S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
HZY936120013
HZY936120023
PH200-T078
18-6743
330.351
330-351
36120-ZY9-003
36120-ZY9-013
36120-ZY9-023
OEM Yamaha Fuel Pump Gasket
Yamaha Fuel Pump / Fuel System Gasket
This genuine OEM Yamaha fuel pump gasket is used on select Yamaha F-series and V MAX SHO outboards within compatible fuel pump and fuel system assemblies.
The gasket helps seal the fuel system assembly to help prevent fuel leaks, maintain proper fuel pressure, and support reliable engine operation.
Compatible Applications
| Engine Range | Engine Type | System | Application Notes |
|---|---|---|---|
| Yamaha F115 | FourStroke | Fuel System | Used in compatible fuel pump / VST system assemblies |
| Yamaha F150 | FourStroke | Fuel System | Used in compatible fuel system applications |
| Yamaha F200 | FourStroke | Fuel System | Used in compatible fuel system applications |
| Yamaha F225 | FourStroke | Fuel System | Used in compatible fuel system applications |
| Yamaha F250 | FourStroke | Fuel System | Used in compatible fuel system applications |
| Yamaha F300 | FourStroke | Fuel System | Used in compatible fuel system applications |
| Yamaha F350 | FourStroke | Fuel System | Used in compatible fuel system applications |
| Yamaha VF200 | V MAX SHO | Fuel System | Used in compatible VST and fuel system assemblies |
| Yamaha VF225 | V MAX SHO | Fuel System | Used in compatible VST and fuel system assemblies |
| Yamaha VF250 | V MAX SHO | Fuel System | Used in compatible VST and fuel system assemblies |
Always verify your Yamaha model, serial number, and fuel system diagram before ordering fuel system gaskets and seals.
OEM Part Numbers & Cross References
| Brand | Part Number |
|---|---|
| Yamaha OEM | 6CB-24482-00-00 |
| Alternate Search Format | 6CB244820000 |
Complementary Fuel System Service Item
Depending on your Yamaha model and fuel system configuration, you may also need the Yamaha VST Cover Seal during fuel system or VST service.
What This Fuel Pump Gasket is Used For
This Yamaha gasket is used within compatible fuel pump and fuel system assemblies on select Yamaha outboards.
The gasket helps seal mating surfaces within the fuel delivery system to help maintain proper fuel pressure and reduce the risk of fuel leakage.
A worn or damaged fuel system gasket may contribute to fuel leaks, pressure loss, or poor engine performance.
Replacing fuel system gaskets during maintenance or fuel system service helps maintain reliable outboard operation.
Key Features and Benefits
- Genuine OEM Yamaha fuel pump gasket
- Fits select Yamaha F115-F350 and VF-series outboards
- Used in compatible fuel system and VST assemblies
- Helps maintain proper fuel system sealing
- Helps reduce fuel leakage
- OEM Yamaha fit and material compatibility
- Common replacement during fuel system service
- Sold individually
Fuel Pump Gasket Details
- Brand: Yamaha
- Part Type: Fuel Pump Gasket
- OEM Part Number: 6CB-24482-00-00
- Application: Yamaha Fuel System / VST Assemblies
- System: Fuel Delivery System
- Use: Fuel pump and fuel system sealing
- Quantity Sold: Each
FAQ
What engines does this gasket fit?
This gasket fits select Yamaha F115 through F350 and VF-series outboards using compatible fuel system assemblies.
What does this gasket seal?
It seals compatible fuel pump and fuel system mating surfaces within the Yamaha fuel delivery system.
Is this used with Yamaha VST systems?
Yes. This gasket is commonly associated with compatible Yamaha VST and fuel system service applications.
Can a damaged fuel gasket cause fuel leaks?
Yes. A worn or damaged gasket may allow fuel leakage or improper fuel system sealing.
Should I replace related seals during service?
Yes. Many technicians replace related VST and fuel system seals during fuel system service to help prevent future leaks.
Should I verify fitment before ordering?
Yes. Yamaha used different fuel system configurations depending on model and production range, so diagram verification is recommended.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Fuel system components should be installed only after confirming correct fitment.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
6CB-24482-00-00, 6CB244820000, Yamaha fuel pump gasket, Yamaha fuel gasket, Yamaha VST gasket, Yamaha VST seal, Yamaha fuel system gasket, Yamaha F115 fuel gasket, Yamaha F200 fuel gasket, Yamaha F225 fuel gasket, Yamaha F250 fuel gasket, Yamaha F300 fuel gasket, Yamaha F350 fuel gasket, Yamaha VF200 fuel gasket, Yamaha VF225 fuel gasket, Yamaha VF250 fuel gasket, Yamaha fuel system seal, Yamaha VST service gasket
17670-94400
17670-94401
17670-94402
17670-94403
17670-94404
5031758
769184
6AW-83651-01-00
69J-83651-00-00
69J-83651-01-00
OEM Mercury Power Trim Seal Kit
Mercury EFI Power Trim Hydraulic O-Ring & Seal Kit
This genuine OEM Mercury power trim seal kit is used on select Mercury 105HP EFI Jet, 135HP EFI, and 150HP EFI FourStroke outboards.
The kit contains hydraulic O-rings and sealing components used during trim cylinder reseal service, hydraulic trim repair, and power trim maintenance.
Compatible Applications
| Horsepower | Engine Model | Serial Range | Application Notes |
|---|---|---|---|
| 105HP | Mercury EFI Jet | 3B672358 & Up | Power trim assembly components |
| 135HP | Mercury EFI FourStroke | 2B131942 & Up | Hydraulic trim and tilt systems |
| 150HP | Mercury EFI FourStroke | 1B905505 & Up | Power trim assembly components |
| 150HP | Mercury EFI Sea Pro | 2B139139 & Up | Commercial Sea Pro applications |
| 150HP | Mercury EFI Pro XS | 2B550139 & Up | Performance Pro XS models |
Always verify your engine horsepower, model type, and serial number before ordering hydraulic trim components and seal kits.
OEM Part Numbers & Cross References
| Type | Part Number |
|---|---|
| Mercury OEM Number | 8M0057770 |
What This Power Trim Seal Kit is Used For
This Mercury hydraulic trim seal kit is used during repair and reseal service of compatible Mercury power trim and tilt systems.
The included hydraulic O-rings and sealing components help seal trim cylinders, hydraulic passages, pistons, caps, and trim assembly components depending on trim system configuration.
Hydraulic seals commonly wear over time due to heat, hydraulic pressure, contamination, and marine operating conditions.
Replacing worn trim seals during hydraulic service can help reduce hydraulic fluid leaks and restore proper trim and tilt operation.
Key Features and Benefits
- Genuine OEM Mercury hydraulic trim seal kit
- Fits select Mercury EFI FourStroke trim systems
- Fits 105HP EFI Jet, 135HP EFI, and 150HP EFI models
- Includes hydraulic O-rings and sealing components
- Designed for trim cylinder reseal and repair service
- Helps reduce hydraulic fluid leaks
- Supports proper trim and tilt operation
- OEM Mercury hydraulic fit and compatibility
Power Trim Seal Kit Details
- Brand: Mercury Marine
- Part Type: Hydraulic O-Ring & Seal Kit
- OEM Part Number: 8M0057770
- Application: Mercury EFI FourStroke Power Trim Systems
- Horsepower Range: 105HP-150HP
- System: Power Trim & Tilt Hydraulic System
- Use: Hydraulic trim reseal and repair service
FAQ
What engines does this trim seal kit fit?
This kit fits select Mercury 105HP EFI Jet, 135HP EFI, and 150HP EFI FourStroke outboards depending on serial number range.
What is this seal kit used for?
This kit is used to reseal and service compatible Mercury hydraulic trim and tilt systems.
Is this a genuine Mercury part?
Yes. This is a genuine OEM Mercury hydraulic trim seal kit.
Should I verify my serial number before ordering?
Yes. Mercury used multiple trim system designs and hydraulic assemblies, so serial number verification is strongly recommended.
What are common signs of leaking trim seals?
Common symptoms may include hydraulic fluid leakage, trim drifting, weak trim operation, or inability to hold trim position.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Hydraulic and trim components should be installed only after proper diagnosis and inspection.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0057770, Mercury trim seal kit, Mercury power trim O-ring kit, Mercury hydraulic trim kit, Mercury 105 EFI Jet trim seals, Mercury 135 EFI trim seals, Mercury 150 EFI trim seals, Mercury Sea Pro trim kit, Mercury Pro XS trim seal kit, Mercury trim cylinder seal kit, Mercury power trim repair kit, Mercury hydraulic O-rings
8M0149746
6AW-81950-00-00
63D-45361-01-4D
63D-45361-02-4D
63D-45361-02-8D
814432