Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1309 - 1320 of 2557 ▶ ▶|
View:
Johnson/Evinrude Bore Size 3.645
Item#:
3645KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Johnson/Evinrude 20-70hp 2&3cy
Item#:
18-1241
Cross Reference#:
0316331
0316332
0332696
0332708
0336405
0338880
0338881
0343512
0765552
0777740
316331
332696
338880
338881
343512
765552
777740
Manufacturer Item:
338880
Manufacturer:
Sierra
Available:
In Stock
Your Price:
7.19
Each
Johnson/Evinrude Bore Size 3.884
Item#:
3884KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Johnson/Evinrude V6 Looper
Item#:
1980
Cross Reference#:
0331598
0777970
18-0978
331598
35730
777970
878727
Manufacturer Item:
331598
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.49
Each
Johnson/Evinrude V6 Looper
Item#:
1969
Cross Reference#:
0337068
0777851
18-0412
337068
36870
777851
878669
Manufacturer Item:
337068
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.67
Each
Johnson/Evinrude 60-300hp
Item#:
1960
Cross Reference#:
0320880
0778200
18-1219
320880
46100
778200
878744
Manufacturer Item:
320880
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.31
Each
Johnson/Evinrude 120-250hp V4 V6 Looper
Item#:
1977
Cross Reference#:
0326838
0332319
0777744
18-0987
326838
332319
35750
777744
878732
9-60450
Manufacturer Item:
332319
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.76
Each
Johnson/Evinrude V4 Looper
Item#:
1976
Cross Reference#:
0331101
0769687
331101
35500
769687
Manufacturer Item:
331101
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
14.86
Each
Johnson/Evinrude V6 Looper
Item#:
1979
Cross Reference#:
0331532
0777450
18-0161
331532
35540
777450
878645
9-60443
Manufacturer Item:
331532
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
4.19
Each
Johnson/Evinrude 120-140hp V8 Looper
Item#:
1973
Cross Reference#:
0328626
0777971
18-0144
328626
35400
777971
878639
9-60447
Manufacturer Item:
328626
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
2.03
Each
Johnson/Evinrude 120-250hp V4 V6 Looper
Item#:
1972
Cross Reference#:
0328622
0777417
18-0142
328622
35390
777417
878638
9-60442
Manufacturer Item:
328622
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
9.19
Each
Johnson/Evinrude 275/300hp V8
Item#:
1975
Cross Reference#:
18-0140
328604
35380
769641
878637
Manufacturer Item:
328604
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
2.71
Each
|◀ ◀ 1309 - 1320 of 2557 ▶ ▶|
View: