Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22

Johnson, Evinrude & E-TEC Outboard Parts

Shop OEM and aftermarket Johnson, Evinrude, and E-TEC outboard parts for maintenance, repair, troubleshooting, and complete engine rebuild projects. Browse marine parts by system, including cooling, fuel delivery, electrical, internal engine components, lower unit parts, steering, trim, and routine service items.

Pro Marine USA carries parts for a wide range of Johnson and Evinrude outboards, including carbureted, Ficht / FFI, and E-TEC direct-injection platforms. Use your engine horsepower, model number, serial number, or OEM part number whenever possible to confirm fitment before ordering.

Shop Johnson, Evinrude & E-TEC Parts by System

Find the Correct Johnson, Evinrude or E-TEC Part

Johnson and Evinrude parts can vary by horsepower, model number, engine family, and production range. If you are unsure which component fits your engine, use the OEM parts lookup to identify the original part number from a factory parts diagram.

Once you have the OEM part number, search Pro Marine to find available OEM and aftermarket replacement options.

Use Our OEM Parts Lookup »

Common Johnson, Evinrude & E-TEC Engine Families

Pro Marine supports many Johnson and Evinrude outboards across a wide horsepower range, including older carbureted engines and later direct-injection platforms.

  • Small Outboards: 2HP through 30HP 2-stroke and select 4-stroke applications
  • Midrange: common 35HP through 90HP carbureted and fuel-injected platforms
  • V4 and V6: popular 115HP, 135HP, 140HP, 150HP, and 175HP applications
  • High Horsepower: 200HP, 225HP, 250HP, and 300HP applications
  • Ficht / FFI: direct-injection Johnson and Evinrude engine families
  • E-TEC: Evinrude E-TEC direct-injection platforms across multiple horsepower ranges

Common Johnson & Evinrude Repair Areas

  • Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
  • Hard starting or rough running: inspect fuel pumps, carburetors or injectors, filters, spark plugs, ignition components, and intake sealing.
  • No spark or intermittent ignition: inspect power packs, ignition coils, stators, timer bases, sensors, wiring, and grounds.
  • Low compression or power loss: inspect pistons, rings, cylinders, reeds, bearings, gaskets, and other internal engine components.
  • Lower unit noise or water intrusion: inspect prop shaft seals, driveshaft seals, shift shaft seals, bearings, gears, and gear lube condition.
  • Trim or steering problems: inspect trim motors, hydraulic components, steering systems, hoses, seals, and related rigging parts.

Why Buy Johnson, Evinrude & E-TEC Parts from Pro Marine USA?

  • OEM and aftermarket replacement options for many Johnson, Evinrude, and E-TEC applications.
  • Parts for routine maintenance, professional repair, engine rebuilding, lower units, fuel systems, electrical systems, steering, and trim.
  • OEM diagram and part-number lookup tools to help identify the correct component before ordering.
  • Dealer pricing available for qualified marine repair businesses and dealers.
  • Large selection of older OMC-era parts and modern E-TEC service components.
  • Fast weekday shipping on qualifying in-stock orders.

Frequently Asked Questions

How do I find the correct Johnson or Evinrude outboard part?

Start with the engine horsepower, model number, production year, and serial information whenever available. Use the OEM parts lookup to identify the original part number from the factory diagram.

Can I search Johnson and Evinrude parts by OEM part number?

Yes. Enter the OEM part number into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.

Do Johnson and Evinrude parts vary by model and year?

Yes. Components may vary across engines with similar horsepower depending on model number, engine family, and production range. Confirm complete engine identification information before ordering.

Do you carry parts for Evinrude E-TEC engines?

Yes. Pro Marine carries parts for many Evinrude E-TEC applications, including cooling, fuel, electrical, internal engine, lower unit, steering, trim, and maintenance components.

Do you carry parts for older Johnson and Evinrude outboards?

Yes. Pro Marine carries many repair and rebuild parts for older Johnson, Evinrude, and OMC outboards, including carbureted and early fuel-injected engine families.

What Johnson and Evinrude parts are commonly replaced during routine maintenance?

Common maintenance items include spark plugs, fuel filters, water pump kits, impellers, thermostats, gear lube, drain plug seals, anodes, oil-system components, and model-specific service items.

Fitment Tip: Johnson, Evinrude, and E-TEC parts can vary by model number, horsepower, engine family, and production range. Confirm the OEM part number or complete engine identification information whenever possible before ordering.

|◀ ◀ 1561 - 1572 of 2557 ▶ ▶|
View:
Johnson/Evinrude 3cyl 1986 & Up
Item#:
4321
Cross Reference#:
0397974
0398047
0438904
0777421
18-4321
39390
438904
777421
9-64101
Manufacturer Item:
398047
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
50.49
Each
Johnson/Evinrude 40hp 2cyl
Item#:
4324
Cross Reference#:
0390700
18-4324
390700
39355
Manufacturer Item:
390700
Manufacturer:
GLM
Available:
In Stock
Your Price:
49.49
Each
Johnson/Evinrude 120-140hp BB V4 Looper
Item#:
4322
Cross Reference#:
0432570
0777466
18-4322
39400
432570
777466
9-64109
Manufacturer Item:
432570
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
122.43
Each
Johnson/Evinrude 185-225hp V6 Big Bore Looper
Item#:
4323
Cross Reference#:
0432571
0432687
0436891
0777469
18-4323
39410
436891
777469
9-64108
Manufacturer Item:
436891
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
131.52
Each
Johnson/Evinrude 200-225hp V6 Small Bore Looper
Item#:
4308
Cross Reference#:
0398172
18-4308
39930
802127
Manufacturer Item:
398172
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
125.95
Each
Johnson/Evinrude 175-235hp Big Bore Crossflow
Item#:
4309
Cross Reference#:
18-4309
391989
39430
394885
777476
802134
879008
9-64115
Manufacturer Item:
434381
Manufacturer:
Pro Marine
Available:
In Stock
130.0000
Your Price:
115.00
Each
Johnson/Evinrude 9.9-15hp 1992 & Below
Item#:
4306
Cross Reference#:
0386699
0387855
0388193
0391507
0394546
0777457
39380
394546
777457
Manufacturer Item:
394546
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
34.72
Each
Johnson/Evinrude 25/35hp 2cyl
Item#:
4307
Cross Reference#:
0389206
0391196
0392567
0392615
0433941
0777454
18-4307
39420
433941
777454
9-64114
Manufacturer Item:
433941
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
56.12
Each
Johnson/Evinrude 40-50hp 2cyl 1981-1999
Item#:
4305
Cross Reference#:
0384959
0385385
0388525
0390076
0391322
0392669
0393433
0437806
0439083
0777423
18-4305
439083
777423
9-64113
Manufacturer Item:
392609
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
62.98
Each
Johnson / Evinrude V4 60 Deg 1992 & Up
Item#:
60PH
Cross Reference#:
0436180
0436945
0438114
0438115
0438921
0438922
Manufacturer Item:
0438922
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
0.00
Each
Contact us to order
Johnson/Evinrude 60° V6 1994 & UP Carb
Item#:
4371
Cross Reference#:
39352
9-64107
Manufacturer Item:
437155
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
163.66
Each
Johnson/Evinrude 60º V4 Carb
Item#:
4372
Cross Reference#:
39351
439559
9-64100
Manufacturer Item:
437779
Manufacturer:
Pro Marine
Available:
In Stock
Your Price:
105.01
Each
|◀ ◀ 1561 - 1572 of 2557 ▶ ▶|
View: