXR | 2005–Present | F250TXRD, F250TXR and listed TXR variants |
| Yamaha F250BTUR | 2006–Present | F250BTUR |
| Yamaha F250BTXR | 2006–Present | F250BTXR |
| Yamaha F250UA | 2006–Present | F250UA and listed UA variants |
| Yamaha F250XA | 2006–Present | Listed F250XA variants |
Yamaha LF250 – 250 HP Counter-Rotation 4-Stroke
| Engine Family | Model Years | Applicable Models |
|---|---|---|
| Yamaha LF250TUR | 2005–Present | LF250TURD, LF250TUR and listed TUR variants |
| Yamaha LF250TXR | 2005–Present | LF250TXRD, LF250TXR and listed TXR variants |
| Yamaha LF250BTUR | 2006–Present | LF250BTUR |
| Yamaha LF250BTXR | 2006–Present | LF250BTXR |
| Yamaha LF250UA | 2006–Present | LF250UA and listed UA variants |
| Yamaha LF250XA | 2006–Present | Listed LF250XA variants |
Understanding Yamaha F250 and LF250 Model Designations
F250: Yamaha 250 HP V6 4-stroke outboard engine family.
LF250: Counter-rotation version of the Yamaha 250 HP V6 4-stroke outboard.
BTUR, BTXR, TUR, TXR, UA, and XA: Model designations used within the listed Yamaha F250 and LF250 application families.
30-Inch Configuration: This driveshaft is listed for the specified 30-inch lower unit application. Confirm the OEM part number and lower unit configuration before ordering.
Common Symptoms and Replacement Reasons
A Yamaha lower unit driveshaft may require replacement due to damage, corrosion, wear, or problems discovered during gearcase service.
Common Reasons for Driveshaft Replacement
- Worn or damaged driveshaft splines
- Corrosion or pitting on driveshaft surfaces
- Bent or twisted driveshaft
- Damage following propeller or lower unit impact
- Excessive wear discovered during gearcase rebuilding
- Damaged driveshaft bearing surfaces
- Internal lower unit drivetrain damage
- Replacement during a complete lower unit rebuild
Unusual drivetrain noise, vibration, or loss of propulsion may indicate a lower unit problem, but these symptoms are not specific to the driveshaft. Inspect the complete gearcase to identify the cause.
Installation and Service Tips
Driveshaft replacement requires proper lower unit disassembly, component inspection, and reassembly using the appropriate Yamaha service procedures.
Recommended Installation Practices
- Confirm the original Yamaha OEM driveshaft part number.
- Verify the exact engine model and 30-inch shaft configuration.
- Inspect the existing driveshaft for spline wear, bending, twisting, and corrosion.
- Inspect the mating crankshaft and pinion gear splines for damage.
- Check driveshaft bearings, seals, and related gearcase components.
- Inspect the lower unit for water intrusion or internal corrosion.
- Follow the appropriate Yamaha service manual for gearcase disassembly and reassembly.
- Use the specified lubricants, tools, and assembly procedures.
- Verify proper lower unit operation before returning the outboard to service.
Lower unit driveshaft replacement may require specialized tools and inspection of internal gearcase components. Incorrect installation can result in drivetrain or lower unit damage.
Key Features and Benefits
- Pro Marine Aftermarket Replacement: Alternative to Yamaha OEM driveshafts 6P2-45501-10-00 and 6P2-45501-11-00.
- 250 HP Yamaha Applications: Listed for select Yamaha F250 and LF250 V6 4-stroke outboard models.
- Counter-Rotation Compatibility: Also listed for select LF250 counter-rotation applications.
- 30-Inch Shaft Configuration: Intended for the specified Yamaha 30-inch outboard application.
- Lower Unit Repair Component: Used to replace a damaged driveshaft during compatible gearcase repairs.
- OEM Cross Reference Identification: References Yamaha 6P2-45501-10-00 and 6P2-45501-11-00 for parts lookup.
- Dealer Pricing Available: Qualified marine repair businesses can apply for wholesale pricing.
Frequently Asked Questions
What Yamaha OEM part numbers does Pro Marine 6P2-45501-11 replace?
Pro Marine 6P2-45501-11 cross references Yamaha OEM 6P2-45501-10-00 and 6P2-45501-11-00.
What Yamaha engines does this driveshaft fit?
This driveshaft is listed for select Yamaha F250 and LF250 250 HP V6 4-stroke outboards.
What years does this Yamaha F250 driveshaft fit?
The supplied fitment includes certain 2005 F250 and LF250 models, along with additional applications listed from 2006–Present. Confirm the exact engine model and OEM parts diagram.
Is this a 30-inch Yamaha driveshaft?
Yes. This driveshaft is intended for the specified 30-inch outboard shaft configuration. The designation refers to the outboard configuration, not necessarily the overall physical length of the loose part.
Does this driveshaft fit Yamaha F250 outboards?
Yes. It is listed for select F250BTUR, F250BTXR, F250TUR, F250TXR, F250UA, and F250XA model families.
Does this driveshaft fit Yamaha LF250 counter-rotation outboards?
Yes. The supplied applications include select LF250BTUR, LF250BTXR, LF250TUR, LF250TXR, LF250UA, and LF250XA models.
Will this fit every Yamaha 250 HP outboard?
No. Yamaha used different lower unit and driveshaft configurations across various 250 HP models and years. Confirm that the original OEM part number matches one of the listed cross references.
What are common reasons to replace a Yamaha driveshaft?
Driveshafts may require replacement due to damaged splines, corrosion, bending, twisting, or damage discovered during lower unit service.
Is this a genuine Yamaha OEM driveshaft?
No. This is a Pro Marine aftermarket replacement for the listed Yamaha OEM driveshaft numbers.
Can I install this driveshaft myself?
Lower unit driveshaft replacement requires proper gearcase service procedures and may require specialized tools. Professional installation is recommended.
Dealer Discounts & Store Policies
Wholesale Marine Parts Pricing
Pro Marine USA supplies genuine OEM and aftermarket marine engine parts, lower unit components, driveshafts, gearcase parts, and maintenance products to marine repair shops, dealerships, technicians, and retail customers.
Qualified marine businesses can apply for a Pro Marine dealer account to access wholesale pricing on eligible products.
Shipping Information
- Free shipping on orders over $100 within the continental United States.
- In-stock orders received before 5:30 PM EST ship the same business day, Monday–Friday.
- Shipping options available through UPS, USPS, and FedEx.
- Typical delivery time is 1–5 business days.
- Shipping times may vary based on destination, carrier service, and product availability.
30-Day Return Policy
- Eligible returns are accepted within 30 days.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before returning merchandise.
Need Help Confirming Driveshaft Fitment?
If you are unsure whether 6P2-45501-11 is the correct driveshaft for your Yamaha F250 or LF250, contact Pro Marine with your engine model and serial number.
Contact Pro Marine USA or call 941-721-3000.
Searchable Part Numbers
6P2-45501-11, 6P2-45501-10, 6P2-45501-10-00, 6P2-45501-11-00
Searchable Terms
Pro Marine 6P2-45501-11, Yamaha 6P2-45501-10-00, Yamaha 6P2-45501-11-00, Yamaha driveshaft, Yamaha 30 inch driveshaft, Yamaha outboard driveshaft, Yamaha lower unit driveshaft, Yamaha gearcase driveshaft, Yamaha 250HP driveshaft, Yamaha F250 driveshaft, Yamaha LF250 driveshaft, Yamaha F250BTUR driveshaft, Yamaha F250BTXR driveshaft, Yamaha F250TUR driveshaft, Yamaha F250TXR driveshaft, Yamaha F250UA driveshaft, Yamaha F250XA driveshaft, Yamaha LF250BTUR driveshaft, Yamaha LF250BTXR driveshaft, Yamaha LF250TUR driveshaft, Yamaha LF250TXR driveshaft, Yamaha LF250UA driveshaft, Yamaha LF250XA driveshaft, Yamaha V6 4 stroke driveshaft, Yamaha 4 stroke lower unit parts, Yamaha counter rotation driveshaft, Yamaha lower unit repair, Yamaha gearcase rebuild, Yamaha outboard drivetrain parts, aftermarket Yamaha driveshaft, Pro Marine Yamaha lower unit parts, 30 inch Yamaha lower unit shaft, Yamaha 250 HP lower unit driveshaft
6P2-45501-11-00
69J-45318-01-00
6G5-45501-21-00
6G5-45501-22-00
Pro Marine Cooling System Component
Yamaha V4 V6 115-300HP & Mercury 225/250 Driveshaft Collar
The Pro Marine 45527P Driveshaft Collar is a quality aftermarket replacement for Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901. This component is used within the lower unit water pump assembly on a wide range of Yamaha V4 and V6 outboards as well as Mercury 225 and 250 EFI FourStroke models.
Designed to provide dependable fit and performance, the Pro Marine 45527P is an excellent replacement during water pump rebuilds, cooling system repairs, and preventative maintenance service.
Compatible Applications
Yamaha OEM number 61A-45527-00-00 is used across numerous Yamaha V4 and V6 outboards including EFI, Saltwater Series, OX66, HPDI, VMAX, and select four-stroke applications. Mercury OEM 8886901 is used on Mercury 225 and 250 EFI FourStroke outboards.
| Manufacturer | Common Applications |
|---|---|
| Yamaha | 115HP, C115, S115 |
| Yamaha | 130HP, L130 |
| Yamaha | 150HP, C150, D150, DX150, FL150, LF150, LX150, SX150, VX150, VZ150, Z150 |
| Yamaha | 175HP Models |
| Yamaha | 200HP, F200, LF200, LX200, SX200, VX200, VZ200, Z200 |
| Yamaha | 225HP, F225, LF225, LX225, VX225, V225, VMAX 225, OX66 225 |
| Yamaha | 250HP, L250, LX250, SX250, VX250, VZ250, Z250, OX66 250 |
| Yamaha | 300HP, LZ300, VZ300, Z300 |
| Mercury | 225 EFI FourStroke |
| Mercury | 250 EFI FourStroke |
Yamaha utilized this driveshaft collar across multiple V4 and V6 platforms over numerous model years. Always verify your engine serial number and OEM part number before ordering replacement cooling system components.
This Pro Marine collar replaces Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
OEM & Cross Reference Numbers
| Type | Part Number |
|---|---|
| Pro Marine | 45527P |
| Yamaha OEM | 61A-45527-00-00 |
| Mercury OEM | 8886901 |
| Sierra | 18-9076 |
| GLM | 9076GM |
| Mercury OEM Part | 45527 |
Other Brands Available
Mercury OEM 45527
Genuine Mercury OEM driveshaft collar manufactured to factory specifications.
View OEM Version
GLM 9076GM
Alternative aftermarket option from GLM Marine for the same applications.
View GLM VersionWhy Choose Pro Marine Parts?
Pro Marine replacement parts are trusted by marine technicians, repair facilities, and boat owners throughout the industry. They provide dependable fitment and performance while offering an economical alternative to OEM components.
- Quality aftermarket replacement
- Direct replacement for Yamaha 61A-45527-00-00
- Direct replacement for Mercury 8886901
- Designed for marine cooling system applications
- Excellent choice for preventative maintenance and repairs
- Cost-effective alternative to OEM pricing
What This Part Is Used For
The driveshaft collar helps maintain proper alignment within the lower unit water pump assembly. It works together with the impeller housing, wear plate, spacer components, and driveshaft to ensure proper cooling system operation.
During water pump service, many technicians replace collars and related components together to restore the cooling system to proper operating condition.
Pro Marine 45527P Features
- Fits Yamaha V4 and V6 applications from 115HP through 300HP
- Fits Mercury 225 and 250 EFI FourStroke models
- Replaces Yamaha OEM 61A-45527-00-00
- Replaces Mercury OEM 8886901
- Ideal for water pump rebuilds and lower unit service
- Corrosion-resistant marine-grade construction
FAQ
What OEM numbers does Pro Marine 45527P replace?
It replaces Yamaha 61A-45527-00-00 and Mercury 8886901.
What engines commonly use this collar?
Many Yamaha V4 and V6 outboards from 115HP through 300HP as well as Mercury 225 and 250 EFI FourStroke applications.
Is this an OEM Mercury part?
No. This is a Pro Marine aftermarket replacement. The genuine Mercury version is linked above.
Do you carry other brands?
Yes. We also stock Mercury OEM, Sierra, and GLM versions of this driveshaft collar.
Should I replace this during a water pump rebuild?
If wear, corrosion, or damage is found during inspection, replacement is recommended while the lower unit is apart.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization required before return.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
45527P, Pro Marine 45527P, Yamaha 61A-45527-00-00, Mercury 8886901, Yamaha V4 driveshaft collar, Yamaha V6 driveshaft collar, Yamaha OX66 water pump parts, Yamaha VMAX cooling system parts, Yamaha 225 driveshaft collar, Yamaha 250 driveshaft collar, Mercury 225 EFI FourStroke parts, Mercury 250 EFI FourStroke parts, Sierra 18-9076, GLM 9076GM, Mercury OEM 45527
61A-45527-00-00
8886901
Genuine Mercury OEM Part
Mercury 225/250 EFI FourStroke & Yamaha V4 V6 Driveshaft Collar
The Mercury OEM 45527 Driveshaft Collar is a genuine factory replacement component used within the lower unit cooling system and water pump assembly. This collar replaces Mercury OEM 8886901 and cross references Yamaha OEM 61A-45527-00-00.
Designed and manufactured to Mercury's original specifications, this collar is used on Mercury 225 and 250 EFI FourStroke outboards as well as many Yamaha V4 and V6 applications utilizing the same cooling system design. Genuine OEM parts help ensure factory fit, proper tolerances, and reliable long-term performance.
Compatible Applications
Mercury OEM number 8886901 is used on Mercury 225 and 250 EFI FourStroke models. Yamaha OEM number 61A-45527-00-00 is found across a broad range of Yamaha V4 and V6 outboards including Saltwater Series, EFI, OX66, VMAX, and select four-stroke applications.
| Manufacturer | Common Applications |
|---|---|
| Mercury | 225 EFI FourStroke |
| Mercury | 250 EFI FourStroke |
| Yamaha | 115HP, C115, S115 |
| Yamaha | 130HP, L130 |
| Yamaha | 150HP, C150, D150, DX150, FL150, LF150, LX150, SX150, VX150, VZ150, Z150 |
| Yamaha | 175HP Models |
| Yamaha | 200HP, F200, LF200, LX200, SX200, VX200, VZ200, Z200 |
| Yamaha | 225HP, F225, LF225, LX225, VX225, V225, VMAX 225, OX66 225 |
| Yamaha | 250HP, L250, LX250, SX250, VX250, VZ250, Z250, OX66 250 |
| Yamaha | 300HP, LZ300, VZ300, Z300 |
Mercury and Yamaha used multiple lower unit and water pump configurations across different model years. Always verify your engine serial number and OEM part number before ordering.
This genuine Mercury collar replaces OEM 8886901 and cross references Yamaha OEM 61A-45527-00-00.
OEM & Cross Reference Numbers
| Type | Part Number |
|---|---|
| Mercury OEM | 45527 |
| Mercury OEM | 8886901 |
| Yamaha OEM | 61A-45527-00-00 |
| Sierra | 18-9076 |
| Pro Marine | 45527P |
| GLM | 9076GM |
Alternative Brands Available
Pro Marine 45527P
Popular aftermarket replacement trusted by marine technicians.
View Pro Marine VersionWhy Choose Genuine Mercury OEM Parts?
Mercury OEM components are manufactured to the same specifications used when your outboard was originally built. Genuine factory parts provide the fit, materials, and tolerances Mercury engineers intended for long-term reliability.
- Genuine Mercury OEM component
- Original factory specifications
- Direct replacement for Mercury 8886901
- Cross references Yamaha 61A-45527-00-00
- Factory-correct repair solution
- Designed for water pump and cooling system service
What This Part Is Used For
The driveshaft collar is a component within the lower unit water pump assembly. It helps properly locate and support cooling system components, ensuring correct alignment and operation of the water pump system.
During water pump service, technicians commonly inspect collars, spacers, wear plates, impellers, seals, and housings together to ensure maximum cooling system reliability.
FAQ
Is this a genuine Mercury OEM part?
Yes. This is a genuine Mercury OEM driveshaft collar.
What Mercury engines use OEM 8886901?
Mercury 225 and 250 EFI FourStroke applications commonly use this driveshaft collar.
Does this cross reference Yamaha 61A-45527-00-00?
Yes. Mercury OEM 8886901 cross references directly to Yamaha OEM 61A-45527-00-00.
Do you carry aftermarket alternatives?
Yes. Sierra, Pro Marine, and GLM versions are linked above.
Should this be inspected during water pump service?
Yes. Inspect the collar whenever the lower unit is apart for water pump maintenance and replace it if wear, corrosion, or damage is present.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization required before return.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
Mercury 45527, 45527, Mercury 8886901, Yamaha 61A-45527-00-00, OEM driveshaft collar, Mercury 225 EFI FourStroke driveshaft collar, Mercury 250 EFI FourStroke driveshaft collar, Yamaha V4 driveshaft collar, Yamaha V6 driveshaft collar, Yamaha OX66 water pump parts, Yamaha VMAX water pump parts, Sierra 18-9076, Pro Marine 45527P, GLM 9076GM, Mercury cooling system parts
61A-45527-00-00
8886901
GLM Marine Replacement Component
Yamaha V4 V6 115-300HP & Mercury 225/250 Driveshaft Collar
The GLM 9076GM Driveshaft Collar is an aftermarket replacement designed for Yamaha and Mercury outboards utilizing Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901. Installed within the water pump assembly, this collar helps maintain proper alignment of critical cooling system components.
Whether you're rebuilding a complete water pump, servicing a lower unit, or performing preventative maintenance, the GLM 9076GM offers a dependable replacement option for a wide range of Yamaha V4 and V6 outboards as well as Mercury EFI FourStroke models.
OEM Numbers & Cross References
The GLM 9076GM cross references directly to Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
| Manufacturer | Part Number |
|---|---|
| GLM Marine | 9076GM |
| Yamaha OEM | 61A-45527-00-00 |
| Mercury OEM | 8886901 |
| Pro Marine | 45527P |
| Sierra | 18-9076 |
| Mercury OEM Part | 45527 |
Compatible Applications
Yamaha OEM 61A-45527-00-00 is used across a broad range of Yamaha V4 and V6 engines, including many Saltwater Series, EFI, OX66, VMAX, and four-stroke models. Mercury OEM 8886901 is commonly found on Mercury 225 and 250 EFI FourStroke outboards.
| Manufacturer | Common Applications |
|---|---|
| Yamaha | 115HP, C115, S115 |
| Yamaha | 130HP, L130 |
| Yamaha | 150HP, C150, D150, DX150, FL150, LF150, LX150, SX150, VX150, VZ150, Z150 |
| Yamaha | 175HP Models |
| Yamaha | 200HP, F200, LF200, LX200, SX200, VX200, VZ200, Z200 |
| Yamaha | 225HP, F225, LF225, LX225, VX225, V225, OX66 225, VMAX 225 |
| Yamaha | 250HP, L250, LX250, SX250, VX250, VZ250, Z250, OX66 250 |
| Yamaha | 300HP, LZ300, VZ300, Z300 |
| Mercury | 225 EFI FourStroke |
| Mercury | 250 EFI FourStroke |
Yamaha used several lower unit and water pump designs across various engine families. Always confirm your OEM part number before ordering.
This GLM collar replaces Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
Alternative Brands Available
Mercury OEM 45527
Genuine Mercury factory replacement for customers seeking original equipment parts.
View OEM Version
Pro Marine 45527P
Popular aftermarket replacement used by marine repair shops and technicians.
View Pro Marine VersionDesigned for Water Pump Service & Rebuilds
The driveshaft collar works as part of the lower unit cooling system assembly. During water pump service, technicians frequently inspect and replace collars, spacers, wear plates, seals, and impellers together to help restore proper cooling system performance.
Because these components operate in a harsh marine environment, replacing worn parts during maintenance can help reduce the likelihood of future cooling system issues.
GLM 9076GM Features
- Replaces Yamaha OEM 61A-45527-00-00
- Replaces Mercury OEM 8886901
- Fits Yamaha V4 and V6 applications from 115HP through 300HP
- Fits Mercury 225 and 250 EFI FourStroke models
- Designed for lower unit cooling system repairs
- Ideal for water pump rebuilds and preventative maintenance
- Cost-effective aftermarket replacement
Why Choose GLM Marine Parts?
GLM Marine has supplied aftermarket marine engine components for decades and is well known throughout the boating industry for offering dependable replacement parts for outboard, sterndrive, and inboard applications.
The GLM 9076GM provides boat owners and marine technicians with a practical alternative to OEM components while maintaining compatibility with the original application.
FAQ
What OEM numbers does GLM 9076GM replace?
Yamaha 61A-45527-00-00 and Mercury 8886901.
What engines commonly use this driveshaft collar?
Many Yamaha V4 and V6 engines from 115HP through 300HP as well as Mercury 225 and 250 EFI FourStroke models.
Is this a genuine Mercury part?
No. This is a GLM Marine aftermarket replacement. The Mercury OEM version is linked above.
Do you stock other brands?
Yes. We also carry Mercury OEM, Pro Marine, and Sierra versions of this driveshaft collar.
When should this part be replaced?
The collar should be inspected during water pump service and replaced if wear, corrosion, or damage is present.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new and unused.
- Installed parts are not returnable.
- Return authorization required before returning merchandise.
Need assistance?
Contact Us
Phone: 941-721-3000
Searchable Terms
GLM 9076GM, 9076GM, Yamaha 61A-45527-00-00, Mercury 8886901, Yamaha V4 driveshaft collar, Yamaha V6 driveshaft collar, Yamaha OX66 water pump parts, Yamaha VMAX cooling system parts, Yamaha 225 driveshaft collar, Yamaha 250 driveshaft collar, Mercury 225 EFI FourStroke driveshaft collar, Mercury 250 EFI FourStroke driveshaft collar, Pro Marine 45527P, Sierra 18-9076, Mercury OEM 45527, GLM Marine replacement parts
61A-45527-00-00
8886901
93101-25M03-00