Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1345 - 1356 of 2557 ▶ ▶|
View:
Johnson/Evinrude 85-140hp V4 Crossflow
Item#:
952
Cross Reference#:
0321897
0332369
0777894
175267
18-0977
18-0977-9
321897
332369
33650
777894
777994
878726
879601
9-60448
Manufacturer Item:
332369
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.20
Each
Johnson/Evinrude 150-200 V6 Crossflow
Item#:
969
Cross Reference#:
0321198
0329718
0777442
18-0148
321198
329718
33610
777442
878640
Manufacturer Item:
329718
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
6.55
Each
Johnson/Evinrude V4 V6
Item#:
976
Cross Reference#:
0324701
0338484
0777844
18-2557
18-2557
324701
33730
338484
777844
802059
9-60401
Manufacturer Item:
338484
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
2.47
Each
Johnson/Evinrude 88-235hp V4 V6 Crossflow
Item#:
971
Cross Reference#:
0316653
0321907
0777439
18-0991
316653
321907
33660
777439
878734
Manufacturer Item:
321907
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.01
Each
Johnson/Evinrude
Item#:
977
Cross Reference#:
0303355
0777920
18-2892
303355
34050
777920
802210
Manufacturer Item:
303355
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
0.94
Each
Johnson/Evinrude 85-140hp V4 Crossflow
Item#:
985
Cross Reference#:
0321722
0777922
18-0985
321722
33630
777922
878731
Manufacturer Item:
321722
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
4.40
Each
Johnson/Evinrude 150/175hp 60º V6 Eagle Series
Item#:
6227
Cross Reference#:
0336227
0344347
0769419
10-6227
18-0693
334347
336227
36580
515-41
769419
Manufacturer Item:
336227
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
31.49
Each
Johnson/Evinrude 150/175hp 60º V6 Eagle Series
Item#:
6226
Cross Reference#:
0336226
0344341
0769411
10-6226
18-0694
334341
334341
336226
336226
36570
36570
515-40
769411
Manufacturer Item:
336226
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
28.34
Each
Johnson/Evinrude 175/235 XFlow Bore Size 3.655
Item#:
8130
Cross Reference#:
0390510
18-3908
24590
802102
9-54438
Manufacturer Item:
390510
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
31.14
Each
Johnson/Evinrude 25/35hp 2 Cyl
Item#:
479
Cross Reference#:
0321479
0777410
18-0981
321479
34390
777410
878729
Manufacturer Item:
321479
Manufacturer:
Sierra
Available:
In Stock
Your Price:
4.75
Each
Johnson/Evinrude 200-300 3.3L 2001-2012
Item#:
5046
Cross Reference#:
0769269
5005046
Manufacturer Item:
5005046
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
47.99
Each
Johnson/Evinrude 90-115hp 60de Eagle Series
Item#:
6389
Cross Reference#:
0336389
0345045
0769428
18-0695
336389
345045
36530
769428
Manufacturer Item:
336389
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
30.40
Each
|◀ ◀ 1345 - 1356 of 2557 ▶ ▶|
View: