Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1549 - 1560 of 2557 ▶ ▶|
View:
Johnson/Evinrude 2 cyl 25-35hp 1975 & Below
Item#:
932
Cross Reference#:
0319710
0777456
18-2878
18-2878
319710
34350
777456
802275
Manufacturer Item:
319710
Manufacturer:
Sierra
Available:
Out of Stock
Your Price:
10.00
Each
This item is discontinued
Johnson/Evinrude 25-35hp
Item#:
940
Cross Reference#:
0324332
0330621
0777412
18-2852
324332
330621
33710
777412
802300
Manufacturer Item:
330621
Manufacturer:
Sierra
Available:
In Stock
Your Price:
25.09
Each
Johnson/Evinrude 55-75hp 3 cyl 3.00" Bore
Item#:
958
Cross Reference#:
0313413
0324482
0777401
18-2960
313413
324482
33400
777401
802249
878846
9-63827
Manufacturer Item:
313413
Manufacturer:
GLM
Available:
In Stock
Your Price:
35.08
Each
Johnson/Evinrude 150-235hp V6 Crossflow
Item#:
967
Cross Reference#:
0320745
0335360
0766779
0777392
18-2964
18-2964
320745
335360
33870
33870
766779
777392
802313
878875
878875
9-63829
9-63829
Manufacturer Item:
335360
Manufacturer:
Pro Marine
Available:
Out of Stock
ETA:
03/08/2027
Your Price:
21.63
Each
Johnson/Evinrude 88-140hp V4 Crossflow
Item#:
966
Cross Reference#:
0318358
0777379
18-2956
318358
33540
777379
802266
878877
9-63828
Manufacturer Item:
318358
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
14.16
EACH
Johnson/Evinrude 85-235hp V4 V6 Crossflow
Item#:
972
Cross Reference#:
0322858
0777415
18-2547
322858
34450
777415
802056
Manufacturer Item:
322858
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
0.88
Each
Johnson/Evinrude 4hp 2cyl
Item#:
998
Cross Reference#:
0326953
0332010
0777443
18-2888
326953
332010
33860
777443
802307
9-63823
Manufacturer Item:
332010
Manufacturer:
Sierra
Available:
In Stock
Your Price:
37.29
Each
Johnson/Evinrude 9.9-15hp
Item#:
997
Cross Reference#:
0318988
0322161
0325721
0777384
18-2907
318988
322161
325721
33080
777384
802289
Manufacturer Item:
325721
Manufacturer:
Sierra
Available:
In Stock
Your Price:
5.90
Each
Johnson/Evinrude 185-225hp V6 Big Bore Looper
Item#:
919-1
Cross Reference#:
0340919
0345257
0778206
18-0492
340919
345257
36320
778206
879005
879005A1
Manufacturer Item:
345257
Manufacturer:
OMC / Bombardier
Available:
In Stock
Your Price:
75.70
Each
Johnson Evinrude 120-140hp SB V4 Small Bore Looper
Item#:
4310
Cross Reference#:
0396750
18-4310
39354
777479
802124
9-64110
Manufacturer Item:
396750
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
109.91
Each
Johnson/Evinrude Small Bore V8
Item#:
4311
Cross Reference#:
0396677
0398355
18-4311
396677
802129
Manufacturer Item:
398355
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
167.12
Each
Johnson/Evinrude Big Bore V8
Item#:
4320
Cross Reference#:
18-4320
39070
Manufacturer Item:
398693
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
172.33
Each
|◀ ◀ 1549 - 1560 of 2557 ▶ ▶|
View: