Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1369 - 1380 of 2557 ▶ ▶|
View:
Johnson/Evinrude 50-75hp 3 Cyl
Item#:
770
Cross Reference#:
0321794
0777763
10-770
18-0989
321794
777763
878733
Manufacturer Item:
321794
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.46
Each
Johnson/Evinrude 150-235 V6 Crossflow
Item#:
764
Cross Reference#:
0321183
0777458
10-764
18-0979
321183
34380
777458
878728
Manufacturer Item:
321183
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.17
Each
Johnson/Evinrude 85-140hp V4 Crossflow
Item#:
760
Cross Reference#:
0303355
0321932
0777382
0777920
18-0675
303355
321932
34050
777382
777920
802210
Manufacturer Item:
321932
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
0.72
Each
Johnson/Evinrude 60-75hp 3cyl
Item#:
777
Cross Reference#:
0317226
0332108
0777419
18-2548
317226
332108
34630
777419
802071
Manufacturer Item:
332108
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.84
Each
Johnson/Evinrude 50-70hp 3 cyl
Item#:
774
Cross Reference#:
0317307
0326926
0777446
10-774
18-1212
317307
326926
34530
777446
878742
9-60439
Manufacturer Item:
326926
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.06
Each
Johnson/Evinrude 60-75hp 3 cyl
Item#:
773
Cross Reference#:
0313424
0317305
0777477
10-773
18-0951
313424
317305
34860
777477
878713
Manufacturer Item:
317305
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
3.74
Each
Johnson/Evinrude 9.9-15 Bore Size 2.375
Item#:
5218
Cross Reference#:
0435218
0778398
435218
778398
Manufacturer Item:
435218
Manufacturer:
Engineered Marine Parts
Available:
Special Order
Your Price:
20.06
Each
This item is discontinued
Johnson Evinrude 9.9-15hp
Item#:
8430
Cross Reference#:
18-3933
23730
802490
9-54406
Manufacturer Item:
386280
Manufacturer:
Sierra
Available:
In Stock
Your Price:
49.89
Each
Johnson/Evinrude 200-300 3.3L 2001-2012
Item#:
4935
Cross Reference#:
0769835
5004935
769835
Manufacturer Item:
5004935
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
53.99
Each
Evinrude 200-300hp E-tec
Item#:
4934
Cross Reference#:
0350934
0769346
350934
769346
Manufacturer Item:
350934
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
9.61
Each
Johnson Evinrude 120-300hp 1988-1992 Big Bore Looper
Item#:
875
Cross Reference#:
24270
Manufacturer:
Vertex
Available:
In Stock
Your Price:
34.41
Each
Johnson Evinrude 120-300hp 1988-1992 Big Bore Looper
Item#:
870
Cross Reference#:
0431870
0778376
18-3975
18-3975
24520
431870
778376
9-54432
Manufacturer Item:
431870
Manufacturer:
Pro Marine
Available:
Out of Stock
Your Price:
30.85
Each
|◀ ◀ 1369 - 1380 of 2557 ▶ ▶|
View: