Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1993 - 2004 of 2557 ▶ ▶|
View:
Red & Black w/ White Jacket
Item#:
16-2
Manufacturer:
Pacer Wire & Connectors
Available:
In Stock
Your Price:
0.77
Each
Universal - Single Cable
Item#:
PMROT
Manufacturer:
Pro Marine
 
Heavy
Your Price:
150.0000
Each
Uflex High Efficiency Helm Onl
Item#:
G89
Manufacturer:
Uflex
Available:
In Stock
Your Price:
128.99
Each
Uflex High Efficiency
Item#:
G87
Manufacturer:
Uflex
Available:
In Stock
Your Price:
128.99
Each
Uflex & Teleflex SSC124
Item#:
M86X
Manufacturer:
Uflex
 
Heavy
Your Price:
320.0000
Each
Uflex High Efficiency
Item#:
G89T
Manufacturer:
Uflex
Available:
Out of Stock
Your Price:
128.99
Each
Item#:
M90X
Manufacturer:
Uflex
 
Heavy
Your Price:
175.0000
Each
Yamaha All V8 & 4.2L V6
Item#:
ACC-GLUBE-HD-QT
Cross Reference#:
ACC-GLUBE-HD-QT
Manufacturer Item:
ACC-GLUBE-HD-QT
Manufacturer:
Yamaha Outboard
Available:
In Stock
14.9500
Your Price:
14.27
Each
Yamaha 20-50HP L-1-1/4" Dia-1/16"
Item#:
30030
Cross Reference#:
F1027
0314502
0777988
18-2380
22070
22146
314502
777988
8M0214988
802028
82131M
82131M
82132M
82800M
89961
9-73911
91401-30028-00
91401-30030-00
91402-30022-00
91402-30022-09
91402-30028-00
91402-30028-09
91402-30030-00
91490-30022-00
91490-30025-00
91490-30030-00
Manufacturer Item:
91490-30030-00
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
3.05
Bag
with and without bulk head fitting
Item#:
UFLEXHHOSE
Manufacturer:
Uflex
 
Heavy
Your Price:
200.0000
Each
Flexible Hydraulic Steering Hose Kits from 1FT to 30FT+

Flexible Hydraulic Steering Hose Kit

Pro Marine PROHHOSE Hydraulic Steering Hose Kit

The Pro Marine PROHHOSE Hydraulic Steering Hose Kit is designed for marine hydraulic steering applications and is available in hose lengths from 1 foot to 30+ feet.

These flexible hydraulic steering hoses are compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar front-mount hydraulic steering setups.

What Hydraulic Steering Hoses Do

Hydraulic steering hoses transfer steering fluid between the helm pump and steering cylinder. As the steering wheel is turned, hydraulic pressure moves through the hoses to operate the steering cylinder and turn the outboard engine.

Proper hose length and routing are critical for smooth steering operation, engine movement, jack plate travel, and safe hydraulic steering performance.

Pro Tip: Always measure the complete hose routing path before ordering. Include steering travel, jack plate setback, rigging bends, and engine movement when determining the correct hose length.

Read our Hydraulic Steering Comparison & Pro Tips Guide

Available Hose Configurations

Option Description
Standard Hose Kit Flexible hydraulic steering hose kit without bend restrictor or bulkhead fitting
Bulkhead Option Includes bend restrictor and bulkhead fitting configuration for tighter rigging applications
Length Options Available from 1FT to 30FT+ lengths
System Compatibility Compatible with many standard hydraulic steering systems

Best Applications

Application Recommended Use
Single Outboards Hydraulic steering hose routing for standard installations
Jack Plate Boats Allows proper hose routing with setback and engine movement
Center Consoles Longer hose routing for offshore and coastal applications
Performance Boats Flexible hydraulic hose routing for high-performance setups
Repower Projects Replacement hydraulic steering hose installations

Complete or Service Your Steering System

350-HSTEER Steering System

Pair these hoses with the Pro Marine 350-HSTEER hydraulic steering system.

View 350-HSTEER Steering System

700HSTEER Steering System

Compatible with Pro Marine Pro Series hydraulic steering systems and performance steering setups.

View 700HSTEER Steering System

Hydraulic Fluid

Use quality hydraulic steering fluid during installation, filling, and bleeding procedures.

View PRO-OIL15 Hydraulic Fluid

Fill & Bleed Accessories

Simplify steering installation and maintenance with fill hose assemblies and bleed kits.

View 102P Fill Hose Assembly
View 350-BLEEDKIT

Key Features and Benefits

  • Flexible hydraulic steering hose kit design
  • Available in lengths from 1FT to 30FT+
  • Optional bend restrictor and bulkhead fitting configuration
  • Compatible with many hydraulic steering systems
  • Works with Pro Marine, SeaStar®, and Uflex® style systems
  • Designed for marine hydraulic steering applications
  • Useful for jack plates and performance steering setups
  • Helps provide smooth hydraulic steering operation

System Function and Connections

  • System Type: Hydraulic outboard steering
  • Component Type: Flexible hydraulic steering hose kit
  • Part Number: PROHHOSE
  • Available Lengths: 1FT to 30FT+
  • Connection Type: Hydraulic steering hose fittings
  • Optional Features: Bend restrictor and bulkhead fitting configuration
  • Typical Use: Hydraulic steering hose routing between helm and cylinder
  • Compatible Systems: Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering systems
  • Related Components: Helm pumps, steering cylinders, hydraulic fluid, fill hose assemblies, and bleed kits

FAQ

What lengths are available for the PROHHOSE steering hose kit?
Pro Marine hydraulic steering hoses are available in lengths from 1FT to over 30FT depending on the application.

What is the bend restrictor and bulkhead fitting option?
This option includes additional hose support and rigging components commonly used in tighter rigging applications or installations requiring cleaner hose routing.

What steering systems are these hoses compatible with?
These hoses are compatible with many standard hydraulic steering systems including Pro Marine, SeaStar®, Uflex®, and similar hydraulic steering setups.

How do I determine the correct hose length?
Measure the full hose routing path including steering movement, rigging bends, setback, and jack plate travel before ordering.

Can these hoses be used for performance boats?
Yes. These flexible hydraulic steering hoses are commonly used on performance boats, offshore boats, and jack plate applications.

Dealer Discounts & Store Policies

Dealer / Marine Industry Discounts

Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.

Apply for a Dealer Account

Shipping Policy

  • Free shipping on orders over $100 (continental U.S.).
  • Orders ship via UPS, USPS, and FedEx.
  • Orders received before 5:30 PM EST ship the same business day.
  • Typical delivery time is 1–5 business days.

30-Day Return Policy

  • Returns accepted within 30 days of delivery.
  • Items must be new, unused, and in original packaging.
  • Return authorization is required before sending items back.

Need help with a return or order question?
Contact Us
Phone: 941-721-3000


Searchable Terms

PROHHOSE, hydraulic steering hose kit, Pro Marine steering hose, flexible hydraulic hose, steering hose kit, bend restrictor hose, bulkhead fitting steering hose, SeaStar hose, Uflex hose, hydraulic steering hoses

Item#:
PROHHOSE
Manufacturer:
Pro Marine
Your Price:
79.9900
Each
Item#:
PMROT2
Manufacturer:
Pro Marine
 
Heavy
Your Price:
370.0000
Each
|◀ ◀ 1993 - 2004 of 2557 ▶ ▶|
View: