Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1513 - 1524 of 2557 ▶ ▶|
View:
Johnson/Evinrude 115-140hp V4 Crossflow
Item#:
1506
Cross Reference#:
18-4301
386110
386574
388048
39360
777473
802096
9-64117
Manufacturer Item:
388602
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
137.05
Each
Johnson/Evinrude 40-50hp 1996 & Up
Item#:
2214S
Cross Reference#:
0397627
0777495
397627
777495
Manufacturer Item:
397627
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
456.88
Each
J/E Looper Torque Spec 57 Ft Lb
Item#:
RB2000
Cross Reference#:
0346044
0769322
346044
Manufacturer Item:
346044
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
14.99
Each
Johnson/Evinrude 55-75hp 3cyl
Item#:
1489
Cross Reference#:
0314322
0777967
18-0935
314322
34740
777967
878707
Manufacturer Item:
314322
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
4.46
Each
Johnson/Evinrude 85-135hp V4 Crossflow 1973-1977
Item#:
1490
Cross Reference#:
18-0957
318373
34880
777947
878716
Manufacturer Item:
318373
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
14.96
Each
Johnson/Evinrude 9.9/15
Item#:
386008
Cross Reference#:
0386008
386008
Manufacturer Item:
386008
Manufacturer:
OMC / Bombardier
Available:
Out of Stock
ETA:
11/25/2026
Your Price:
49.73
Each
Johnson/Evinrude 25/35hp 2 Cyl
Item#:
2954
Cross Reference#:
18-2954
319633
35840
802273
Manufacturer Item:
319633
Manufacturer:
Sierra
Available:
In Stock
Your Price:
38.79
Each
Johnson/Evinrude V6 Looper
Item#:
1636
Cross Reference#:
0331214
0333879
0777409
18-0965
331214
333879
35780
777409
878720
9-60414
Manufacturer Item:
333879
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.65
Each
Evinrude 200-300hp E-tec Johnson/Evinrude 200-225 FFI
Item#:
1639
Cross Reference#:
0347205
0351535
0778302
18-0690
347205
351535
778302
Manufacturer Item:
351535
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
18.85
Each
Johnson/Evinrude V8 Looper
Item#:
1632
Cross Reference#:
18-0150
329975
35460
878641
Manufacturer Item:
329975
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
22.29
Each
Johnson/Evinrude 120-140hp V4 Looper
Item#:
1631
Cross Reference#:
0328590
0777932
18-0138
18-0138
328590
35370
777932
878636
9-60423
Manufacturer Item:
328590
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.97
Each
Johnson/Evinrude V4
Item#:
2911
Cross Reference#:
0336574
0778451
22653
336574
778451
Manufacturer Item:
336574
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
236.96
Each
|◀ ◀ 1513 - 1524 of 2557 ▶ ▶|
View: