Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1537 - 1548 of 2557 ▶ ▶|
View:
Johnson/Evinrude 50hp 2cyl 1971-1975
Item#:
18-2958
Cross Reference#:
315539
802261
Manufacturer Item:
315539
Manufacturer:
Sierra
Available:
In Stock
Your Price:
41.79
Each
Johnson/Evinrude 50hp 2cyl 1968-1970
Item#:
18-2951
Cross Reference#:
802216
Manufacturer Item:
304720
Manufacturer:
Johnson/Evinrude
Available:
Special Order
Your Price:
22.99
Each
Johnson/Evinrude 4-20hp
Item#:
312633
Cross Reference#:
0312633
312633
Manufacturer Item:
312633
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
13.25
Each
Johnson/Evinrude 40-70hp 2 & 3 cyls
Item#:
31-3339
Cross Reference#:
0313339
313339
Manufacturer Item:
313339
Manufacturer:
GLM
Available:
In Stock
Your Price:
4.00
Each
J/E 40-235hp 2-6Cyl xflow Torque Spec 30 Ft Lb
Item#:
RB5000
Cross Reference#:
0307409
0307760
0308186
0777787
18-4075
307409
307760
308186
777787
878911
878911A1
Manufacturer Item:
308186
Manufacturer:
Pro Marine
Available:
In Stock
2.6900
Your Price:
2.60
Each
Johnson/Evinrude 50-70hp 3cyl 1986 to 1995
Item#:
2205
Cross Reference#:
0329828
0777416
18-1205
329828
35430
777416
878739
9-60425
Manufacturer Item:
329828
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
5.10
Each
Johnson/Evinrude 50-55hp
Item#:
2194
Cross Reference#:
0384959
0385385
0388525
0390076
0391322
0392669
0393433
0437806
0439083
0777423
18-4318
439083
777423
9-64113
Manufacturer Item:
390076
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
81.35
Each
Johnson/Evinrude 120-140hp V4 Big Bore Looper
Item#:
2197
Cross Reference#:
0333549
0340115
0777430
18-3866
18-3866
333549
333549
340115
35930
777430
878882
879513
9-63826
Manufacturer Item:
340115
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
29.69
Each
V4 V6 OMC Magnum Case
Item#:
2217
Cross Reference#:
5001582
5004991
5004991
5004991
5004991
5004991
Manufacturer Item:
5001582
Manufacturer:
Engineered Marine Parts
Available:
In Stock
Your Price:
666.64
Each
Johnson/Evinrude 85-125 V4 Crossflow
Item#:
909
Cross Reference#:
0307133
0777386
18-2876
307133
33280
777386
802228
9-60426
Manufacturer Item:
307133
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
1.44
Each
Johnson/Evinrude 40-75 HP Complete with Seal
Item#:
900
Cross Reference#:
18-1372
22920
383955
390900
878776
Manufacturer Item:
390900
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
09/16/2026
Your Price:
88.96
Each
Johnson/Evinrude 185-225hp V6 Big Bore Looper
Item#:
919
Cross Reference#:
0340919
0345257
0778206
18-0492
18-0492
340919
340919
340919
340919
345257
36320
778206
879005
879005A1
Manufacturer Item:
345257
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
35.12
Each
|◀ ◀ 1537 - 1548 of 2557 ▶ ▶|
View: