Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1801 - 1812 of 2557 ▶ ▶|
View:
Johnson/Evinrude 85-300hp OMC Stringer/Cobra 9/16" Thick
Item#:
1286
Cross Reference#:
0126402
0126870
0321173
0333592
0777996
126402
126870
18-4223
22220
321173
333592
3852020
777996
802187
Manufacturer Item:
333592
Manufacturer:
GLM
Available:
In Stock
Your Price:
41.26
Each
Johnson/Evinrude 40-175hp OMC Stringer/Cobra All Models
Item#:
2752
Cross Reference#:
0382407
0777577
18-1351
22870
382407
445-152
445-152
777577
878756
Manufacturer Item:
382407
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
20.09
Each
J/E 85-140hp Merc 75-115hp EFI OMC Cobra w/1.125" Prop Shaft
Item#:
2753
Cross Reference#:
0383247
0384195
0777586
18-1357
22880
383247
384195
447-242
777586
878761
878773
879194031
Manufacturer Item:
384195
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.65
Each
Johnson/Evinrude OMC Stringer/Cobra w/1 1/4"
Item#:
2939
Cross Reference#:
0320569
0398042
0778165
18-3708-1
22185
3850984
5008966
778165
802126
802126Q1
Manufacturer Item:
398402
Manufacturer:
GLM
Available:
In Stock
Your Price:
9.86
Each
Johnson/Evinrude 90-300hp OMC String/Cobra w/ 3/4x16 Nut
Item#:
2939-1
Cross Reference#:
0175266
0320569
0398042
0777995
0778165
175266
18-3715
22200
320569
3850984
398042
5008966
777995
778165
802009
802126
802126Q1
Manufacturer Item:
175266
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
28.49
Each
Johnson/Evinrude 90-300hp OMC Stringer/Cobra
Item#:
2939-2
Cross Reference#:
22225
Manufacturer Item:
434153
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
61.69
Each
Johnson/Evinrude 85-300hp OMC Stringer/Cobra
Item#:
0574
Cross Reference#:
0320570
0332118
0777993
18-4231
22190
320570
332118
3852163
777993
802044
9-73905
Manufacturer Item:
320570
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
19.29
Each
Johnson / Evinrude Adapts C2 cables to J/E
Item#:
K57
Cross Reference#:
CA27320P
64-892790A02
702755015680
892790A02
Manufacturer:
Uflex
Available:
In Stock
Your Price:
28.56
Each
Johnson/Evinrude 40-140hp OMCString/Cobraw/ Large Case
Item#:
3716P
Cross Reference#:
0175267
0777994
175267
175267
18-3716
22340
777994
802002
802002Q1
9-73952
Manufacturer Item:
175267
Manufacturer:
GLM
Available:
In Stock
Your Price:
13.50
Each
Johnson/Evinrude 85-140 78-98 String/Cobra4cylw/1.1251978-87
Item#:
3466
Cross Reference#:
0314996
0323466
0778170
314996
323466
445-126
778170
Manufacturer Item:
323466
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
13.47
Each
Johnson/Evinrude 100-300hp OMC Stringer/Cobra w/ 13/16"
Item#:
2126
Cross Reference#:
F523058
0387247
0769830
11410
18-1158
30956
30956T
387247
769830
Manufacturer Item:
387247
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
15.44
Each
Johnson Evinrude Force 50hp
Item#:
DV372
Cross Reference#:
0385949
0585267
0586100
0777705
0777710
18-5656
385949
586100
777705
777710
Manufacturer Item:
385949
Manufacturer:
Arco
Available:
In Stock
Your Price:
31.16
Each
|◀ ◀ 1801 - 1812 of 2557 ▶ ▶|
View: