Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1333 - 1344 of 2557 ▶ ▶|
View:
Johnson/Evinrude 40-130hp
Item#:
13240
Cross Reference#:
0339207
0343141
0769795
339027
343141
Manufacturer Item:
343141
Manufacturer:
GLM
Available:
Out of Stock
Your Price:
23.24
Each
Johnson/Evinrude Bore Size 3.187
Item#:
3187KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
51.27
Each
Johnson/Evinrude 95-Up Bore Size 2.217
Item#:
2956-1
Cross Reference#:
0436973
Manufacturer Item:
436973
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
49.97
PAIR
Johnson/Evinrude Bore Size 3.530
Item#:
3530KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Johnson/Evinrude 90-115hp 60º Eagle Series 1995-2000
Item#:
3358
Cross Reference#:
0335818
0778358
10-3358
18-1283
335818
515-37
778358
86211
Manufacturer Item:
335818
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
8.39
Each
Johnson/Evinrude 90-115hp 60º Eagle Series1995-2000
Item#:
3359
Cross Reference#:
0335819
0778360
10-3359
18-1284
335819
515-38
778360
Manufacturer Item:
335819
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
6.76
Each
Johnson/Evinrude Bore Size 3.544
Item#:
3544KD
Manufacturer:
Wiseco
Available:
In Stock
Your Price:
49.95
Each
Item#:
205C
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
10.25
Each
This item is discontinued
Johnson/Evinrude 40-250hp
Item#:
2206
Cross Reference#:
0329830
0777385
18-1202
329830
35440
777385
878738
Manufacturer Item:
329830
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.16
Each
Johnson/Evinrude 120-300hp Loopers
Item#:
2210
Cross Reference#:
0394408
0777842
18-1222
394408
46130
777842
878746
Manufacturer Item:
394408
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
10.49
Each
Johnson/Evinrude 85-140hp V4 Crossflow
Item#:
930
Cross Reference#:
0314963
0316129
0319174
0777406
18-2867
18-2867
314963
316129
316963
319174
33180
777406
802271
9-60438
Manufacturer Item:
319174
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
3.89
Each
Johnson/Evinrude 150-235 V6 Crossflow
Item#:
949
Cross Reference#:
0321184
0777383
18-2546
18-2546
321184
33600
777383
777833
802050
9-60449
Manufacturer Item:
321184
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.60
Each
|◀ ◀ 1333 - 1344 of 2557 ▶ ▶|
View: