Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1489 - 1500 of 2557 ▶ ▶|
View:
Johnson/Evinrude 60-75hp 3cyl
Item#:
3895
Cross Reference#:
0332816
18-3895
18-3895
332816
332816
35830
35830
879515
Manufacturer Item:
332816
Manufacturer:
Sierra
Available:
In Stock
Your Price:
15.39
Each
Johnson/Evinrude V6 BB X Flow 175 & 235 HP
Item#:
3897
Cross Reference#:
0332818
18-3897
332818
35960
879517
Manufacturer Item:
332818
Manufacturer:
GLM
Available:
In Stock
Your Price:
59.17
Each
Johnson/Evinrude 275/300hp V8 Small Bore Looper 85-87
Item#:
3840
Cross Reference#:
18-3840
329786
802063
9-63831
Manufacturer Item:
329786
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
62.49
Each
Johnson/Evinrude 3-4.5 hp
Item#:
3841
Cross Reference#:
0203130
0777405
18-3841
18-3841-2
18-3841-2
203130
34010
777405
802012
Manufacturer Item:
203130
Manufacturer:
Sierra
Available:
Out of Stock
ETA:
12/01/2026
Your Price:
10.29
Each
Johnson/Evinrude 120/140 V4 Small Bore Looper 85-87
Item#:
3837
Cross Reference#:
0328623
0777463
10-3837
18-3837
328623
34400
777463
802061
9-63820
Manufacturer Item:
328623
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
47.37
Each
Johnson/Evinrude 200-225hp V6 Small Bore Looper
Item#:
3838
Cross Reference#:
10-3838
18-3838
331211
777470
802070
9-63822
Manufacturer Item:
331211
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
38.92
Each
Johnson/Evinrude 60-65hp 3 Cyl
Item#:
3836
Cross Reference#:
0329836
0777408
10-3836
18-3836
18-3836
329836
777408
802064
878842
9-63821
Manufacturer Item:
329836
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
20.80
Each
Johnson/Evinrude 185-225hp V6 Big Bore Looper
Item#:
3839
Cross Reference#:
0333670
0334726
0777420
18-3839
18-3839
333670
333670
334726
334726
34590
777420
802075
878879
9-63825
Manufacturer Item:
334726
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
11/09/2026
Your Price:
20.28
Each
Johnson/Evinrude 9.9-15hp 2cyl
Item#:
222
Cross Reference#:
0338222
0778195
338222
36020
778195
879004
Manufacturer Item:
338222
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
21.01
Each
Force 85-125 Chrylser 70-140
Item#:
1246
Cross Reference#:
F85279
F85279-1
F85279-2
F852791
F852792
27-819381
37230
819381
Manufacturer Item:
F85279-2
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
10.70
Each
Johson/Evinrude V4 V6
Item#:
049-1
Cross Reference#:
0320499
0352960
0777367
352960
777367
Manufacturer Item:
320499
Manufacturer:
Mercury Marine
Available:
Special Order
Your Price:
85.95
Each
Johnson/Evinrude 40-75hp
Item#:
310
Cross Reference#:
21133
320310
Manufacturer Item:
320310
Manufacturer:
GLM
Available:
In Stock
Your Price:
3.38
Each
|◀ ◀ 1489 - 1500 of 2557 ▶ ▶|
View: