S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Trim System
Genuine BRP OEM Trim Cap & Seal Kit - 8985
Factory original Trim Cap & Seal Kit for BRP E-Tec Inline 3 and V4 outboards.
Replaces 0769114 and 5008985. Ideal for restoring hydraulic trim performance and stopping leaks.
Compatible Applications
BRP E-Tec Inline 3 & V4 outboards. Verify exact fitment with your engine serial number.
Common E-Tec Trim Pump Issues
- Fluid leaks around the trim cap area
- Trim drifts down after raising
- Slow or weak trim operation
- Noisy trim pump due to low fluid
This OEM kit is the factory recommended repair for these common problems.
Installation Guide
Tools Needed: Socket set, torque wrench, scraper, rags.
- Support outboard and relieve system pressure.
- Remove old cap, clean surfaces thoroughly.
- Install new seals and cap. Torque to spec.
- Refill fluid and test trim operation.
Consult the BRP service manual for your specific model.
Important Fitment Note
Always confirm compatibility using your engine serial number and existing part number before ordering.
OEM & Cross Reference Numbers
| OEM (BRP / OMC) | 8985, 0769114, 5008985 |
Aftermarket Alternative
EMP Trim Cap & Seal Kit - 8985P
High-quality EMP aftermarket version of this kit.
View EMP Version →What This Part Is Used For
This genuine OEM kit replaces the trim cap and seals on the hydraulic trim pump.
Essential for stopping leaks and maintaining reliable trim performance.
Key Features and Benefits
- Genuine BRP OEM quality
- Exact factory fit and performance
- Stops hydraulic fluid leaks
- Restores smooth trim operation
FAQ
What engines does this fit?
BRP E-Tec Inline 3 and V4 outboards.
Should I choose OEM or EMP?
OEM for factory exact match. EMP for a reliable, lower-cost alternative.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
BRP OEM trim cap kit, 8985, E-Tec trim seals, 0769114, 5008985, genuine E-Tec cap and seal
Searchable Part Numbers
8985, 0769114, 5008985
5008985
0768744
435345
0387585
173594
387585
320788
0337934
0433815
0435566
0769189
335150
337934
433815
435566
0765614
335479
765614
Power Trim & Tilt Cap with Seals
Replacement Tilt Cap Assembly for Select Yamaha, Suzuki & OMC Showa Trim Systems
This replacement tilt cap with seals assembly fits select Yamaha, Suzuki, Johnson, and Evinrude outboards using compatible Showa power trim and tilt systems.
The tilt cap assembly helps seal the hydraulic trim cylinder while supporting proper trim piston movement, hydraulic pressure retention, and reliable trim and tilt operation.
Compatible Applications
| Brand | Model Range | Years | System |
|---|---|---|---|
| Yamaha | 115HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 115HP FourStroke | 2000-2007 | Showa Power Trim & Tilt |
| Yamaha | 130HP | 1997-2004 | Showa Power Trim & Tilt |
| Yamaha | 150HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 150HP FourStroke | 2004-2007 | Showa Power Trim & Tilt |
| Yamaha | 175HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 200HP | 1997-2005 | Showa Power Trim & Tilt |
| Yamaha | 225HP | 1997-2007 | Showa Power Trim & Tilt |
| Yamaha | 250HP | 2003-2007 | Showa Power Trim & Tilt |
| Yamaha | 300HP | 2004-2007 | Showa Power Trim & Tilt |
| Suzuki | DF115 | 2015-2024 | Showa Power Trim & Tilt |
| Suzuki | DF140 | 2002-2021 | Showa Power Trim & Tilt |
| Suzuki | DF150 | 2006-2023 | Showa Power Trim & Tilt |
| Suzuki | DF175 | 2006-2023 | Showa Power Trim & Tilt |
| Suzuki | DF200 | 2015-2024 | Showa Power Trim & Tilt |
| Johnson / Evinrude | 70-235HP | 1978-1983 | Showa Power Trim & Tilt |
| Johnson / Evinrude | 140HP FourStroke | 2003-2006 | Showa Power Trim & Tilt |
Because manufacturers used multiple trim system variations depending on model and production range, always verify your engine model, serial number, and trim cylinder diagram before ordering.
OEM Part Numbers & Cross References
| Brand | OEM Part Number |
|---|---|
| Yamaha | 63P-43810-00-00 |
| Yamaha | 63P-43810-09-00 |
| Yamaha | 64E-43810-00-00 |
| Yamaha | 64E-43810-09-00 |
| Yamaha | 64E-43811-01-00 |
| Yamaha | 64E-43811-02-00 |
| Suzuki | 48401-92J00 |
| Suzuki | 48401-92J01 |
| Suzuki | 48401-96J00 |
| Suzuki | 48401-96J01 |
| Suzuki | 48401-96J02 |
| Johnson / Evinrude | 5033932 |
| Johnson / Evinrude | 390006 |
| Johnson / Evinrude | 768745 |
What This Tilt Cap Assembly is Used For
This trim cap assembly is used in compatible hydraulic power trim and tilt systems to support the trim piston and help maintain proper hydraulic sealing.
The cap and seal assembly helps retain hydraulic pressure while allowing smooth piston movement during trim and tilt operation.
Worn or damaged trim caps and seals may cause hydraulic leaks, weak trim performance, erratic movement, or difficulty holding trim position.
Replacing worn hydraulic trim seals and cap components can help restore proper trim operation and reduce hydraulic fluid leakage.
Key Features and Benefits
- Replacement tilt cap assembly with seals
- Fits select Yamaha, Suzuki, Johnson, and Evinrude outboards
- Compatible with Showa hydraulic trim systems
- Helps maintain hydraulic trim pressure
- Supports proper trim piston operation
- Helps reduce hydraulic fluid leakage
- Common repair item during trim cylinder service
- Sold individually
Trim Cap Assembly Details
- Part Type: Tilt Cap with Seals
- Application: Hydraulic Power Trim & Tilt Systems
- System Type: Showa Hydraulic Trim System
- Fits Brands: Yamaha, Suzuki, Johnson, Evinrude
- Use: Trim cylinder sealing and piston support
- Quantity Sold: Each
FAQ
What does this trim cap fit?
This trim cap assembly fits select Yamaha, Suzuki, Johnson, and Evinrude outboards using compatible Showa power trim and tilt systems.
Does this include seals?
Yes. This assembly includes the cap and sealing components used in compatible hydraulic trim systems.
Can a bad trim cap cause hydraulic leaks?
Yes. Damaged cap seals can allow hydraulic fluid leakage and may affect trim and tilt performance.
Should I verify my trim assembly before ordering?
Yes. Manufacturers used several trim system variations depending on model and serial range, so diagram verification is recommended.
Is this used on Showa trim systems?
Yes. This part is designed for compatible Showa-style hydraulic trim and tilt assemblies used across multiple marine brands.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic trim components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
63P438, tilt cap with seals, Yamaha trim cap, Suzuki trim cap, Johnson trim cap, Evinrude trim cap, Showa trim cap, hydraulic trim cap, power trim seal cap, Yamaha 63P-43810-00-00, Yamaha 64E-43810-00-00, Suzuki 48401-96J02, Suzuki 48401-92J01, Johnson 5033932, Evinrude 390006, OMC 768745, hydraulic trim seal assembly, trim cylinder cap assembly
48401-92J00
48401-92J00
48401-92J01
48401-96J00
48401-96J01
48401-96J02
5033932
63P-43810-00-00
63P-43810-09-00
64E-43810-00-00
64E-43810-09-00
64E-43811-01-00
64E-43811-02-00
48630-92J00
48630-94900
48630-96J01
48630-96J02
48630-96J03
48630-96J04
5030870
5033935
56115-ZW1-702
64E-43820-00-00
64E-43820-08-00
64E-43820-09-00
64E-43821-00-00
64E-43821-01-00
64E-43821-02-00
64E-43821-03-00
64E-43821-04-00
64E-43821-05-00
64E-43821-08-00
64E-43821-09-00
Trim System
EMP Trim Cap & Seal Kit - 8985P
High-quality EMP aftermarket Trim Cap & Seal Kit for BRP E-Tec Inline 3 and V4 outboards.
Replaces OEM numbers 0769114 and 5008985. Excellent solution for common trim leaks and pressure loss.
Compatible Applications
BRP / E-Tec Inline 3 & V4 outboards. Verify with your engine model and serial number.
Common E-Tec Trim Pump Issues
- Fluid leaks around the trim cap — most common symptom of failed seals
- Trim drifts down after raising — pressure loss due to bad seals
- Pump runs but trim is slow or weak — air entering through worn seals
- Noisy or continuously running pump — low fluid from leaks
Replacing the cap and seals with this kit often resolves these issues.
Installation Guide
Tools Needed: Socket set, torque wrench, gasket scraper, clean rags.
- Let engine cool. Support the outboard and relieve hydraulic pressure.
- Remove the old trim cap and clean the mating surface thoroughly.
- Install new seals and cap. Torque to factory specifications.
- Refill hydraulic fluid and bleed the system if needed.
- Test trim operation and check for leaks.
Refer to your BRP service manual for model-specific details.
Important Fitment Note
Always confirm compatibility using your engine serial number and existing part number before ordering.
OEM & Cross Reference Numbers
| OEM (BRP / OMC) | 0769114, 5008985 |
| EMP Version | 8985P |
OEM Version
What This Part Is Used For
This kit replaces the trim cap and seals on the hydraulic trim system of BRP E-Tec outboards.
Prevents hydraulic fluid leaks and restores smooth trim operation.
Key Features and Benefits
- High-quality EMP aftermarket replacement
- Direct fit for E-Tec Inline 3 & V4 models
- Includes cap and complete seal set
- Restores proper hydraulic trim function
FAQ
What engines does this fit?
BRP E-Tec Inline 3 and V4 outboards. Verify with serial number.
What is the difference between 8985 and 8985P?
8985 is the OEM BRP part. 8985P is the EMP aftermarket version.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new, unused, and in original packaging.
- Installed parts are not returnable.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
EMP trim cap and seal kit, 8985P, E-Tec trim seals, 0769114, 5008985, BRP E-Tec cap kit
Searchable Part Numbers
8985P, 8985, 0769114, 5008985
0766486
0776486
122494
122494
122494
766486
776486
0769188
328227
769188