Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1321 - 1332 of 2557 ▶ ▶|
View:
Johnson/Evinrude V6 Looper
Item#:
1974
Cross Reference#:
0332266
0777411
18-0130
332266
35740
777411
878633
9-60446
Manufacturer Item:
332266
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.79
Each
Johnson/Evinrude 40-70HP 2-3Cy
Item#:
1100R
Cross Reference#:
0434107
0778452
434107
778452
802454
Manufacturer Item:
391170
Manufacturer:
ProX
Available:
In Stock
Your Price:
29.99
Each
Johnson/Evinrude 40-70hp 2 & 3 cyls
Item#:
1936
Cross Reference#:
0336530
0777867
18-2709
33150
336530
777867
878832
Manufacturer Item:
336530
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
1.99
Each
Johnson/Evinrude
Item#:
340200
Cross Reference#:
0340200
340200
Manufacturer Item:
340200
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
15.29
Each
Evinrude E-Tec 200-300 Ficht 200-300 1999 & Up
Item#:
339299
Cross Reference#:
0339299
0765618
339299
765618
Manufacturer Item:
339299
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
6.29
Each
Johnson/Evinrude 40-225hp 1993 & Later
Item#:
10-1155
Cross Reference#:
0339044
0765579
339044
765579
Manufacturer Item:
339044
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.40
Each
Johnson/Evinrude Bore Size 3.655
Item#:
3655KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
J/E 35-50hp 2Cyl 1985-Up
Item#:
18-0159
Cross Reference#:
0330909
0777766
330909
777766
878644
Manufacturer Item:
330909
Manufacturer:
Sierra
Available:
In Stock
Your Price:
14.09
Each
Johnson/Evinrude 35-60hp 2cyl
Item#:
0851
Cross Reference#:
0315865
0329826
0777985
18-0851
315826
329826
35420
777985
878694
Manufacturer Item:
329826
Manufacturer:
Johnson/Evinrude
Available:
Out of Stock
Your Price:
5.49
Each
This item is discontinued
Johnson/Evinrude 150/175 Eagle 91-92 60º Bore Size 3.600
Item#:
3096
Cross Reference#:
0433096
0778421
14170
433096
778421
Manufacturer Item:
433096
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
28.79
Each
Johnson/Evinrude 9.9-15hp Gasket, Water Cover
Item#:
18-2905
Cross Reference#:
0321387
0329920
0777393
321387
329920
34580
777393
802298
Manufacturer Item:
329920
Manufacturer:
Sierra
Available:
In Stock
Your Price:
4.65
Each
Johnson/Evinrude Bore Size 3.520
Item#:
3520KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
|◀ ◀ 1321 - 1332 of 2557 ▶ ▶|
View: