Lanyards | Johnson Evinrude Outboard

Compatible Applications

Pro Marine 2888 fits a broad range of Johnson and Evinrude outboard and remote-control applications using the corresponding engine cut-off switch design.

The supplied catalog fitment includes hundreds of individual Johnson and Evinrude model-number applications, along with remote-control, electrical, rigging and accessory listings.

Horsepower Applications Found in Supplied Fitment

The supplied model list includes Johnson and Evinrude applications in the following horsepower families:

10 HP, 15 HP, 20 HP, 25 HP, 28 HP, 30 HP, 35 HP, 40 HP, 45 HP, 48 HP, 50 HP, 55 HP, 60 HP, 65 HP, 70 HP, 75 HP, 88 HP, 90 HP, 100 HP, 110 HP, 115 HP, 120 HP, 125 HP, 140 HP, 150 HP, 155 HP, 175 HP, 185 HP, 200 HP, 225 HP, 235 HP, 275 HP and 300 HP

OEM and Cross Reference Numbers

This style of Johnson/Evinrude tether has appeared under several OEM and aftermarket part numbers. These numbers are useful when searching older parts diagrams or identifying the correct replacement for an existing safety lanyard.

What This Part is Used For

The safety tether is part of the boat's engine cut-off switch system. The clip end attaches to the compatible Johnson/Evinrude cut-off switch while the tether is attached to the operator.

If the operator moves far enough away from the helm, the tether pulls the clip from the engine cut-off switch. The switch can then interrupt engine operation.

A missing, damaged or incorrect tether can prevent the engine cut-off system from being used as intended, making the safety lanyard an important item to keep in good condition and available whenever the boat is operated.

Older Johnson and Evinrude Cap and Lanyard Numbers

Older Johnson and Evinrude parts diagrams may identify this component as a Cap and Lanyard rather than simply a tether or safety lanyard.

Common older numbers include 392288 / 0392288 and 393079 / 0393079. Parts references show these older cap-and-lanyard applications crossing to the later 432230 / 0432230 lanyard and clip assembly.

Pro Marine 2888 provides an aftermarket replacement option for these compatible Johnson and Evinrude engine cut-off switch applications.

Why an Engine Cut-Off Tether is Important

The engine cut-off tether is designed to connect the operator to the engine's safety switch while the boat is underway.

When properly connected to a compatible switch, the tether allows the engine cut-off system to respond if the operator is unexpectedly moved away from the control position.

Because the tether is frequently exposed to sunlight, heat, moisture and repeated stretching, it should be inspected periodically and replaced when damaged or deteriorated.

When Should a Safety Tether Be Replaced?

Inspect the tether periodically, particularly on older boats and remote controls.

Replacement should be considered if you notice:

• A missing tether or safety clip
• A cracked, damaged or distorted switch clip
• A tether that no longer stays securely attached
• Damage caused by prolonged sun or weather exposure
• A cut, stretched or badly worn tether
• A weakened or damaged attachment point
• An incorrect tether that does not properly engage the cut-off switch

Replacement and Safety Tips

• Compare the replacement tether with the original before use.
• Make sure the clip fully engages the engine cut-off switch.
• Verify the engine starts and operates normally with the tether installed.
• Verify the engine cut-off system operates according to the manufacturer's procedure.
• Inspect the tether regularly for cracking, stretching or weather damage.
• Do not modify the tether or safety-switch clip.
• Replace an incorrect or poorly fitting tether rather than forcing it onto the switch.

Key Features and Benefits

• Pro Marine Brand aftermarket safety tether
• Pro Marine item number 2888
• Designed for compatible Johnson and Evinrude engine cut-off switches
• Fits numerous Johnson and Evinrude outboard applications
• Supplied fitment includes models from 10 HP through 300 HP
• Fits applicable Johnson/Evinrude remote-control systems
• Replaces older 392288 and 393079 cap-and-lanyard applications
• Crosses to 432230 / 0432230
• Crosses to 765556 / 0765556
• Crosses to aftermarket reference MP28880

FAQ

What does Pro Marine 2888 fit?
The supplied fitment includes a large range of Johnson and Evinrude outboards, remote controls and engine cut-off switch applications, including engine models from approximately 10 HP through 300 HP. Verify fitment using the original tether or OEM part number.

Does Pro Marine 2888 replace Johnson/Evinrude 432230?
Yes. Pro Marine 2888 is an aftermarket replacement for applications using 432230 / 0432230.

Does 432230 replace 392288?
Parts references show older 392288 / 0392288 cap-and-lanyard applications crossing to the later 432230 / 0432230 lanyard and clip assembly.

Does 432230 replace 393079?
Yes. Older 393079 / 0393079 cap-and-lanyard applications are also associated with the later 432230-style lanyard and clip assembly.

What is MP28880?
MP28880 is an aftermarket cross-reference associated with this Johnson/Evinrude safety-tether application.

Is this an ignition kill-switch lanyard?
Yes. This tether is used with the compatible Johnson/Evinrude engine cut-off / safety switch.

Will this fit every Johnson and Evinrude outboard?
No. Johnson and Evinrude used different controls and cut-off switch configurations. Verify that your application crosses to one of the listed OEM numbers before ordering.

Why do some Johnson and Evinrude diagrams call this a cap and lanyard?
Older parts diagrams commonly describe this style of safety-switch component as a Cap and Lanyard. Later listings may use terms such as lanyard and clip assembly, tether, safety tether or engine cut-off lanyard.

Is 2888 a Pro Marine Brand part?
Yes. This listing is for the Pro Marine Brand aftermarket replacement tether.

Searchable Part Numbers

2888, MP28880, 0392288, 392288, 0393079, 393079, 0432230, 432230, 0765556, 765556

Searchable Terms

Pro Marine 2888, Johnson tether, Evinrude tether, Johnson Evinrude tether, Johnson kill switch lanyard, Evinrude kill switch lanyard, Johnson safety tether, Evinrude safety tether, OMC tether, OMC safety lanyard, Johnson engine cut off lanyard, Evinrude engine cut off lanyard, Johnson remote control tether, Evinrude remote control tether, Johnson cap and lanyard, Evinrude cap and lanyard, 432230 lanyard, 393079 lanyard, 392288 lanyard