Yamaha OEM 69J-82563-00-00 Trim and Tilt Switch

The Yamaha 69J-82563-00-00 Trim and Tilt Switch is a genuine Yamaha OEM power trim and tilt switch used on select Yamaha outboards across multiple engine families.

Supplied Yamaha application data shows this switch on select 25-300 HP 2-stroke and 4-stroke outboards, including F, LF, T, VF, VZ, Z, and LZ-series engines. Yamaha 69J-82563-01-00 supersedes the original 69J-82563-00-00 part number.

Product Information

• Part Number: 69J-82563-00-00
• Brand: Genuine Yamaha OEM
• Part Type: Power Trim and Tilt Switch
• General Fitment: Select Yamaha 25-300 HP
• Engine Types: Select 2-Stroke and 4-Stroke Applications
• Superseded To: 69J-82563-01-00
• Aftermarket Alternative: Pro Marine 69J82563P

Important Fitment Note

This switch does not fit every Yamaha outboard from 25-300 HP. The horsepower range is a convenient summary of the supplied Yamaha application data.

Yamaha used different trim and tilt switches depending on engine family, model year, control configuration, and rigging system.

Verify the complete Yamaha engine model and, whenever possible, the original trim-switch part number before ordering.

OEM and Cross Reference Numbers

What This Part is Used For

The trim and tilt switch provides operator input to the power trim and tilt system on compatible Yamaha outboards.

Pressing the switch commands the system to raise or lower the engine. This allows the operator to adjust engine angle during operation and to raise the outboard farther when appropriate for trailering, servicing, or shallow-water situations.

Compatible Yamaha Applications

The supplied Yamaha catalog application data has been interpreted below into engine families and useful year ranges. These ranges represent the listed applications for this switch and should not be interpreted as universal fitment for every engine of the same horsepower.

Common Symptoms and Replacement Reasons

• Trim or tilt does not respond when the switch is pressed.
• UP or DOWN function works intermittently.
• One direction works while the other does not.
• Switch button or housing is physically damaged.
• Wiring or connector at the switch is damaged or corroded.
• Water intrusion has caused unreliable switch operation.
• Original switch is being replaced during Yamaha engine service or restoration.

A failed trim function does not automatically mean the trim switch is defective. Wiring, connectors, relays, fuses, battery voltage, and the trim motor should also be inspected during diagnosis.

Installation Tips

• Disconnect battery power before servicing the trim and tilt electrical system.
• Compare the replacement switch, connector, and wiring with the original part before installation.
• Inspect mating terminals and nearby wiring for corrosion or damage.
• Route and secure wiring so it cannot be pinched, pulled, or chafed.
• After installation, test both the UP and DOWN functions.

Key Features and Benefits

• Genuine Yamaha OEM: Factory Yamaha replacement component.
• Original Equipment Fit: Designed for the specifically listed Yamaha applications.
• Wide Catalog Coverage: Found across select Yamaha 25-300 HP engine families.
• 2-Stroke and 4-Stroke Applications: Includes specific four-stroke, SHO, and HPDI families.
• Superseded OEM Number: 69J-82563-01-00 replaces 69J-82563-00-00.
• Aftermarket Option Available: Pro Marine 69J82563P is available as an alternative.

Frequently Asked Questions

What does Yamaha 69J-82563-00-00 fit?

The supplied Yamaha application data lists this trim and tilt switch on select Yamaha 25-300 HP outboards, including specific F, LF, T, VF, VZ, Z, and LZ engine families.

Does it fit every Yamaha 25-300 HP outboard?

No. The horsepower range summarizes the listed applications. Fitment depends on the exact Yamaha model, year, and trim-switch configuration.

What supersedes Yamaha 69J-82563-00-00?

Yamaha 69J-82563-01-00 supersedes 69J-82563-00-00.

Is this a genuine Yamaha part?

Yes. This listing is for the genuine Yamaha OEM trim and tilt switch.

Does this fit Yamaha SHO outboards?

The supplied catalog data includes specific VF115, VF150, VF175, VF200, VF225, and VF250 SHO applications. Verify the complete engine model before ordering.

Does this fit Yamaha HPDI engines?

The supplied catalog data includes specific VZ, Z, and LZ-series HPDI applications from 200 through 300 HP. Exact model verification is required.

If my trim does not work, is the switch definitely bad?

No. A power trim problem can also be caused by wiring, connectors, relays, fuses, battery voltage, or the trim motor. Diagnose the system before replacing components.

Is a less expensive aftermarket version available?

Yes. Pro Marine USA also offers the Pro Marine 69J82563P trim and tilt switch for compatible applications.

Searchable Part Numbers

69J-82563-00-00, 69J-82563-01-00, 704-82563-40-00, 704-82563-41-00, 704-82563-42-00, 69J82563P, 69J825630000, 69J825630100, 704825634000, 704825634100, 704825634200

Searchable Terms

Yamaha OEM trim switch, Yamaha trim and tilt switch, Yamaha power trim switch, Yamaha 25-300 HP trim switch, Yamaha 2-stroke trim switch, Yamaha 4-stroke trim switch, Yamaha SHO trim switch, Yamaha HPDI trim switch, Yamaha F150 trim switch, Yamaha F200 trim switch, Yamaha F225 trim switch, Yamaha F250 trim switch, Yamaha F300 trim switch, Yamaha VF250 trim switch, Yamaha VZ250 trim switch, 69J-82563-00-00, 69J-82563-01-00

Genuine Yamaha OEM Carburetor Repair Kit

Yamaha and Mercury 25–40 HP Carburetor Kit with Float – 67930

The Genuine Yamaha 67930 Carburetor Repair Kit with Float is designed for servicing compatible Yamaha and Mercury 4-stroke outboard carburetors. This OEM repair kit is associated with Yamaha part numbers 65W-W0093-00-00, 65W-W0093-01-00, 65W-W0093-02-00, 67C-W0093-00-00 and 67C-W0093-01-00.

Applications include select Yamaha F25 and T25 25 HP, F30 30 HP, and F40 40 HP 4-stroke outboards, along with compatible Mercury 25, 30 and 40 HP 4-stroke engines.

This kit provides OEM replacement components for carburetor service, including a float, to help restore proper fuel metering and carburetor operation.

Product Information

• Pro Marine USA Item Number: 67930
• Manufacturer: Genuine Yamaha OEM
• Product: Carburetor Repair Kit with Float
• Engine Type: 4-Stroke Outboard
• Yamaha Applications: Select F25, T25, F30 and F40 Models
• Mercury Applications: Select 25, 30 and 40 HP Models
• Horsepower Range: 25–40 HP
• Primary Yamaha Reference: 65W-W0093-02-00
• Mercury Cross Reference: 854256
• Aftermarket Alternative: Pro Marine 67930P

OEM and Cross Reference Numbers

The following numbers are associated with the Yamaha carburetor repair kit family. Confirm the original part number for your engine before ordering.

Note: Yamaha has used multiple carburetor repair kit numbers across different engine generations. The original OEM number and carburetor configuration should be verified.

What This Carburetor Repair Kit Is Used For

The carburetor regulates the air and fuel mixture delivered to the engine. Over time, fuel deposits, worn gaskets, damaged sealing components and float-related problems can affect carburetor operation.

The Genuine Yamaha 67930 kit is intended for rebuilding and servicing compatible carburetors rather than replacing the complete carburetor assembly.

Common Service Applications

• Carburetor rebuilding and maintenance
• Replacement of worn carburetor sealing components
• Float and fuel-level control service
• Repair of fuel leakage caused by failed carburetor components
• Service following fuel contamination
• Restoration of proper carburetor operation after cleaning
• Routine maintenance of older carbureted 4-stroke outboards

Important Fitment Note

This kit does not fit every Yamaha or Mercury 25–40 HP outboard.

Carburetor configurations and repair kit numbers vary by engine model, production year and serial number.

Yamaha model listings supplied for this product include 1998–2005 engines and additional 2006-and-later model families. These are catalog application listings and should not be interpreted as universal compatibility with all later engines.

Mercury applications must be checked against the engine serial number and carburetor diagram. Always verify the original OEM kit number before purchase.

Compatible Yamaha Outboard Applications

The supplied Yamaha fitment list includes F25, T25, F30 and F40 4-stroke outboard families. The following tables organize the original model listings into readable groups.

Yamaha F25 and T25 – 25 HP 4-Stroke

Yamaha F30 – 30 HP 4-Stroke

Yamaha F40 – 40 HP 4-Stroke

Compatible Mercury Outboard Applications

The supplied Mercury parts catalog identifies carburetor applications for select 25, 30 and 40 HP outboards. The table below preserves the model and serial ranges shown in the application chart.

Common Symptoms and Replacement Reasons

Carburetor problems may develop when fuel deposits accumulate or internal components wear. A repair kit may be appropriate after confirming that the carburetor requires service.

• Hard starting
• Rough or inconsistent idle
• Hesitation during acceleration
• Fuel leaking or overflowing from the carburetor
• Sticking or damaged float components
• Worn carburetor gaskets
• Fuel contamination or varnish buildup
• Carburetor disassembly during routine service

These symptoms are not exclusive to carburetor problems. Fuel delivery, ignition and other engine systems should also be inspected as appropriate.

Carburetor Rebuild and Installation Tips

• Confirm the engine model and original carburetor repair kit number.
• Work in a clean, well-ventilated area away from ignition sources.
• Shut off the fuel supply before disassembly.
• Inspect the carburetor body for corrosion or damage.
• Clean carburetor passages using appropriate methods.
• Inspect the float and needle valve seating surfaces.
• Replace the applicable gaskets and components supplied with the kit.
• Set float height according to the engine service manual.
• Follow the manufacturer's carburetor adjustment procedures.
• Check for fuel leaks after reassembly.
• Verify proper idle and throttle response before returning the engine to service.

Carburetor rebuilding requires careful assembly and adjustment. Incorrect float settings or improperly installed components can cause fuel-level and performance problems.

Key Features and Benefits

• Genuine Yamaha OEM: Factory Yamaha carburetor repair kit.
• Float Included: Supports service of the carburetor fuel-level control system.
• 4-Stroke Applications: Listed for select Yamaha and Mercury 25–40 HP outboards.
• Multiple OEM References: Associated with several Yamaha carburetor repair kit numbers.
• Repair Alternative: Allows service of a compatible carburetor without automatically replacing the complete assembly.
• Aftermarket Option: Pro Marine 67930P is also available.
• Dealer Availability: Qualified marine businesses can apply for wholesale pricing.

Frequently Asked Questions

What is Yamaha carburetor kit 67930?

Part 67930 is Pro Marine USA's listing for a Genuine Yamaha carburetor repair kit with float. It is associated with Yamaha OEM part numbers including 65W-W0093-02-00.

What Yamaha engines use this carburetor kit?

The supplied application list includes select Yamaha F25, T25, F30 and F40 4-stroke outboard models. Exact compatibility depends on model and year.

Does this kit fit Yamaha F25 25 HP outboards?

Yes, selected F25 and T25 applications appear in the supplied fitment list. Confirm the specific model designation and OEM carburetor kit number.

Does this kit fit Yamaha F30 and F40 outboards?

The supplied fitment includes F30 30 HP and F40 40 HP 4-stroke engine families. Check the applicable carburetor diagram before ordering.

Does Yamaha 67930 fit Mercury outboards?

Mercury catalog applications supplied for this product include selected 25, 30 and 40 HP carbureted outboards. Confirm the engine serial number and Mercury cross-reference before ordering.

Is this a genuine Yamaha part?

Yes. This listing is for the Genuine Yamaha OEM version. Pro Marine USA also offers an aftermarket alternative under part number 67930P.

Does this carburetor kit include a float?

Yes. This product is listed as a carburetor repair kit with float.

Does this kit replace the complete carburetor?

No. It is a repair kit intended for servicing a compatible carburetor assembly. The complete carburetor is not included.

What is the difference between 67930 and 67930P?

Part 67930 is the Genuine Yamaha OEM version. Part 67930P is the Pro Marine aftermarket alternative for compatible applications.

How do I confirm the correct carburetor repair kit?

Use the engine model and serial number to identify the carburetor assembly in the manufacturer's parts diagram. Confirm that the repair kit number matches one of the listed references.

Dealer Discounts and Store Policies

Wholesale Marine Parts Pricing

Pro Marine USA supplies genuine OEM and aftermarket marine engine parts to marine repair shops, professional technicians, boat dealers and retail customers.

Qualified marine businesses can apply for a dealer account to access wholesale pricing on eligible products.

Apply for Dealer Pricing

Shipping Information

• Free shipping on orders over $100 in the continental United States.
• In-stock orders received before 5:30 PM EST ship the same business day, Monday–Friday.
• Shipping services include UPS, USPS and FedEx.
• Typical delivery time is 1–5 business days.

Returns

• Eligible returns are accepted within 30 days.
• Parts must be new, unused and in original packaging.
• Installed parts are not returnable.
• Return authorization is required.

Need help confirming fitment? Contact Pro Marine USA or call 941-721-3000.

Searchable Part Numbers

67930, 67930P, 65W-W0093-00-00, 65W-W0093-01-00, 65W-W0093-02-00, 67C-W0093-00-00, 67C-W0093-01-00, 854256

Searchable Terms

Genuine Yamaha carburetor kit, Yamaha 67930 carburetor repair kit, Yamaha carburetor kit with float, Yamaha F25 carburetor repair kit, Yamaha T25 carburetor repair kit, Yamaha F30 carburetor rebuild kit, Yamaha F40 carburetor repair kit, Yamaha 25 HP carburetor kit, Yamaha 30 HP carburetor kit, Yamaha 40 HP carburetor kit, Mercury 25 HP carburetor repair kit, Mercury 30 HP carburetor kit, Mercury 40 HP carburetor kit, Mercury 854256 carburetor kit, Yamaha 65W-W0093-02-00, Yamaha 67C-W0093-00-00, Yamaha four stroke carburetor kit, OEM outboard carburetor rebuild kit, marine carburetor repair kit with float