S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
Outboard Motor Parts | OEM & Aftermarket
Shop OEM and aftermarket outboard motor parts for Mercury, Yamaha, Suzuki, Honda, Johnson / Evinrude / E-TEC, Tohatsu / Nissan, and Chrysler / Force engines. Pro Marine USA carries parts for routine maintenance, troubleshooting, repair, and complete marine engine rebuilds.
Browse by outboard manufacturer or engine system, or use our OEM parts lookup to identify the correct part number before ordering. Find cooling, fuel, ignition, electrical, internal engine, lower unit, steering, trim, service kit, gasket, seal, and rebuild parts in one place.
Shop Outboard Parts by Manufacturer
Chrysler / Force Outboard Parts for Chrysler and Force outboard repair 
Honda Outboard Honda cooling, fuel, electrical, and engine parts 
Johnson / Evinrude / E-TEC Outboard Johnson, Evinrude, E-TEC, and OMC replacement parts 
Mercury Outboard Mercury and Mariner maintenance, repair, and rebuild parts 
Suzuki Outboard Suzuki service, lower unit, fuel, and engine parts 
Tohatsu / Nissan Outboard Tohatsu and Nissan outboard replacement parts 
Yamaha Outboard Yamaha maintenance, repair, lower unit, and rebuild parts Find the Correct Outboard Part
Not sure which part fits your engine? Start with the engine manufacturer, horsepower, model number, serial number, and year whenever available.
Our OEM parts lookup lets you view factory parts diagrams and identify the original part number for many popular outboard engines. Once you have the OEM number, search Pro Marine to find available OEM and aftermarket replacement options.
Use Our OEM Parts Lookup »Shop Outboard Parts by Engine System
Outboard engines use several interconnected systems. Select your manufacturer above to browse the exact categories available for your engine, including the following common repair and maintenance areas.
Common Outboard Problems and Where to Start
- Engine overheating: inspect the water pump, impeller, thermostat, pressure-control components, cooling passages, and engine anodes.
- Hard starting or rough idle: check fuel delivery, carburetor or injector operation, spark plugs, ignition components, filters, and intake sealing.
- Weak spark or no spark: test ignition coils, stators, switch boxes or ignition modules, sensors, wiring, grounds, and related electrical components.
- Low compression or poor power: inspect pistons, rings, cylinder condition, head and powerhead gaskets, bearings, and other internal engine components.
- Milky gear lube: inspect prop shaft, driveshaft, shift shaft, bearing carrier, and other lower unit seals for water intrusion.
- Lower unit or gearcase noise: inspect bearings, gears, clutch components, shafts, and gear lube condition before continued operation.
- Trim or steering problems: inspect hydraulic fluid level, seals, hoses, trim motors, pumps, steering cylinders, and mechanical connections.
Why Buy Outboard Parts from Pro Marine USA?
- OEM and aftermarket replacement options for major outboard engine brands.
- Marine engine parts for routine maintenance, professional repair, and complete rebuild projects.
- OEM diagram and part-number lookup tools to help identify the correct component before ordering.
- Dealer pricing available for qualified marine repair businesses and dealers.
- Large selection of service kits, engine parts, lower unit components, fuel system parts, electrical parts, steering, and rigging products.
- Same-day weekday shipping available on qualifying in-stock orders placed before the shipping cutoff.
OEM and Aftermarket Outboard Parts
OEM parts are supplied by the original engine manufacturer and are designed for the specific engine application. Aftermarket parts are replacement components produced by independent marine parts manufacturers and may provide additional availability or value for many common repairs.
Pro Marine carries both genuine OEM parts and quality aftermarket replacement parts for many outboard maintenance, repair, and rebuild applications. Always confirm fitment using the engine model, serial number, horsepower, year range, or OEM part number when available.
Frequently Asked Questions
How do I find the correct parts for my outboard motor?
Start by identifying the engine manufacturer, horsepower, model number, serial number, and year. Select the manufacturer above to browse by engine system, or use the OEM parts lookup to locate the original part number from a factory diagram.
Can I search Pro Marine by OEM part number?
Yes. If you already have the OEM part number, enter it into the Pro Marine site search to locate available OEM and aftermarket replacement options. If you do not know the part number, use the OEM parts lookup first.
What information should I have before ordering an outboard part?
Have the engine manufacturer, horsepower, model number, serial number, and year whenever possible. An OEM part number from the original component or parts diagram is especially helpful because visually similar parts may fit different engine families.
What is the difference between OEM and aftermarket outboard parts?
OEM parts come from the original engine manufacturer. Aftermarket parts are replacement components manufactured by other marine parts companies for compatible applications. Pro Marine carries both OEM and aftermarket options across many common outboard engine systems.
Are aftermarket outboard motor parts reliable?
Quality aftermarket marine parts are commonly used for maintenance, professional repair, and engine rebuilding. The best option depends on the application, manufacturer, availability, and customer preference.
Do you carry parts for older outboard motors?
Yes. Pro Marine carries parts for many older Mercury, Mariner, Johnson, Evinrude, Chrysler, Force, Yamaha, Honda, Suzuki, Nissan, and Tohatsu outboards. Availability varies by engine family and component.
What outboard parts are commonly replaced during routine maintenance?
Common maintenance items include engine oil, oil filters, fuel filters, spark plugs, water pump impellers, complete water pump kits, thermostats, gear lube, drain plug seals, anodes, and manufacturer-specific service kit components.
Fitment Tip: Outboard parts can vary by model, serial range, horsepower, and production year. Confirm the OEM part number or engine identification information whenever possible before ordering.
OEM Mercury Verado Anode Kit
Mercury V10 Verado 350HP-425HP Corrosion Protection Kit
This genuine OEM Mercury anode kit helps protect compatible Mercury 5.7L V10 Verado 350HP-425HP outboards from galvanic corrosion.
The kit includes replacement trim anodes, power trim anodes, transom anode hardware, washers, and mounting screws for complete corrosion protection service.
Compatible Applications
| Engine Platform | Horsepower Range | Displacement | Application Notes |
|---|---|---|---|
| Mercury Verado V10 | 350HP-425HP | 5.7L FourStroke | Select Verado V10 outboards |
Regular inspection and replacement of worn anodes is recommended, especially for saltwater applications.
What is Included
| Qty | Included Component | Application |
|---|---|---|
| 2 | Trim Anodes | Outboard trim system protection |
| 2 | Power Trim Anodes | Hydraulic trim corrosion protection |
| 1 | Transom Anode | Transom assembly protection |
| Included | Washers & Mounting Screws | Anode installation hardware |
OEM Part Numbers & Cross References
| Brand | Part Number |
|---|---|
| Mercury OEM | 8M0207809 |
What This Anode Kit is Used For
This Mercury anode kit is used to help protect compatible Verado V10 outboards from galvanic corrosion caused by exposure to water, electrical currents, and dissimilar metals.
Sacrificial anodes help absorb corrosive activity before it can damage expensive outboard components such as the gearcase, trim system, mounting bracket, and transom components.
The included trim and power trim anodes are commonly replaced during routine maintenance or whenever excessive anode wear is present.
Mercury anodes are engineered to meet or exceed MIL-A-24779(SH) military specifications for long-lasting corrosion protection performance.
Key Features and Benefits
- Genuine OEM Mercury corrosion protection anode kit
- Fits Mercury 5.7L V10 Verado 350HP-425HP outboards
- Includes trim anodes, power trim anodes, and transom anode
- Includes washers and mounting screws
- Helps protect against galvanic corrosion
- Designed for freshwater and saltwater use
- Meets or exceeds MIL-A-24779(SH) specifications
- OEM Mercury fit and corrosion protection compatibility
Anode Kit Details
- Brand: Mercury Marine
- Part Type: Anode Kit / Corrosion Protection Kit
- OEM Part Number: 8M0207809
- Application: Mercury Verado V10 FourStroke
- Horsepower Range: 350HP-425HP
- Displacement: 5.7L V10
- Water Type: Freshwater & Saltwater Compatible
- System: Corrosion Protection / Trim System
FAQ
What engines does this anode kit fit?
This kit fits compatible Mercury 5.7L V10 Verado 350HP-425HP FourStroke outboards.
What is included in this anode kit?
The kit includes two trim anodes, two power trim anodes, one transom anode, washers, and mounting screws.
Can this anode kit be used in saltwater?
Yes. Mercury states this kit is designed for both freshwater and saltwater applications.
Why are anodes important?
Sacrificial anodes help protect expensive metal outboard components from galvanic corrosion and electrolysis.
How often should anodes be replaced?
Anodes should be inspected regularly and replaced whenever excessive wear or deterioration is present.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Terms
8M0207809, Mercury anode kit, Mercury Verado anode kit, Mercury 350HP Verado anodes, Mercury 400R anodes, Mercury 425HP Verado anodes, Mercury V10 corrosion kit, Mercury power trim anodes, Mercury transom anode, Mercury sacrificial anodes, Mercury corrosion protection kit, Mercury V10 trim anodes
225hp EFI
Yamaha
2 Stroke
115hp 1984-2010
130hp 1984-2004
150hp 1984-2009
175hp 1984-2000
200hp 1984-1999
225hp 1990-1997
250hp 1990-1995
S115, S130, S150, S175, S200, S225, S250
LX / LZ 150, 200, 250, 300
V150, 175, 200, 225
VZ/Z 150, 175, 200, 225, 250, 300
4 Stroke
F75 2017 & Up
F90 2016 & Up
F115 2000 & Up
F150 2004 & Up
F175 2014 & Up
F200 2002 & Up
F225 2002-2018
F250 2005-2018
8814372
93210-54M14-00
93210-54534-00
93210-55M14-00
93210-55051-00
35-825467T02
6G8-13440-00-00
825467A1
825467T02
825467T1
69J-83672-11-00
69J-83672-12-00
6D0-45332-00-94
GLM Marine Replacement Component
Yamaha V4 V6 115-300HP & Mercury 225/250 Driveshaft Collar
The GLM 9076GM Driveshaft Collar is an aftermarket replacement designed for Yamaha and Mercury outboards utilizing Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901. Installed within the water pump assembly, this collar helps maintain proper alignment of critical cooling system components.
Whether you're rebuilding a complete water pump, servicing a lower unit, or performing preventative maintenance, the GLM 9076GM offers a dependable replacement option for a wide range of Yamaha V4 and V6 outboards as well as Mercury EFI FourStroke models.
OEM Numbers & Cross References
The GLM 9076GM cross references directly to Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
| Manufacturer | Part Number |
|---|---|
| GLM Marine | 9076GM |
| Yamaha OEM | 61A-45527-00-00 |
| Mercury OEM | 8886901 |
| Pro Marine | 45527P |
| Sierra | 18-9076 |
| Mercury OEM Part | 45527 |
Compatible Applications
Yamaha OEM 61A-45527-00-00 is used across a broad range of Yamaha V4 and V6 engines, including many Saltwater Series, EFI, OX66, VMAX, and four-stroke models. Mercury OEM 8886901 is commonly found on Mercury 225 and 250 EFI FourStroke outboards.
| Manufacturer | Common Applications |
|---|---|
| Yamaha | 115HP, C115, S115 |
| Yamaha | 130HP, L130 |
| Yamaha | 150HP, C150, D150, DX150, FL150, LF150, LX150, SX150, VX150, VZ150, Z150 |
| Yamaha | 175HP Models |
| Yamaha | 200HP, F200, LF200, LX200, SX200, VX200, VZ200, Z200 |
| Yamaha | 225HP, F225, LF225, LX225, VX225, V225, OX66 225, VMAX 225 |
| Yamaha | 250HP, L250, LX250, SX250, VX250, VZ250, Z250, OX66 250 |
| Yamaha | 300HP, LZ300, VZ300, Z300 |
| Mercury | 225 EFI FourStroke |
| Mercury | 250 EFI FourStroke |
Yamaha used several lower unit and water pump designs across various engine families. Always confirm your OEM part number before ordering.
This GLM collar replaces Yamaha OEM 61A-45527-00-00 and Mercury OEM 8886901.
Alternative Brands Available
Mercury OEM 45527
Genuine Mercury factory replacement for customers seeking original equipment parts.
View OEM Version
Pro Marine 45527P
Popular aftermarket replacement used by marine repair shops and technicians.
View Pro Marine Version
Designed for Water Pump Service & Rebuilds
The driveshaft collar works as part of the lower unit cooling system assembly. During water pump service, technicians frequently inspect and replace collars, spacers, wear plates, seals, and impellers together to help restore proper cooling system performance.
Because these components operate in a harsh marine environment, replacing worn parts during maintenance can help reduce the likelihood of future cooling system issues.
GLM 9076GM Features
- Replaces Yamaha OEM 61A-45527-00-00
- Replaces Mercury OEM 8886901
- Fits Yamaha V4 and V6 applications from 115HP through 300HP
- Fits Mercury 225 and 250 EFI FourStroke models
- Designed for lower unit cooling system repairs
- Ideal for water pump rebuilds and preventative maintenance
- Cost-effective aftermarket replacement
Why Choose GLM Marine Parts?
GLM Marine has supplied aftermarket marine engine components for decades and is well known throughout the boating industry for offering dependable replacement parts for outboard, sterndrive, and inboard applications.
The GLM 9076GM provides boat owners and marine technicians with a practical alternative to OEM components while maintaining compatibility with the original application.
FAQ
What OEM numbers does GLM 9076GM replace?
Yamaha 61A-45527-00-00 and Mercury 8886901.
What engines commonly use this driveshaft collar?
Many Yamaha V4 and V6 engines from 115HP through 300HP as well as Mercury 225 and 250 EFI FourStroke models.
Is this a genuine Mercury part?
No. This is a GLM Marine aftermarket replacement. The Mercury OEM version is linked above.
Do you stock other brands?
Yes. We also carry Mercury OEM, Pro Marine, and Sierra versions of this driveshaft collar.
When should this part be replaced?
The collar should be inspected during water pump service and replaced if wear, corrosion, or damage is present.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or marine industry professional? We offer dealer pricing for qualified businesses.
Shipping Policy
- Free shipping on orders over $100 continental U.S.
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1-5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Parts must be new and unused.
- Installed parts are not returnable.
- Return authorization required before returning merchandise.
Need assistance?
Contact Us
Phone: 941-721-3000
Searchable Terms
GLM 9076GM, 9076GM, Yamaha 61A-45527-00-00, Mercury 8886901, Yamaha V4 driveshaft collar, Yamaha V6 driveshaft collar, Yamaha OX66 water pump parts, Yamaha VMAX cooling system parts, Yamaha 225 driveshaft collar, Yamaha 250 driveshaft collar, Mercury 225 EFI FourStroke driveshaft collar, Mercury 250 EFI FourStroke driveshaft collar, Pro Marine 45527P, Sierra 18-9076, Mercury OEM 45527, GLM Marine replacement parts
61A-45527-00-00
8886901
PT627NM
6D8-43880-00-00
6D8-43880-01-00
6D8-43880-08-00
6D8-43880-09-00
8M6007566
8M6014135
90282-04010-00
115hp 1999 and Up
130hp 199-2004
175hp 2007 and Up
200hp 2003 and Up
225hp 2002 and Up
250hp 2007 and Up
Tohatsu
200hp 2014-2023
225hp 2014-2023
250hp 2014-2023
91356-SD4-952
3F0-87122-2
3F0871220
3F0871220M
3F0871221
3F0871221M
3F0871222
3F0871222M
3F0871223
3F0871223M
6A1-W0093-01-00
6A1-W0093-02-00
813485M
Fits Honda BF115, BF135 & BF150 Outboards
Designed for Honda BF115, BF135, and BF150 outboards using the 36120-ZY6 trim motor family. The 6235 Trim Motor is a replacement power trim and tilt motor used to raise and lower the outboard. It replaces Honda OEM part numbers in the 36120-ZY6 series and is used on Honda mid-range 4-stroke applications.
Compatibility
This trim motor fits select Honda BF115, BF135, and BF150 outboards. It is used in the power trim and tilt system and replaces Honda part numbers 36120-ZY6-013, 36120-ZY6-023, and 36120-ZY6-033.
Application Chart
| Brand | Engine Model | Horsepower | Engine Type | Component |
|---|---|---|---|---|
| Honda | BF115 | 115 HP | 4-Stroke | Power Trim & Tilt Motor |
| Honda | BF135 | 135 HP | 4-Stroke | Power Trim & Tilt Motor |
| Honda | BF150 | 150 HP | 4-Stroke | Power Trim & Tilt Motor |
Always confirm compatibility using your engine serial number and existing part number before ordering.
Part Numbers & Cross References
| Reference Type | Part Number |
|---|---|
| Pro Marine Part | 6235 |
| Cross Reference # | 18-6745 |
| Cross Reference # | 36120-ZY6-013 |
| Cross Reference # | 36120-ZY6-023 |
| Cross Reference # | 36120-ZY6-033 |
What This Part Is Used For
The trim motor powers the hydraulic trim and tilt system, allowing the outboard to raise and lower properly. This helps with performance, trailering, shallow-water operation, and dialing in the correct running angle on the water.
If the trim motor becomes weak or fails, the engine may move slowly, stop responding, or fail to trim at all. Replacing the motor helps restore proper trim and tilt operation and keeps the system working as intended.
Frequently Asked Questions
What engines does this trim motor fit?
This trim motor fits Honda BF115, BF135, and BF150 outboards using the 36120-ZY6 motor family.
What OEM numbers does this replace?
It replaces Honda part numbers 36120-ZY6-013, 36120-ZY6-023, and 36120-ZY6-033.
Does this include the full trim assembly?
No. This listing is for the trim motor only unless otherwise noted on the product page.
What are common signs of a failing trim motor?
Slow trim movement, no movement, intermittent operation, or clicking without motor operation can all indicate trim motor problems.
Dealer Discounts & Store Policies
Dealer / Marine Industry Discounts
Are you a marine dealer, technician, boat builder, or industry professional? We offer dealer pricing for qualified marine businesses.
Shipping Policy
- Free shipping on orders over $100 (continental U.S.).
- Orders ship via UPS, USPS, and FedEx.
- Orders received before 5:30 PM EST ship the same business day.
- Typical delivery time is 1–5 business days.
30-Day Return Policy
- Returns accepted within 30 days of delivery.
- Items must be new, unused, and in original packaging.
- Return authorization is required before sending items back.
Need help with a return or order question?
Contact Us
Phone: 941-721-3000
Searchable Part Numbers
Part Number: 6235
Cross Reference #: 18-6745, 36120-ZY6-013, 36120-ZY6-023, 36120-ZY6-033
Common Search Terms: Honda BF115 trim motor, Honda BF135 trim motor, Honda BF150 trim motor, 36120-ZY6-033 trim motor, Honda power trim tilt motor
HZY636120023
HZY636120033
18-6745
36120-ZY6-013
36120-ZY6-023
36120-ZY6-033
330-454
36120-ZY3-003
36120-ZY3-013
36120-ZY3-023